Le 2017-08-07 20:25, Iam Droidzone a écrit :
Sorry I meant canon_dr.conf, not canon_pp.conf. The former is where I
have tried inserting the line, after doing it in pixma.conf didnt work
On Mon, Aug 7, 2017 at 11:25 PM, Thierry HUCHARD
<thie...@substantiel.fr> wrote:
Le 2017-08-07 18:28, Iam Droidzone a écrit :
I've been trying to get the Canon Pixma G2000 to work with Ubuntu
16.04.
I tried:
sane-find-scanner
# sane-find-scanner will now attempt to detect your scanner. If
the
# result is different from what you expected, first make sure
your
# scanner is powered up and properly connected to your computer.
# No SCSI scanners found. If you expected something different,
make
sure that
# you have loaded a kernel SCSI driver for your SCSI adapter.
could not fetch string descriptor: Pipe error
could not fetch string descriptor: Pipe error
found USB scanner (vendor=0x04a9 [Canon], product=0x1795 [G2000
series]) at libusb:001:010
could not fetch string descriptor: Pipe error
could not fetch string descriptor: Pipe error
# Your USB scanner was (probably) detected. It may or may not be
supported by
# SANE. Try scanimage -L and read the backend's manpage.
# Not checking for parallel port scanners.
# Most Scanners connected to the parallel port or other
proprietary
ports
# can't be detected by this program.
On trying scanimage -L:
No scanners were identified. If you were expecting something
different,
check that the scanner is plugged in, turned on and detected by
the
sane-find-scanner tool (if appropriate). Please read the
documentation
which came with this software (README, FAQ, manpages).
root@hp:/etc/sane.d# gedit /usr/local/etc/sane.d/dll.conf
systemctl status saned.socket:
● saned.socket - saned incoming socket
Loaded: loaded (/lib/systemd/system/saned.socket; enabled;
vendor
preset: enabled)
Active: active (listening) since Mon 2017-08-07 21:16:38 IST;
28min
ago
Listen: [::]:6566 (Stream)
Accepted: 0; Connected: 0
Aug 07 21:16:38 hp systemd[1]: Listening on saned incoming socket.
Aug 07 21:34:26 hp systemd[1]: Listening on saned incoming socket.
The printing function is working with gutenprint. If only scanning
too
worked, I could finally get Windows off the partition!
Could anyone tell me if it's possible to tweak up support for this
printer? I can provide logs for anything needed. It's a simple
flatbed
usb scanner on a multifunction printer.
-Droidzone
You may want to try the following line in /etc/sane.d/pixma.conf:
usb 0x04a9 0x1795
usb 0x04a9 0x1795
Normalement c'est le backend pixma que vous devez utiliser.
Par conséquent la ligne doit seulement être ajouter dans pixma.conf
Regarder dans /etc/sane.d/dll.conf
#pixma
remplacer par
pixma
--
sane-devel mailing list: sane-devel@lists.alioth.debian.org
http://lists.alioth.debian.org/cgi-bin/mailman/listinfo/sane-devel
Unsubscribe: Send mail with subject "unsubscribe your_password"
to sane-devel-requ...@lists.alioth.debian.org
