Hello Professionals,
This is *Bharath kumar* from *KRG Technologies; *We are looking for an *Hardware Design Engineer in Redmond, WA *the below mentioned job description. Kindly forward me your resume, rate and contact details for further process. I also request you to forward this opportunity to your friends or colleagues; so that we can help someone who may be in search of a job or looking for a change. ============================================================================================================================================================================================== *Role: **Hardware Design Engineer* *Location: Redmond, WA* *Duration: 6+ months* Job Responsibilities • Design, develop and maintain robotic test automation systems. This will include electro-mechanical systems such as synchro/servos, conductive bearings, flex cables, solenoids, power supplies, gearing, plastic assemblies and a wide variety of other components. • Be readily able to examine a problem and create a conceptual design that could be developed into a working solution in short order. • Design, develop, integrate, debug, document, and support functional test solutions for complex printed circuit board assemblies and systems. • Partner with internal teams to develop and support test solutions for new product testing. Leverage existing solutions as appropriate. • Design and develop schematics, state diagrams and drawings to support design and development of a given solution. • Assemble prototypes, solder circuit boards and perform testing to verify operation. • Design test automation solutions to enable work on black-box hardware, often requiring reverse-engineering. Skills Required • Excellent communication, teamwork, and documentation skills. • Strong and reliable work ethic; able to drive a project to completion, often without access to management. • Experience building or servicing robotics or other devices that use synchros, servos, motors and solenoids. • Be able to create (from scratch) and edit existing circuit board designs and schematics (in EagleCAD initially, and Altium for more complex designs). • Ability to troubleshoot to root-cause and solve complex problems, and rapidly design viable and cost effective solutions. • Demonstrable knowledge with USB technology and specification for USB 1.0, 2.0 and 3.0. • Job involves very detailed technical tasks - must understand product specifications as well as test equipment operation, including load meters, oscilloscopes, current loops, multi-meters and power supplies. • Must have expertise in SMD soldering and Circuit Board QA. • Knowledge on standard communication protocols including RS-232 and RS-485 – (I2C and PM Bus is a big plus). • Experience in hardware prototype bring-up, debug, fault detection, failure analysis, and yield improvement. • 4+ years of experience developing and supporting test solutions for electronic products. • BS in Electrical Engineering or Computer Engineering (MSEE preferred), or equivalent work experience. Skills Desired • Experience with Orcad, SPICE, Cadence Allegro and Altium is preferred (Experience with EagleCAD is required). • C/C++ coding skills are desirable, to the point of being able to write automation hardware test applications. • Experience with AutoCAD and/or Solidworks. • Past experience with Smartphone, PDA or other Windows Mobile device highly desirable (repair and/or test). • Experience with mobile device battery technologies and battery charging systems · Experience assembling plastic enclosures using welding solvents such as MEK Thanks & Regards Bharath kumar KRG Technologies Inc. 25000 *|* Avenue Stanford *|* Suite 120 *|* Valencia, CA 91355 Direct Phone: 661-367-8000 EX: 505 | Fax: (661) 257-9968 Email: *[email protected]* <[email protected]> | *URL: * www.krgtech.com <www.krgtech.com> *Disclaimer:* If you have received this email in error or prefer not to receive such emails in the future, please reply with "REMOVE" in the subject line. All remove requests will be honored ASAP. We sincerely apologize for any inconvenience caused. -- You received this message because you are subscribed to the Google Groups "SAP ABAP" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To post to this group, send email to [email protected]. Visit this group at http://groups.google.com/group/sap-abap. For more options, visit https://groups.google.com/groups/opt_out.
