*Hi * *Please lookup the below position and if you feel comfortable ,then please send me your updated resume.*
*Position : Juniper Network engineer * *Location : Denver, CO* *Duration : 12+ Months* *Interview : Phone Hire* JNCIA, JNCIS, JNCIP, JNCIE a strong plus *Job Requirement* · Troubleshoot equipment and network problems and to open and track JTAC cases through to problem resolution on pre-production issues. · Raise equipment Return Material Authorizations (RMA’s) and to track these through to problem resolution · Produce a written summary report of the status of design projects, equipment and network problems, testing status on a regular basis to the Customer · Hold design and information gathering workshops with the Customer to understand the Customer’s existing network design and technical requirements of new network designs. · Understand the Customer’s organizational structure and become familiar with the Customer’s network implementation and support processes and procedures to help in designing a network that is available and sustainable. · Carry out testing of new designs, features, and functionality as required by the Customer in a laboratory environment and to help develop plans to implement and verify that they are operating correctly in the live network · Test software releases to ensure that they are implemented and functioning correctly in the pre-production test network and then live network as implementation plans dictate. · Hold technology workshops with the Customer to discuss equipment and network problems, and to provide case status updates, including the reasons for any problems encountered and the workarounds and/or solutions that are being tried · Train the Customer’s design, implementation and support personnel to configure and operate the Juniper Networks products · Support design and planning of Juniper M, MX, T, and PTX network routing products and associated solutions within the Customer infrastructure · Support ongoing efforts in defining best practice policies for Juniper product applications used by Customer · To peer with other employees performing similar Resident Engineering roles where lessons learned may help minimize risk associated with major network upgrades or changes in the network. · The Resident Engineer will be expected to develop secondary skills in other products in the Juniper product portfolio. *Typical Activities:* · Troubleshooting the network’s design and architecture issues · Analyzing network and device configurations · Providing network design leadership; assisting in identifying and building solutions · Testing product features and functionality · Providing deployment guidance to ensure that implementations are consistent with design specifications · Providing informal workshops to transfer knowledge to engineering staff · Applying industry best practices to the design, planning, and implementation of the network · Applying extensive industry experience to optimize network performance and proactively analyze potential enhancements · Evaluating technical specifications for interoperability *Skills and Experience:* · Candidates for this role MUST have a minimum of 5 years of experience providing implementation and technical support of networking products in LAN, WAN, or Internet services environments. · Preferred candidates for this position should have a Bachelor’s Degree in Engineering with JNCIE certification or equivalent experience. · Candidates MUST be able to demonstrate the following competencies: · Detailed technical experience in the installation and operation of IP routers. This includes hands-on operation of management tools and network analyzers. · A detailed understanding of the protocols surrounding IP service provider networks. These skills include but are not limited to: · TCP/IP and MPLS fundamentals · IP/Routing experience (OSPF, ISIS, BGP, RSVP, LDP, IPv6, Routing Policy) · Routing protocol operation, migration, and scaling mechanisms · Routing policies at BGP peering points · VPNs and the associated tunneling technologies (MPLS, L2/L3 VPN, VPLS, MVPN) · Ethernet switching and 802.1Q, QOS · Strong Interpersonal skills. · The ability to work independently and to function in a team environment. · Strong customer interface and presentation skills · Demonstrated ability to manage multiple projects and work calmly under pressure. *Focal Technologies* · The ideal candidate for this role will be able to demonstrate the following competencies: · *Juniper Hardware: M, T, MX, QFX, PTX series* · At least 5+ yrs of ISP experience · JUNOS CLI experience · Must understand BGP and MPLS VPNs · Experience with Multicast strongly preferred · Must be able to communicate effectively with the customer · Perl/Python/Shell scripting skills a plus · Test equipment such as Spirent, Agilent N2X, and Ixia a plus · Network management tools such as SNMP, Syslog, etc. · 3+ years of experience in managing large technical account activity revolving around network products from multiple vendors. *Regards , * *Kailash Negi* *VSG Business Solutions* *221 Cornwell Dr Bear, DE 19701* *Email ID : [email protected] <[email protected]>* *Phone: 302-261-3207 x 102* -- You received this message because you are subscribed to the Google Groups "American Vendor--IT Consulting" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To post to this group, send email to [email protected]. Visit this group at https://groups.google.com/group/sap-vendor. For more options, visit https://groups.google.com/d/optout.
