Hi,

Thank you for your feedback. It's a weird problem.

2009/3/28 Michał Durys <[email protected]>:
> In short: after some time (several hours or a few days) the output from
> LiquidSoap is muted.
> [...]
> I've noticed that if I start harbor input (called live in the script)
> LiquidSoap properly switches to it and sound can be heard. After harbor
> input terminates the script properly switches to the previous playlist and
> continues to operate properly for some time.

This makes me want to suspect the switch rather than the encoder. But
it's hard to imagine the switch messing like this. One thing you could
try is to stick a vumeter() operator at various places, to see if some
signal is passing through. I would start between the automatic source
and the live/auto switch, then above the switch. You'll need to run
liquidsoap in console because the vumeter outputs to stdout, and you
cannot have two vumeters at once (unless you use graphical vumeters,
it's unreadable).

If you can afford it, you can also setup a second output (in parallel,
not in sequence) perhaps in another format. This would confirm that
the encoder is not guilty.

> I'm about to move LiquidSoap to a different server. Then I will be able to
> leave LiquidSoap in this muted state and give you access to the logs. I hope
> this will allow you to find a solution.

That's a good idea in general, but in that case I would not bet too
much on it. We don't have that much inspection possibilities on a
running liq. However, if the bug happens reasonably frequently, we
might be able to tinker with the script in order to narrow down its
origin.

I hope that we can help each other on that problem,

David

------------------------------------------------------------------------------
_______________________________________________
Savonet-users mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/savonet-users

Reply via email to