Hello,
On 13 Jan 2012, at 00:45, Frédéric wrote:
>
> Hi,
>
> As far as I understand LS, it would perhaps be possible to:
> - duplicate your source (ie. source_A = source_B)
> - use "filter" on source_B to enable a high pass filter that would cut
> any frequency below 20 Khz
> - use "on_blank" to do nothing when source_B is blank, else your
> triggered action when not blank.
It could work. I'll have to set up a lab to test that :-)
>
> Another way to do this would be to add a third track to your stereo source.
> You'd be able to use audible "tops" on the third track without needing
> to duplicate and filter your original stereo source.
> And remove the third track before outputting the source.
As it comes from an FM broadcaster, I don't think they could synchronize a
second source with the main stream to send the top in this second source.
Thanks for the tip,
Jef
------------------------------------------------------------------------------
RSA(R) Conference 2012
Mar 27 - Feb 2
Save $400 by Jan. 27
Register now!
http://p.sf.net/sfu/rsa-sfdev2dev2
_______________________________________________
Savonet-users mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/savonet-users
