After I used the example provided in the cookbook to append a silence
track, I get a whole bunch of these while simulating a timeout from
harbor by disconnecting the vpn while the phone was streaming, and
there's no silence playing, it immediately switches to pulseaudio:
2023/05/21 22:02:16 [fail_0:3] Content type is {audio=pcm(stereo)}.
What does that mean, exactly? Should I be doing something for the
source.fail() portion of the code?
Thanks for your work, by the way!
On Sun May 21, 2023 at 6:43 PM CEST, Romain Beauxis wrote:
> Le sam. 20 mai 2023 à 23:08, Romain Beauxis <romain.beau...@gmail.com> a
> écrit :
>
> >
> > Le sam. 20 mai 2023 à 13:02, Tyna Pelletier-Bilodeau <ecole.t...@gmail.com>
> > a écrit :
> >
> >> Hi Romain,
> >> thank you, I will try this and see how it goes.
> >>
> >> By the way I've been toying a bit with harbor, and wondered if there was
> >> a way to have liquidsoap waiting a little in case the live drops out
> >> for a few seconds instead of immediately swtching back to the main
> >> source?
> >>
> >> I stream to the input over wireguard, which means sometimes I'm roaming
> >> to get a signal from 4g towers. I'd like if I could stream some silence
> >> instead of immediately falling back to the main source, which is another
> >> live done with input.pulseaudio, and which is jarring since the
> >> transition happens out of nowhere. Maybe up to say 10 seconds of delay
> >> before giving up and switching to the main source, is this possible?
> >>
> >
> > Yes, it's a pretty legit use-case. I'm sure it's possible right now but
> > might be a little tricky to setup. I'll think about what we can do to make
> > this easy to setup.
> >
>
> I have a PR making a couple of tweaks to make it possible:
> https://github.com/savonet/liquidsoap/pull/3098
>
>
> >
> >
> >> On Sat May 20, 2023 at 2:18 AM CEST, Romain Beauxis wrote:
> >> > Hi!
> >> >
> >> > Le ven. 19 mai 2023 à 02:39, Tyna Pelletier-Bilodeau <
> >> ecole.t...@gmail.com>
> >> > a écrit :
> >> >
> >> > > Hi,
> >> > > it looks like after a connection timeout with liquidsoap 2.1.4, it
> >> can't
> >> > > automatically retry to reconnect to icecast. I'm not sure weather it's
> >> > > because I use a tls enabled port or not, but in any event this
> >> shouldn't
> >> > > be happening. It is perfectly able to try reconnecting if for example
> >> > > the icecast server has a too low maximum number of sources allowed,
> >> but
> >> > > when it is already streaming, and out of nowhere there's a problem, it
> >> > > seems totally unable to do anything for itself.
> >> > >
> >> > > 2023/05/13 18:06:28 [asmrpmp3:3] Connection setup was successful.
> >> > > 2023/05/19 08:12:42 [asmrpmp3:2] Error while sending data: could not
> >> > > write data to host: connection timeout!
> >> > > 2023/05/19 08:12:42 [asmrpmp3:3] Closing connection...
> >> > > 2023/05/19 08:12:54 [clock.pulseaudio:2] Source asmrpmp3 failed while
> >> > > streaming: could not close connection: SSL connection() error:
> >> > > error:00000000:lib(0)::reason(0)!
> >> > > 2023/05/19 08:12:54 [clock.pulseaudio:2] Raised at Cry.close in file
> >> > > "src/cry.ml", line 193, characters 11-34
> >> > > 2023/05/19 08:12:54 [clock.pulseaudio:2] Called from
> >> > > Icecast2.output#icecast_stop in file "outputs/icecast2.ml", line 596,
> >> > > characters 14-34
> >> > > 2023/05/19 08:12:54 [clock.pulseaudio:2] Called from
> >> > > Icecast2.output#icecast_send in file "outputs/icecast2.ml", line 509,
> >> > > characters 10-27
> >> > > 2023/05/19 08:12:54 [clock.pulseaudio:2] Called from
> >> > > Output.encoded#send_frame.output_chunks.f in file "outputs/output.ml
> >> ",
> >> > > line 240, characters 10-24
> >> > > 2023/05/19 08:12:54 [clock.pulseaudio:2] Called from
> >> > > Output.output#output in file "outputs/output.ml", line 174,
> >> characters
> >> > > 10-35
> >> > > 2023/05/19 08:12:54 [clock.pulseaudio:2] Called from
> >> > > Clock.clock#end_tick.(fun) in file "clock.ml", line 300, characters
> >> > > 14-22
> >> > > 2023/05/19 08:12:54 [clock.pulseaudio:2]
> >> > > 2023/05/19 08:12:54 [asmrpmp3:3] Closing connection...
> >> > > 2023/05/19 08:12:54 [clock:2] Error when leaving output asmrpmp3:
> >> could
> >> > > not close connection: SSL connection() error: error:0A000126:SSL
> >> > > routines::unexpected eof while reading!
> >> > > 2023/05/19 08:12:54 [main:3] Shutdown started!
> >> > >
> >> > > Any ideas what I can do to mitigate this issue? I'm thinking of
> >> checking
> >> > > out the latest 2.2.x but I don't know if that has been solved or not,
> >> if
> >> > > it was even known to begin with, but I don't know how I could try this
> >> > > out if I'm using opam.
> >> > >
> >> >
> >> > This looks like a leak in the resources initializations.
> >> >
> >> > I would definitely try with `2.2.x`. The SSL stack was entirely
> >> rewritten
> >> > there and some resource cleaning issues were fixed. And we also have TLS
> >> > support now so you have two stacks to try if one still has issues.
> >> >
> >> > To use SSL/TLS in v2.2.x you can now pass an abstract transport
> >> variable.
> >> > This is explained here:
> >> > https://www.liquidsoap.info/doc-dev/harbor_http.html#https-support
> >>
> >>
> >>
> >> _______________________________________________
> >> Savonet-users mailing list
> >> Savonet-users@lists.sourceforge.net
> >> https://lists.sourceforge.net/lists/listinfo/savonet-users
> >>
> >
_______________________________________________
Savonet-users mailing list
Savonet-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/savonet-users
