Hello all,
As to feedback on Scid 3.6.24 rc1 I have this...
I noticed that the "Connect hardware" icon to the right of
the " Turn the side-to-move icon on or off" had NO
hinttext displayed when the mouse pointer (arrow) was
placed above it id est that it should have an hinttext displayed
when the mouse pointer is placed above it
like for example "Connect hardware" and that I
saw a few error messages when I tested this feature...
It should be noted before writing this that I had NO hardware
there to connect so some of the error messages might not be
errors in this feature...
1) Click on the Connect hardware icon with a red backwardslash
(a red "\" above the white and darkgrey icon):
"Scid: Input Engine
Unable to start the program:
/home/arwagner/bin/i383/dgtdrv2.i686/dev/tttyUSB0 la
OK"
"Input Engine Console
> sysinfo
Sending: Both White Black
Info"(Not any of "Both","White" or "Black" were selected)
"Application Error
Error cannot find channel named ""
"
"can not find channel named ""
can not find channel named ""
while executing
"puts $pipe $msg"
(procedure "::inputengine::sendToEngine" line 6)
invoked from within
"::inputengine::sendToEngine "sysinfo""
(procedure "::inputengine::sysinfo" line 6)
invoked from within
"::inputengine::sysinfo "
invoked from within
".inputengineconsole.bInfo invoke"
("uplevel" body line 1)
invoked from within
"uplevel #0 [list $w invoke]"
(procedure "tk::ButtonUp" line 24)
invoked from within
"tk::ButtonUp .inputengineconsole.bInfo"
(command bound to event)
"
2) "Tools/Connect Hardware/Config"
"Application Error
Error: named font "movefont" already ..."
"named font "moveFont" already exists
named font "moveFont" already exists
while executing
"font create moveFont -family Helvetica -size 39 -weight bold"
(procedure "consoleWindow" line 20)
invoked from within
"consoleWindow"
(procedure "::inputengine::connectdisconnect" line 7)
invoked from within
"::inputengine::connectdisconnect"
invoked from within
".inputengineConfig.f2.bOk invoke"
("uplevel" body line 1)
invoked from within
"uplevel #0 [list $w invoke]"
(procedure "tk::ButtonUp" line 24)
invoked from within
"tk::ButtonUp .inputengineConfig.f2.bOk"
(command bound to event)
"
3) "Tools/Connect Hardware/ToggleConnect"
"Application Error
Error: named font "movefont" already ...
"
"named font "moveFont" already exists
named font "moveFont" already exists
while executing
"font create moveFont -family Helvetica -size 39 -weight bold"
(procedure "consoleWindow" line 20)
invoked from within
"consoleWindow"
(procedure "::inputengine::connectdisconnect" line 7)
invoked from within
"::inputengine::connectdisconnect"
(menu invoke)
"
4) "Tools/Connect Hardware/Syncronise
"Application error:
Error invalid command name .inputen
"
"invalid command name ".inputengineconsole.console"
invalid command name ".inputengineconsole.console"
while executing
"$t insert end "$line\n""
(procedure "updateConsole" line 3)
invoked from within
"updateConsole "$msg""
(procedure "logEngine" line 3)
invoked from within
"logEngine "Sync called""
(procedure "::inputengine::synchronise" line 4)
invoked from within
"::inputengine::synchronise"
(menu invoke)
"
5) "Tools/Connect Hardware/Sysinfo"
"Application error:
Error invalid command name .inputen
"
"invalid command name ".inputengineconsole.console"
invalid command name ".inputengineconsole.console"
while executing
"$t insert end "$line\n""
(procedure "updateConsole" line 3)
invoked from within
"updateConsole "$msg""
(procedure "::inputengine::logEngine" line 3)
invoked from within
"::inputengine::logEngine "> $msg""
(procedure "::inputengine::sendToEngine" line 5)
invoked from within
"::inputengine::sendToEngine "sysinfo""
(procedure "::inputengine::sysinfo" line 6)
invoked from within
"::inputengine::sysinfo"
(menu invoke)
"
6) "Tools/Connect Hardware/Usercommand"
"Application error:
Error invalid command name .inputen
"
"invalid command name ".inputengineconsole.console"
invalid command name ".inputengineconsole.console"
while executing
"$t insert end "$line\n""
(procedure "updateConsole" line 3)
invoked from within
"updateConsole "$msg""
(procedure "::inputengine::logEngine" line 3)
invoked from within
"::inputengine::logEngine "> $msg""
(procedure "::inputengine::sendToEngine" line 5)
invoked from within
"::inputengine::sendToEngine display "
invoked from within
".inputengineSend.f2.bOk invoke"
("uplevel" body line 1)
invoked from within
"uplevel #0 [list $w invoke]"
(procedure "tk::ButtonUp" line 24)
invoked from within
"tk::ButtonUp .inputengineSend.f2.bOk"
(command bound to event)
"
So in short "Connect Hardware" seems to have problems
with missing hinttext for "Connect hardware",
no "Info" selected in Input Engine Console,
font "moveFont" id est "Helvetica",
invalid command name ".inputengineconsole.console"
when I tested it in Windows 98SE...
Best wishes,
Hans Eriksson
-------------------------------------------------------------------------
This SF.net email is sponsored by: Microsoft
Defy all challenges. Microsoft(R) Visual Studio 2008.
http://clk.atdmt.com/MRT/go/vse0120000070mrt/direct/01/
_______________________________________________
Scid-users mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/scid-users
