On Feb 14, 2011, at 7:43 PM, Adrian Petrescu wrote: > Hi scid-users, > > I decided to try running Scid on my OS X 10.6.6 machine. At first I tried > using the new 4.3 dmg binary, but there seems to be something corrupt about > it, because when I try to mount the .dmg I get a "not recognized" error.
This is entirely mis fault, I didn't check the file _after_ uploading it. I re-uploaded the image, it seems to download and open fine here, let me know if you have any other problem. > Okay, fair enough, so I went and checked out the source from CVS as I do on > Linux. I replaced Makefile.conf with Makefile.conf.darwin and built it > successfully. However, when I try to run it, the splash window appears and > loads, but then right before the main window should come up, it fails with: > > adrian:scid/ $ ./scid > num matched toplevel windows does not equal num children > [1] 36406 abort ./scid > > I tried Google'ing around for the source of this error and found a single > thread about it: > http://www.mail-archive.com/scid-users@lists.sourceforge.net/msg04972.htmlHowever, > it doesn't seem like the poster there arrived at a solution. That's a problem with the new Cocoa based Tk that ships with 10.6 and docked windows mode. I build the regular Tcl and Carbon based Tk 8.5.9 from source and use those to build Scid, there is no problem with that. Israel ------------------------------------------------------------------------------ The ultimate all-in-one performance toolkit: Intel(R) Parallel Studio XE: Pinpoint memory and threading errors before they happen. Find and fix more than 250 security defects in the development cycle. Locate bottlenecks in serial and parallel code that limit performance. http://p.sf.net/sfu/intel-dev2devfeb _______________________________________________ Scid-users mailing list Scid-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/scid-users
