On 02/19/2013 05:38 AM, Ken Teh wrote:
If the disks cannot be identified deterministically, then I cannot avoid
making my kickstart installs 2-stepped. Whether I pre-label the disks or
install the system with a single disk and add the second disk after the
install.
I appreciate the situation from the kernel's perspective. Driver loads,
disk
detection, etc. But it sure puts a crinkle in the beauty of a kickstart
install.
This needs to be tweaked for different systems, but:
clearpart --linux
--drives=/dev/disk/by-path/pci-0000:00:1f.1-scsi-0:0:0:0,/dev/disk/by-path/pci-0000:00:1f.1-scsi-1:0:0:0
part raid.1 --size=200
--ondisk=/dev/disk/by-path/pci-0000:00:1f.1-scsi-0:0:0:0
part raid.2 --size=200
--ondisk=/dev/disk/by-path/pci-0000:00:1f.1-scsi-1:0:0:0
part raid.3 --size=40000 --grow
--ondisk=/dev/disk/by-path/pci-0000:00:1f.1-scsi-0:0:0:0
part raid.4 --size=40000 --grow
--ondisk=/dev/disk/by-path/pci-0000:00:1f.1-scsi-1:0:0:0
If you have very different systems, that doesn't help much I'm afraid.
--
Orion Poplawski
Technical Manager 303-415-9701 x222
NWRA/CoRA Division FAX: 303-415-9702
3380 Mitchell Lane [email protected]
Boulder, CO 80301 http://www.cora.nwra.com
