On 04/09/15 22:26, ToddAndMargo wrote:
Just posted this one:
https://bugzilla.redhat.com/show_bug.cgi?id=1260226
Dear Red Hat,
$ rpm -qa \*qemu\*
qemu-img-1.5.3-86.el7_1.5.x86_64
qemu-guest-agent-2.1.0-4.el7.x86_64
libvirt-daemon-driver-qemu-1.2.8-16.el7_1.3.x86_64
qemu-kvm-1.5.3-86.el7_1.5.x86_64
ipxe-roms-qemu-20130517-6.gitc4bce43.el7.noarch
qemu-kvm-common-1.5.3-86.el7_1.5.x86_64
I am coming from the community: Scientific Linux 7.1.
Would one of our intrepid heroes please fix this for me?
If I am run a virtual machine, I can not mount (meaning to push into the
hole) any of my numerous USB flash drives: a /dev/sdx does not appear
until I shut my VM(s) back down. Then they will appear. This is a real
pain in the neck!
This appears in my messages log when trying to mount (meaning to push
into the hole):
Sep 4 13:15:56 localhost kernel: usb 10-1.3: USB disconnect, device
number 11
Sep 4 13:15:59 localhost kernel: usb 2-4.3: new high-speed USB device
number 7 using ehci-pci
Sep 4 13:15:59 localhost kernel: usb 2-4.3: New USB device found,
idVendor=0951, idProduct=168e
Sep 4 13:15:59 localhost kernel: usb 2-4.3: New USB device strings:
Mfr=1, Product=2, SerialNumber=3
Sep 4 13:15:59 localhost kernel: usb 2-4.3: Product: DT Rubber 3.0
Sep 4 13:15:59 localhost kernel: usb 2-4.3: Manufacturer: Kingston
Sep 4 13:15:59 localhost kernel: usb 2-4.3: SerialNumber:
0018F3D97CE0FDA021BF02AC
Sep 4 13:15:59 localhost kernel: usb-storage 2-4.3:1.0: USB Mass
Storage device detected
Sep 4 13:15:59 localhost kernel: scsi host19: usb-storage 2-4.3:1.0
Sep 4 13:15:59 localhost mtp-probe: checking bus 2, device 7:
"/sys/devices/pci0000:00/0000:00:1d.7/usb2/2-4/2-4.3"
Sep 4 13:15:59 localhost mtp-probe: bus: 2, device: 7 was not an MTP
device
Sep 4 13:16:00 localhost kernel: scsi 19:0:0:0: Direct-Access Kingston
DT Rubber 3.0 1.00 PQ: 0 ANSI: 6
Sep 4 13:16:00 localhost kernel: sd 19:0:0:0: Attached scsi generic sg3
type 0
Sep 4 13:16:00 localhost kernel: sd 19:0:0:0: [sdc] 30216792 512-byte
logical blocks: (15.4 GB/14.4 GiB)
Sep 4 13:16:00 localhost kernel: sd 19:0:0:0: [sdc] Write Protect is off
Sep 4 13:16:00 localhost kernel: sd 19:0:0:0: [sdc] Write cache:
disabled, read cache: enabled, doesn't support DPO or FUA
Sep 4 13:16:00 localhost kernel: sdc: sdc1
Sep 4 13:16:00 localhost kernel: sd 19:0:0:0: [sdc] Attached SCSI
removable disk
Sep 4 13:16:01 localhost /etc/gdm/Xsession: (xfdesktop:3900):
GLib-GIO-CRITICAL **: g_file_get_path: assertion 'G_IS_FILE (file)' failed
Then after the above settles, an ls of /dev:
$ ls -al /dev/sd*
brw-rw----. 1 root disk 8, 0 Sep 4 09:54 /dev/sda
brw-rw----. 1 root disk 8, 1 Sep 4 09:54 /dev/sda1
brw-rw----. 1 root disk 8, 2 Sep 4 09:54 /dev/sda2
brw-rw----. 1 root disk 8, 3 Sep 4 09:54 /dev/sda3
brw-rw----. 1 root disk 8, 4 Sep 4 09:54 /dev/sda4
brw-rw----. 1 root disk 8, 5 Sep 4 09:54 /dev/sda5
brw-rw----. 1 root disk 8, 16 Sep 4 12:26 /dev/sdb
brw-rw----. 1 root disk 8, 17 Sep 4 12:26 /dev/sdb1
No sdc!
Many thanks,
-T
On 09/04/2015 03:37 PM, David Sommerseth wrote:
Have you enabled USB redirect in the VM guest? And do you happen to
have that active somewhere/somehow when you insert that USB drive? I
have accomplished to use USB stuff directly inside guests when
hotplugging USB devices. So I'd check what happens inside your VM
guest, and then consider to disable USB redirect if you don't need/want
that.
That was it. I will write them back and say never mind.
Thank you!
