Hi everyone,
Thanks for all the interesting replies to my posting yesterday. I guessed it
was down to TUV. I will start by trying Troy's
suggestion as that seems to involve least work on my part!
Whenever I want this I do a
yum install "*"
Our experience was we never had a problem with dependencies, and we did avoid
having to continually add extra packages/libraries
on a piecemeal basis. We also guaranteed all our machines were set up the same
way. We only have around 15 user machines and they
tend to be installed in batches of one or two so just running through the
standard installation process is quite sufficient. We have
a standard post install script which turns off anything we don't want after the
installation. In fact each batch of one or two
machines often needs a tweak here or there to get it running, for example the last batch needed two or three extra kernel options to
run at all. If we had hundreds of identical machines to install at one go we would obviously see things differently. All of the
other suggestions unfortunately require more work on our part than just clicking Everything used to do - shame!
Here's a few comments on the comments
"yum install additional required packages,"
- But I have to know what the required packages are by all my users,
now and in the future !
"'cos the install time is long enough anyway!"
- That's the computer's time not mine so I don't care! Just come back
when it has got to firstboot.
"need to generate a comps.xml file which has all the packages listed as default in
some 'everything' grouping."
- need to learn what a comps.xml file is, and how to use it!
"You can still do a kickstart install with your ks config file listing all of the
rpms. "
- need to learn about kickstart
thanks again for the interesting discussion.
Alex
