Joe Kiskis wrote:
I have just installed SL 5. I'm getting a large number of messages of the
form
EDAC MC0: UE page 0xbf1 offset 0x0 grain 4096 row 0 labels ":" : i82875p
UE
Initially they were being sent to /var/log/messages and to all terminal
windows. I managed to get the latter to stop. They still go to
/var/log/messages at a rate of about one per second. The motherboard is A
SUS
P4C800 deluxe. I mention that because Googling reveals that this problem
was
seen with this motherboard a year ago with the 2.6.16 kernel. I cannot fi
nd
mention of a solution to the problem.
Since I do not see where an EDAC module is loaded, I'm guessing that the
EDAC code is built into the 2.6.18 kernel in SL 5 and is not loaded
separately. Is that correct?
I will appreciate suggestions on what's going wrong and how to fix it. Th
anks.
EDAC - Error Detection And Correction
http://www.mjmwired.net/kernel/Documentation/drivers/edac/
Linux-2.6.17/drivers/edac/i82875p_edac.c
binutils-2.17.50.0.6-build-fixes.patch
linux-2.6-proposed-i82875p-edac-fix
Parity errors give me headaches, I'd try another kernel, get a patch or
try some common kernel boot options (noacpi). Also, more details about
your hardware (CPU, Video, NIC, SATA RAID)?
Good Luck [EMAIL PROTECTED]
