Hello,
Hi All,
Except with xfig I have not experienced any trouble. Which locale
have you set
during the installation? My $LANG=en_US.UTF-8.
I have same locale...
O.k., I will try your advice.
thank you,
cheers,
Dusan
I do not know why, but xfig is for many years somehow incompatible
with modern
font installations. What I did, is to steel the accomodations of the source
code from the SuSE 9.3 distribution and compile xfig myself. If somebody
likes the source code, it's here for download:
http://cyclotron.tamu.edu/hees/tmp/xfig.3.2.5-full-SL5.0-HvH.tar.bz2
Note that you need to compile the transfig package before the xfig package.
Both, transfig and the original xfig source code can be found at
http://www.xfig.org/
Cheers,
Hendrik.
On Sat September 1 2007 09:45, Dusan Bruncko wrote:
Dear coleagues,
I have several problems with SLC5. Please look:
- xterm
Warning: locale not supported by Xlib, locale set to C
Warning: X locale modifiers not supported, using default
Failed to open input method
but terminal will be open
- xfig
Warning: locale not supported by Xlib, locale set to C
Warning: X locale modifiers not supported, using default
Warning: Cannot convert string
"-*-times-medium-r-normal--14-*-*-*-*-*-*-*,-*-*-medium-r-normal--14-*-*-*-
*-*-*-*,*--14-*" to type FontSet
Warning: Unable to load any usable fontset
Warning: Cannot convert string
"-*-times-medium-r-normal--14-*-*-*-*-*-*-*,-*-*-medium-r-normal--14-*-*-*-
*-*-*-*,-*-*-*-r-*--14-*-*-*-*-*-*-*" to type FontSet
Warning: Unable to load any usable fontset
Warning: Cannot convert string
"-*-times-bold-r-normal--14-*-*-*-*-*-*-*,-*-*-bold-r-normal--14-*-*-*-*-*-
*-*,-*-*-*-r-*--14-*-*-*-*-*-*-*" to type FontSet
Warning: Unable to load any usable fontset
Warning: Unable to load any usable fontset
Warning: Input Method Open Failed
Warning: Input Method Open Failed
Warning: Input Method Open Failed
but again, xfig started
- acroread
Warning: locale not supported by Xlib, locale set to C
Warning: X locale modifiers not supported, using default
Fatal System Error: Raise at top of Exception Stack
zsh: abort acroread
but I remember time, when acroread-5.0.10-1.el5.rf.i386.rpm worked
properly...
- if I looked on .xsession-errors, I see (as a root):
/etc/X11/xinit/xinitrc.d/localuser.sh: line 12: 3711 Segmentation
fault xhost +si:localuser:`id
-un`
No profile for user 'root' found
xset: bad font path element (#100), possible causes are:
Directory does not exist or has wrong permissions
Directory missing fonts.dir
Incorrect font server address or syntax
startkde: Starting up...
but
xhost
access control disabled, clients can connect from any host
INET:h8x.iep
/usr/bin/id
uid=0(root) gid=0(root)
groups=0(root),1(bin),2(daemon),3(sys),4(adm),6(disk),10(wheel)
id -un gives root
It means xhost and id works properly (I hope) and segmentation fault
goes from
xhost +si:localuser:`id -un`
- kprinter
Qt: Locales not supported on X server
I have last update...
What is wrong?
Thank you for help.
Best regards,
Dusan
--
Hendrik van Hees Texas A&M University
Phone: +1 979/845-1411 Cyclotron Institute, MS-3366
Fax: +1 979/845-1899 College Station, TX 77843-3366
http://cyclotron.tamu.edu/hees/ mailto:[EMAIL PROTECTED]
----------------------------------------------------------------
This message was sent using IMP, the Internet Messaging Program.
