Hi Larry,
Yes, there is a difference, but at the beginning they are the same.
If you do a "yum upgrade" and it replaced yum-conf-44 with yum-conf-4x, that is
going to keep you at 4x. Which means that when we have our new release 4.8,
and we move the link of 4x to point to 48, then your system is going to
automatically be updated to 48. This might be what some people want, which is
why there is a yum-conf-4x.
If you just use the long rpm command
rpm -Uvh
ftp://ftp.scientificlinux.org/linux/scientific/4x/i386/misc/RPMS/yum-conf-latest.SL.noarch.rpm
Then that will just get you the normal yum-conf wich is in the latest release.
So currently that will install yum-conf-4.7. That will then update you to SL
4.7. But when we release 4.8, and the 4x link get's changed, you will not be
automatically updated to 4.8, but will still be at 4.7. This might be what
some people want, which is why yum-xonf-4x isn't installed by default.
Does that help?
Troy
P. Larry Nelson wrote:
This is most likely a Troy or Connie question but thought I'd post
here in case others might have the same question burning in the
back of their brains.
Is there much, if any, difference between upgrading from one minor
release to another (say, SL44 to SL46) using the rpm command as
stated in the instructions in the HowTo here:
(https://www.scientificlinux.org/documentation/howto/upgrade.4x)
and just doing a 'yum upgrade; yum clean all; yum update' ?
It seems that the 'yum upgrade' grabbed the yum-conf-4x.noarch 4:1-5.SL
and replaced the yum-conf.noarch 4:44-1.SL, which is what I assume
the lonnng rpm command would do?
Thanks!
- Larry
--
__________________________________________________
Troy Dawson [EMAIL PROTECTED] (630)840-6468
Fermilab ComputingDivision/LCSI/CSI DSS Group
__________________________________________________
