Keith Lofstrom wrote:
I run SL5 on 6 machines, and am considering building a low power
browsing/email machine running SL5. It will probably use an Atom
mini-ITX board and a 30GB solid state drive - no moving parts, and
using less than 40 watts. I will do the usual /tmp in ramdisk
and "noatime" in /etc/fstab, among other flash-friendly tweaks.
Although the boot partition will be ext2/3 , I am considering
making the main partition with the JFFS file system - the
Journalling Flash File System. That is not built into the
SL5 kernel ... it is a module instead. I'm wondering if the
system will be able to find the JFFS module if /etc and /lib
and /bin are stored as JFFS. Probably not. Does anyone know?
ext3 is a module. In Debian, the IDE drivers were modules last I looked.
The trick is to learn how to get the modules into the initial ram disk,
that's read by the boot loader (using BIOS calls on peecees).
I don't recall how it all works on EL, I'd start by reading the mkinitrd
script. Again.
Once you figure it out, very little should change.
It might be as easy as adding a file to /etc/sysconfig/mkinitrd,
containing "MODULES=jffs2"
I can compile my own kernel, of course, but I lose the advantage
of automated updates. I can also build the main partition with
ext2/3, and move the frequently varying stuff like /var and
/home into separate JFFS partitions. I would rather use JFFS
for as much as I can, though. Updates could be extremely slow
if too much of the system is ext2/3 .
Ideas?
Keith
--
Cheers
John
-- spambait
[email protected] [email protected]
-- Advice
http://webfoot.com/advice/email.top.php
http://www.catb.org/~esr/faqs/smart-questions.html
http://support.microsoft.com/kb/555375
You cannot reply off-list:-)
