I am trying to build plplot on a Scientific-Linux 5.3 x86_64 system.
I am able to build the basic package, but would like to include other graphics
devices via qt4. Unfortunately, cmake cannot find the qt4 packages that I
have installed.
I have installed the rpms
qt4-4.2.1-1.x86_64
qt4-devel-4.2.1-1.x86_64
The command I use to run cmake is:
cmake -DCMAKE_INSTALL_PREFIX=/usr/local /opt/plplot-5.9.5 >& cmake.out
I get the error
- WARNING: Qt4 development environment not found so disabling all qt devices.
I found instructions on how to point cmake to non-standard locations by using:
export CMAKE_INCLUDE_PATH=/usr/lib64/qt4/include/
export CMAKE_LIBRARY_PATH=/usr/lib64/qt4/lib64/
I tried setting these but it didn't help.
I have attached the cmake.out file, in case it helps (I know I have a few other
things missing in the build..I am not worried about those...I just want the Qt4
part to work)
Has anyone tried to do this, or experienced a similar problem?
Thanks
Eve
***************************************************************
Eve Kovacs
Argonne National Laboratory,
Room E-217, Bldg. 362, HEP
9700 S. Cass Ave.
Argonne, IL 60439 USA
Phone: (630)-252-6208
Fax: (630)-252-5047
email: [email protected]
***************************************************************
-- The C compiler identification is GNU
-- Check for working C compiler: /usr/bin/gcc
-- Check for working C compiler: /usr/bin/gcc -- works
-- Detecting C compiler ABI info
-- Detecting C compiler ABI info - done
-- CMake version = 2.6.4
-- Checking whether system has ANSI C header files
-- Looking for include files StandardHeadersExist
-- Looking for include files StandardHeadersExist - found
-- Performing Test memchrExists
-- Performing Test memchrExists - Success
-- Performing Test freeExists
-- Performing Test freeExists - Success
-- Check for whether ctype.h macros work on characters with the
high bit set.
-- High-bit characters - work
-- ANSI C header files - found
-- Looking for include files PL_HAVE_UNISTD_H
-- Looking for include files PL_HAVE_UNISTD_H - found
-- Looking for include files HAVE_TERMIOS_H
-- Looking for include files HAVE_TERMIOS_H - found
-- Looking for include files PL_HAVE_STDINT_H
-- Looking for include files PL_HAVE_STDINT_H - found
-- Performing Test HAVE_SYS_WAIT_H
-- Performing Test HAVE_SYS_WAIT_H - Success
-- Looking for DIR in sys/types.h;dirent.h
-- Looking for DIR in sys/types.h;dirent.h - found
-- Check for signal return type in <signal.h>
-- Check for signal handler return type type void - found
-- Looking for popen
-- Looking for popen - found
-- Looking for usleep
-- Looking for usleep - found
-- Looking for finite
-- Looking for finite - found
-- Looking for isnan
-- Looking for isnan - found
-- Looking for isinf
-- Looking for isinf - found
-- Looking for snprintf
-- Looking for snprintf - found
-- SWIG_VERSION = 1.3.29
-- Found Perl: /usr/bin/perl
-- Looking for pkg-config - found
-- Looking for XOpenDisplay in /usr/lib64/libX11.so;/usr/lib64/libXext.so
-- Looking for XOpenDisplay in /usr/lib64/libX11.so;/usr/lib64/libXext.so -
found
-- Looking for gethostbyname
-- Looking for gethostbyname - found
-- Looking for connect
-- Looking for connect - found
-- Looking for remove
-- Looking for remove - found
-- Looking for shmat
-- Looking for shmat - found
-- Looking for IceConnectionNumber in ICE
-- Looking for IceConnectionNumber in ICE - found
-- Found X11: /usr/lib64/libX11.so
-- X11_FOUND = 1
-- X11_INCLUDE_DIR = /usr/include
-- X11_COMPILE_FLAGS = -I/usr/include
-- X11_LIBRARIES =
/usr/lib64/libSM.so;/usr/lib64/libICE.so;/usr/lib64/libX11.so;/usr/lib64/libXext.so
-- CMAKE_GENERATOR = Unix Makefiles
-- The CXX compiler identification is GNU
-- Check for working CXX compiler: /usr/bin/c++
-- Check for working CXX compiler: /usr/bin/c++ -- works
-- Detecting CXX compiler ABI info
-- Detecting CXX compiler ABI info - done
-- Configuring done
-- Generating done
-- Build files have been written to:
/opt/test/plplot-5.9.5/build_dir/language_tests/CXX
-- The CXX compiler identification is GNU
-- Check for working CXX compiler: /usr/bin/c++
-- Check for working CXX compiler: /usr/bin/c++ -- works
-- Detecting CXX compiler ABI info
-- Detecting CXX compiler ABI info - done
-- Check for using namespace support
-- Check for using namespace - found
-- Looking for C++ include cmath
-- Looking for C++ include cmath - found
-- Check for broken isnan support in <cmath>
-- Check for isnan in <cmath> - found
-- Check for using stdint.h with CXX compiler
-- Check for using stdint.h with CXX compiler - ok
-- CMAKE_GENERATOR = Unix Makefiles
-- The Fortran compiler identification is GNU
-- Check for working Fortran compiler: /usr/bin/f95
-- Check for working Fortran compiler: /usr/bin/f95 -- works
-- Checking whether /usr/bin/f95 supports Fortran 90
-- Checking whether /usr/bin/f95 supports Fortran 90 -- yes
-- Configuring done
-- Generating done
-- Build files have been written to:
/opt/test/plplot-5.9.5/build_dir/language_tests/Fortran
-- The Fortran compiler identification is GNU
-- Check for working Fortran compiler: /usr/bin/f95
-- Check for working Fortran compiler: /usr/bin/f95 -- works
-- Checking whether /usr/bin/f95 supports Fortran 90
-- Checking whether /usr/bin/f95 supports Fortran 90 -- yes
-- Check for f77 command line support
-- Check for f77 command line support - found
-- Check if isnan function is available in fortran
-- Check for isnan in fortran - not found
-- NOTICE: Found: /usr/bin/f95
-- CMAKE_GENERATOR = Unix Makefiles
-- Configuring done
-- Generating done
-- Build files have been written to:
/opt/test/plplot-5.9.5/build_dir/language_tests/Java
-- Found PythonInterp: /usr/bin/python2.4
-- Found PythonLibs: /usr/lib64/python2.4/config/libpython2.4.a
Traceback (most recent call last):
File "<string>", line 1, in ?
ImportError: No module named numpy
-- WARNING: octave not found. Disabling octave bindings
-- Looking for include paths and libraries for Tcl/Tk
-- Looking for include paths and libraries for Tcl/Tk - not found
-- WARNING: Disabling everything that is Tcl/Tk related
-- WARNING: perl PDL module not found. Disabling Perl/PDL examples
-- CMAKE_GENERATOR = Unix Makefiles
-- Check for working Ada builder: GNAT_EXECUTABLE_BUILDER-NOTFOUND
-- Check for working Ada builder: GNAT_EXECUTABLE_BUILDER-NOTFOUND -- broken
CMake Error at
/opt/test/plplot-5.9.5/cmake/modules/CMakeTestAdaCompiler.cmake:48 (MESSAGE):
The Ada builder "GNAT_EXECUTABLE_BUILDER-NOTFOUND" is not able to compile,
bind, and link a simple test program.
It fails with the following output:
Change Dir:
/opt/test/plplot-5.9.5/build_dir/language_tests/Ada/CMakeFiles/CMakeTmp
Run Build Command:/usr/bin/gmake
/usr/bin/cmake
-H/opt/test/plplot-5.9.5/build_dir/language_tests/Ada/CMakeFiles/CMakeTmp
-B/opt/test/plplot-5.9.5/build_dir/language_tests/Ada/CMakeFiles/CMakeTmp
--check-build-system CMakeFiles/Makefile.cmake 0
/usr/bin/cmake -E cmake_progress_start
/opt/test/plplot-5.9.5/build_dir/language_tests/Ada/CMakeFiles/CMakeTmp/CMakeFiles
/opt/test/plplot-5.9.5/build_dir/language_tests/Ada/CMakeFiles/CMakeTmp/CMakeFiles/progress.make
/usr/bin/gmake -f CMakeFiles/Makefile2 all
gmake[1]: Entering directory
`/opt/test/plplot-5.9.5/build_dir/language_tests/Ada/CMakeFiles/CMakeTmp'
/usr/bin/gmake -f CMakeFiles/testadacompiler.dir/build.make
CMakeFiles/testadacompiler.dir/depend
gmake[2]: Entering directory
`/opt/test/plplot-5.9.5/build_dir/language_tests/Ada/CMakeFiles/CMakeTmp'
cd /opt/test/plplot-5.9.5/build_dir/language_tests/Ada/CMakeFiles/CMakeTmp
&& /usr/bin/cmake -E cmake_depends "Unix Makefiles"
/opt/test/plplot-5.9.5/build_dir/language_tests/Ada/CMakeFiles/CMakeTmp
/opt/test/plplot-5.9.5/build_dir/language_tests/Ada/CMakeFiles/CMakeTmp
/opt/test/plplot-5.9.5/build_dir/language_tests/Ada/CMakeFiles/CMakeTmp
/opt/test/plplot-5.9.5/build_dir/language_tests/Ada/CMakeFiles/CMakeTmp
/opt/test/plplot-5.9.5/build_dir/language_tests/Ada/CMakeFiles/CMakeTmp/CMakeFiles/testadacompiler.dir/DependInfo.cmake
--color=
Scanning dependencies of target testadacompiler
gmake[2]: Leaving directory
`/opt/test/plplot-5.9.5/build_dir/language_tests/Ada/CMakeFiles/CMakeTmp'
/usr/bin/gmake -f CMakeFiles/testadacompiler.dir/build.make
CMakeFiles/testadacompiler.dir/build
gmake[2]: Entering directory
`/opt/test/plplot-5.9.5/build_dir/language_tests/Ada/CMakeFiles/CMakeTmp'
/usr/bin/cmake -E cmake_progress_report
/opt/test/plplot-5.9.5/build_dir/language_tests/Ada/CMakeFiles/CMakeTmp/CMakeFiles
1
[100%] Building Ada object CMakeFiles/testadacompiler.dir/testadacompiler.o
/usr/bin/gcc -c
/opt/test/plplot-5.9.5/build_dir/language_tests/Ada/CMakeFiles/CMakeTmp/testadacompiler.adb
-o CMakeFiles/testadacompiler.dir/testadacompiler.o
gcc: error trying to exec 'gnat1': execvp: No such file or directory
gmake[2]: *** [CMakeFiles/testadacompiler.dir/testadacompiler.o] Error 1
gmake[2]: Leaving directory
`/opt/test/plplot-5.9.5/build_dir/language_tests/Ada/CMakeFiles/CMakeTmp'
gmake[1]: *** [CMakeFiles/testadacompiler.dir/all] Error 2
gmake[1]: Leaving directory
`/opt/test/plplot-5.9.5/build_dir/language_tests/Ada/CMakeFiles/CMakeTmp'
gmake: *** [all] Error 2
CMake will not be able to correctly generate this project.
Call Stack (most recent call first):
CMakeLists.txt:7 (enable_language)
-- Configuring incomplete, errors occurred!
-- WARNING: no working Ada compiler so disabling Ada bindings and examples.
-- WARNING: ocamlbuild not found. Disabling ocaml bindings
-- WARNING: swig version too old for Lua bindings. Disabling Lua bindings.
-- CMAKE_GENERATOR = Unix Makefiles
-- D Compiler Install Prefix (use D_PATH env var to override): CMAKE_D_COMPILER-
CMake Error: your D compiler: "CMAKE_D_COMPILER-NOTFOUND" was not found.
Please set CMAKE_D_COMPILER to a valid compiler path or name.
-- Configuring incomplete, errors occurred!
-- WARNING: no working D compiler so disabling D bindings and examples.
-- FREETYPE_INCLUDE_DIR = /usr/include/freetype2
-- FREETYPE_LIBRARIES = /usr/lib64/libfreetype.so
Fonts not found - disabling freetype
-- Check for NaN awareness in C compiler
-- Check for NaN awareness in C compiler - found
-- FindQHull: Found both qhull_a.h and libqhull.a
-- Looking for qh_new_qhull
-- Looking for qh_new_qhull - found
-- QHULL_INCLUDE_DIRS = /usr/include
-- QHULL_LIBRARIES = /usr/lib64/libqhull.so
-- checking for module 'pango'
-- found pango, version 1.14.9
-- checking for module 'pangoft2'
-- found pangoft2, version 1.14.9
-- Looking for dlopen in dl
-- Looking for dlopen in dl - found
-- Found LTDL: /usr/lib64/libltdl.so;/usr/lib64/libdl.so
-- LTDL_INCLUDE_DIR = /usr/include
-- LTDL_LIBRARY_DIR = /usr/lib64
-- LTDL_LIBRARIES = /usr/lib64/libltdl.so;/usr/lib64/libdl.so
-- checking for module 'pangocairo'
-- found pangocairo, version 1.14.9
Pango Cairo version (1.14.9) < 1.20.5, if text rendering is slow recommend
turning off text clipping
-- Looking for include files CMAKE_HAVE_PTHREAD_H
-- Looking for include files CMAKE_HAVE_PTHREAD_H - found
-- Looking for pthread_create in pthreads
-- Looking for pthread_create in pthreads - not found
-- Looking for pthread_create in pthread
-- Looking for pthread_create in pthread - found
-- Found Threads: TRUE
-- WARNING: ENABLE_tk OFF. Setting PLD_tk, PLD_ntk, and PLD_tkwin OFF.
-- checking for modules 'lasi;pango;pangoft2'
-- package 'lasi' not found
includedir =
libdir =
linkflags =
cflags =
-- WARNING: pango, pangoft2, or lasi not found with pkg-config.
Setting PLD_psttf to OFF. Please install all of these packages
and/or set the environment variable PKG_CONFIG_PATH appropriately.
-- WARNING: Qt4 development environment not found so disabling all qt devices.
-- WARNING: PLD_extqt is OFF so setting ENABLE_qt to OFF.
-- WARNING: ENABLE_qt is OFF so setting ENABLE_pyqt4 to OFF.
-- WARNING: wxWidgets not found so setting all wxwidgets devices to OFF.
-- WARNING: PLD_wxwidgets is OFF so setting ENABLE_wxwidgets to OFF.
-- validate target will be available to check for syntax errors in the PLplot
DocBook documentation using /usr/bin/onsgmls.
Summary of CMake build system results for PLplot
Install location variables which can be set by the user:
CMAKE_INSTALL_PREFIX: /usr/local
CMAKE_INSTALL_EXEC_PREFIX /usr/local
CMAKE_INSTALL_BINDIR /usr/local/bin
CMAKE_INSTALL_DATADIR /usr/local/share
CMAKE_INSTALL_LIBDIR /usr/local/lib
CMAKE_INSTALL_INCLUDEDIR /usr/local/include
CMAKE_INSTALL_INFODIR /usr/local/share/info
CMAKE_INSTALL_MANDIR /usr/local/share/man
Derived install location variables:
DATA_DIR /usr/local/share/plplot5.9.5
LIB_DIR /usr/local/lib
INCLUDE_DIR /usr/local/include/plplot
BIN_DIR /usr/local/bin
TCL_DIR /usr/local/share/plplot5.9.5/tcl
ADA_INCLUDE_DIR /usr/local/share/ada/adainclude/plplotadad
ADA_LIB_DIR /usr/local/lib/ada/adalib/plplotadad
PYTHON_INSTDIR /usr/local/lib64/python2.4/site-packages
DRV_DIR /usr/local/lib/plplot5.9.5/driversd
DOC_DIR /usr/local/share/doc/plplot
MAN_DIR /usr/local/share/man
INFO_DIR /usr/local/share/info
Other important CMake variables:
CMAKE_SYSTEM_NAME: Linux
UNIX: 1
WIN32:
APPLE:
MSVC: (MSVC_VERSION: )
MINGW:
MSYS:
CYGWIN:
BORLAND:
WATCOM:
SWIG_FOUND: 1
PERL_FOUND: TRUE
X11_FOUND: 1
CMAKE_BUILD_TYPE:
CMAKE_C_COMPILER CMAKE_C_FLAGS: /usr/bin/gcc
CMAKE_CXX_COMPILER CMAKE_CXX_FLAGS: /usr/bin/c++
CMAKE_Fortran_COMPILER CMAKE_Fortran_FLAGS: /usr/bin/f95
Target Fortran:
PYTHON_EXECUTABLE: /usr/bin/python2.4
PYTHON_INCLUDE_PATH:
/usr/include/python2.4;/usr/include/python2.4/Numeric
PYTHON_LIBRARIES:
/usr/lib64/python2.4/config/libpython2.4.a
LIB_TAG: d
ENABLE_DYNDRIVERS: ON
DRIVERS_LIST: cairo;mem;null;ps;svg;xfig;xwin
DEVICES_LIST:
extcairo;pdfcairo;pngcairo;pscairo;svgcairo;xcairo;mem;null;ps;svg;xfig;xwin
Library options:
BUILD_SHARED_LIBS: ON PL_DOUBLE: ON
Optional libraries:
HAVE_QHULL: ON WITH_CSA: ON
HAVE_FREETYPE: HAVE_PTHREAD: ON
HAVE_AGG:
Language Bindings:
ENABLE_f77: ON ENABLE_f95: ON
ENABLE_cxx: ON ENABLE_java: ON
ENABLE_python: ON ENABLE_octave: OFF
ENABLE_tcl: OFF ENABLE_itcl: OFF
ENABLE_tk: OFF ENABLE_itk: OFF
ENABLE_pdl: OFF ENABLE_wxwidgets: OFF
ENABLE_gnome2: OFF ENABLE_pygcw: OFF
ENABLE_ada: OFF ENABLE_d: OFF
ENABLE_ocaml: OFF ENABLE_lua: OFF
ENABLE_qt: OFF ENABLE_pyqt4: OFF
-- Configuring done
-- Generating done
-- Build files have been written to: /opt/test/plplot-5.9.5/build_dir
