On 12/06/2011 01:43 PM, JR van Rensburg wrote:
On Tue, 2011-12-06 at 13:23 -0800, Todd And Margo Chester wrote:
On Tue, 2011-12-06 at 12:40 -0800, Todd And Margo Chester wrote:
Hi All,
For some reason, I am unable to cut a DVD from an ISO.
Specifically, I am trying to cut DVDs of the SL61 DVD.
I get bad md5sums when using from both growisofs and k3b.
You specifically state here that there is a problem with the checksum.
If you are sure the chesksum is OK then the image is not corrupt.
The image(s) are good. And, it does not matter if my iso is good
or not, after I burn, both the iso and the disk should match. If
one is bad, both will be the "same" bad.
k3b won't check the md5sum for me. k3b crashes when checking with an
error about a bad device. I used the md5sum command from the command
line to test the new disks.
OK, so the iso is sound.
k3b should be able to check the disc integrity (haven't used it for a
while, but it uses either md5 or checksum.
You say that the error given by k3b is a device error?
if you are using rewritable discs, just try writing any data to the disc
and see if it works.
If you are still getting errors, you do have a device error.
Check the dmesg data to see/get a clue what the problem is. Try:
dmesg>tail
Not the error in dmesg. I am using DVD+R, 16x
