Dear all, I have a dell vostro 1550 notebook having scientific linux cern 5.5 installed on it. After the installation it has not detected the wireless card , sound card , webcam driver and graphics driver. Below are the outputs of some commands for ur reference..
[root@localhost ~]# lspci 00:00.0 Host bridge: Intel Corporation Unknown device 0104 (rev 09) 00:02.0 VGA compatible controller: Intel Corporation Unknown device 0116 (rev 09) 00:16.0 Communication controller: Intel Corporation Cougar Point HECI Controller #1 (rev 04) 00:1a.0 USB Controller: Intel Corporation Cougar Point USB Enhanced Host Controller #2 (rev 05) 00:1b.0 Audio device: Intel Corporation Cougar Point High Definition Audio Controller (rev 05) 00:1c.0 PCI bridge: Intel Corporation Cougar Point PCI Express Root Port 1 (rev b5) 00:1c.1 PCI bridge: Intel Corporation Cougar Point PCI Express Root Port 2 (rev b5) 00:1c.3 PCI bridge: Intel Corporation Cougar Point PCI Express Root Port 4 (rev b5) 00:1c.7 PCI bridge: Intel Corporation Cougar Point PCI Express Root Port 8 (rev b5) 00:1d.0 USB Controller: Intel Corporation Cougar Point USB Enhanced Host Controller #1 (rev 05) 00:1f.0 ISA bridge: Intel Corporation Unknown device 1c4b (rev 05) 00:1f.2 SATA controller: Intel Corporation Cougar Point 6 port SATA AHCI Controller (rev 05) 00:1f.3 SMBus: Intel Corporation Cougar Point SMBus Controller (rev 05) 05:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168B PCI Express Gigabit Ethernet controller (rev 06) 09:00.0 Network controller: Broadcom Corporation Unknown device 4727 (rev 01) [root@localhost ~]# dmesg Linux version 2.6.18-194.el5xen ([email protected]) (gcc version 4.1.2 20080704 (Red Hat 4.1.2-46)) #1 SMP Wed Mar 31 12:52:05 CEST 2010 BIOS-provided physical RAM map: Xen: 0000000000000000 - 00000000dffac000 (usable) 2855MB HIGHMEM available. 727MB LOWMEM available. NX (Execute Disable) protection: active On node 0 totalpages: 917420 DMA zone: 186366 pages, LIFO batch:31 HighMem zone: 731054 pages, LIFO batch:31 found SMP MP-table at 000fd1b0 DMI 2.6 present. ACPI: RSDP (v002 DELL ) @ 0x000f0410 ACPI: XSDT (v001 DELL WN09 0x01072009 AMI 0x00010013) @ 0xdafe8070 ACPI: FADT (v004 DELL WN09 0x01072009 AMI 0x00010013) @ 0xdaff1bd0 ACPI: MADT (v003 DELL WN09 0x01072009 AMI 0x00010013) @ 0xdaff1cc8 ACPI: MCFG (v001 DELL WN09 0x01072009 MSFT 0x00000097) @ 0xdaff1d40 ACPI: SSDT (v001 TrmRef PtidDevc 0x00001000 INTL 0x20091112) @ 0xdaff1d80 ACPI: HPET (v001 DELL WN09 0x01072009 AMI. 0x00000004) @ 0xdaff2230 ACPI: SSDT (v001 PmRef Cpu0Ist 0x00003000 INTL 0x20051117) @ 0xdaff2268 ACPI: SSDT (v001 PmRef CpuPm 0x00003000 INTL 0x20051117) @ 0xdaff2b78 ACPI: OSFR (v001 DELL M08 0x07db0810 ASL 0x00000061) @ 0xdaff3510 ACPI: DSDT (v002 DELL WN09 0x00000000 INTL 0x20051117) @ 0x00000000 ACPI: Local APIC address 0xfee00000 ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled) ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled) ACPI: LAPIC (acpi_id[0x03] lapic_id[0x01] enabled) ACPI: LAPIC (acpi_id[0x04] lapic_id[0x03] enabled) ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1]) ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0]) IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23 ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) ACPI: IRQ0 used by override. ACPI: IRQ2 used by override. ACPI: IRQ9 used by override. Enabling APIC mode: Flat. Using 1 I/O APICs Using ACPI (MADT) for SMP configuration information Built 1 zonelists. Total pages: 917420 Kernel command line: ro root=/dev/VolGroup00/LogVol00 rhgb quiet Enabling fast FPU save and restore... done. Enabling unmasked SIMD FPU exception support... done. Initializing CPU#0 CPU 0 irqstacks, hard=c0758000 soft=c0738000 PID hash table entries: 4096 (order: 12, 16384 bytes) Xen reported: 2195.088 MHz processor. Console: colour VGA+ 80x25 Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) Software IO TLB enabled: Aperture: 64 megabytes Kernel range: 0x00000000c323b000 - 0x00000000c723b000 vmalloc area: ee000000-f4ffe000, maxmem 2d7fe000 Memory: 3548324k/3669680k available (2184k kernel code, 112080k reserved, 897k data, 176k init, 2924216k highmem) Checking if this processor honours the WP bit even in supervisor mode... Ok. Calibrating delay using timer specific routine.. 5489.44 BogoMIPS (lpj=10978889) Security Framework v1.0.0 initialized SELinux: Initializing. SELinux: Starting in permissive mode selinux_register_security: Registering secondary module capability Capability LSM initialized as secondary Mount-cache hash table entries: 512 CPU: After generic identify, caps: 1fc99371 00100000 00000000 02000000 11ba0283 00000000 00000000 CPU: After vendor identify, caps: 1fc99371 00100000 00000000 02000000 11ba0283 00000000 00000000 CPU: L1 I cache: 32K, L1 D cache: 32K CPU: L2 cache: 256K CPU: L3 cache: 3072K CPU: After all inits, caps: 1fc99371 00100000 00000000 03000140 11ba0283 00000000 00000000 Checking 'hlt' instruction... OK. SMP alternatives: switching to UP code ACPI: Core revision 20060707 CPU 1 irqstacks, hard=c0759000 soft=c0739000 CPU 2 irqstacks, hard=c075a000 soft=c073a000 CPU 3 irqstacks, hard=c075b000 soft=c073b000 ENABLING IO-APIC IRQs SMP alternatives: switching to SMP code Initializing CPU#1 Initializing CPU#2 Brought up 4 CPUs sizeof(vma)=88 bytes Initializing CPU#3 sizeof(page)=32 bytes sizeof(inode)=340 bytes sizeof(dentry)=136 bytes sizeof(ext3inode)=492 bytes sizeof(buffer_head)=52 bytes sizeof(skbuff)=176 bytes migration_cost=356 checking if image is initramfs... it is Freeing initrd memory: 7338k freed Grant table initialized NET: Registered protocol family 16 ACPI: bus type pci registered PCI: Not using MMCONFIG. PCI: Using configuration type 1 Setting up standard PCI resources Allocating PCI resources starting at e0000000 (gap: dfa00000:18600000) ACPI: Interpreter enabled ACPI: Using IOAPIC for interrupt routing ACPI: No dock devices found. ACPI: PCI Root Bridge [PCI0] (0000:00) ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP01._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP02._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP04._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP08._PRT] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 10 *11 12 14 15) ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 *5 6 10 11 12 14 15) ACPI: PCI Interrupt Link [LNKC] (IRQs *3 4 5 6 10 11 12 14 15) ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 *10 11 12 14 15) ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled. ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled. ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 *5 6 10 11 12 14 15) ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 *5 6 10 11 12 14 15) Linux Plug and Play Support v0.97 (c) Adam Belay pnp: PnP ACPI init pnp: PnP ACPI: found 13 devices xen_mem: Initialising balloon driver. usbcore: registered new driver usbfs usbcore: registered new driver hub PCI: Using ACPI for IRQ routing PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report NetLabel: Initializing NetLabel: domain hash size = 128 NetLabel: protocols = UNLABELED CIPSOv4 NetLabel: unlabeled traffic allowed by default pnp: 00:06: ioport range 0x454-0x457 has been reserved PCI: Bridge: 0000:00:1c.0 IO window: disabled. MEM window: disabled. PREFETCH window: disabled. PCI: Bridge: 0000:00:1c.1 IO window: e000-0000 MEM window: disabled. PREFETCH window 0x00000000f1100000-0x00000000f11fffff PCI: Bridge: 0000:00:1c.3 IO window: disabled. MEM window: f7d00000-00000000 PREFETCH window: disabled. PCI: Bridge: 0000:00:1c.7 IO window: c000-0000 MEM window: f6c00000-00000000 PREFETCH window 0x00000000f0000000-0x00000000f10fffff ACPI: PCI Interrupt 0000:00:1c.0[A] -> GSI 16 (level, low) -> IRQ 16 PCI: Setting latency timer of device 0000:00:1c.0 to 64 ACPI: PCI Interrupt 0000:00:1c.1[B] -> GSI 17 (level, low) -> IRQ 17 PCI: Setting latency timer of device 0000:00:1c.1 to 64 ACPI: PCI Interrupt 0000:00:1c.3[D] -> GSI 19 (level, low) -> IRQ 18 PCI: Setting latency timer of device 0000:00:1c.3 to 64 ACPI: PCI Interrupt 0000:00:1c.7[D] -> GSI 19 (level, low) -> IRQ 18 PCI: Setting latency timer of device 0000:00:1c.7 to 64 NET: Registered protocol family 2 IP route cache hash table entries: 32768 (order: 5, 131072 bytes) TCP established hash table entries: 131072 (order: 8, 1048576 bytes) TCP bind hash table entries: 65536 (order: 7, 524288 bytes) TCP: Hash tables configured (established 131072 bind 65536) TCP reno registered audit: initializing netlink socket (disabled) type=2000 audit(1325694130.344:1): initialized highmem bounce pool size: 64 pages VFS: Disk quotas dquot_6.5.1 Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) SELinux: Registering netfilter hooks Initializing Cryptographic API alg: No test for crc32c (crc32c-generic) ksign: Installing public key data Loading keyring - Added public key A09CAC43B29C8487 - User ID: Red Hat, Inc. (Kernel Module GPG key) io scheduler noop registered io scheduler anticipatory registered io scheduler deadline registered io scheduler cfq registered (default) Boot video device is 0000:00:02.0 PCI: Setting latency timer of device 0000:00:1c.0 to 64 PCI: Setting latency timer of device 0000:00:1c.1 to 64 PCI: Setting latency timer of device 0000:00:1c.3 to 64 PCI: Setting latency timer of device 0000:00:1c.7 to 64 pci_hotplug: PCI Hot Plug PCI Core version: 0.5 ACPI (exconfig-0456): Dynamic SSDT Load - OemId [ PmRef] OemTableId [ Cpu0Cst] [20060707] ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3]) ACPI (exconfig-0456): Dynamic SSDT Load - OemId [ PmRef] OemTableId [ ApIst] [20060707] ACPI (exconfig-0456): Dynamic SSDT Load - OemId [ PmRef] OemTableId [ ApCst] [20060707] ACPI: CPU1 (power states: C1[C1] C2[C2] C3[C3]) ACPI: CPU2 (power states: C1[C1] C2[C2] C3[C3]) ACPI: CPU3 (power states: C1[C1] C2[C2] C3[C3]) ACPI: Thermal Zone [THM] (49 C) Real Time Clock Driver v1.12ac hpet_acpi_add: no address or irqs in _CRS Non-volatile memory driver v1.2 Linux agpgart interface v0.101 (c) Dave Jones brd: module loaded Xen virtual console successfully installed as ttyS0 Event-channel device installed. Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2 ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx Probing IDE interface ide0... Probing IDE interface ide1... ide-floppy driver 0.99.newide usbcore: registered new driver hiddev usbcore: registered new driver usbhid drivers/usb/input/hid-core.c: v2.6:USB HID core driver PNP: PS/2 Controller [PNP0303:KBC,PNP0f13:PS2] at 0x60,0x64 irq 1,12 serio: i8042 KBD port at 0x60,0x64 irq 1 serio: i8042 AUX port at 0x60,0x64 irq 12 mice: PS/2 mouse device common for all mice md: md driver 0.90.3 MAX_MD_DEVS=256, MD_SB_DISKS=27 md: bitmap version 4.39 TCP bic registered Initializing IPsec netlink socket NET: Registered protocol family 1 NET: Registered protocol family 17 Using IPI No-Shortcut mode Initalizing network drop monitor service Freeing unused kernel memory: 176k freed Write protecting the kernel read-only data: 394k input: AT Translated Set 2 keyboard as /class/input/input0 ACPI: PCI Interrupt 0000:00:1a.0[A] -> GSI 16 (level, low) -> IRQ 16 PCI: Setting latency timer of device 0000:00:1a.0 to 64 ehci_hcd 0000:00:1a.0: EHCI Host Controller ehci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 1 ehci_hcd 0000:00:1a.0: debug port 2 PCI: cache line size of 32 is not supported by device 0000:00:1a.0 ehci_hcd 0000:00:1a.0: irq 16, io mem 0xf7e08000 ehci_hcd 0000:00:1a.0: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004 usb usb1: configuration #1 chosen from 1 choice hub 1-0:1.0: USB hub found hub 1-0:1.0: 2 ports detected ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 23 (level, low) -> IRQ 19 PCI: Setting latency timer of device 0000:00:1d.0 to 64 ehci_hcd 0000:00:1d.0: EHCI Host Controller ehci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2 ehci_hcd 0000:00:1d.0: debug port 2 PCI: cache line size of 32 is not supported by device 0000:00:1d.0 ehci_hcd 0000:00:1d.0: irq 19, io mem 0xf7e07000 ehci_hcd 0000:00:1d.0: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004 usb usb2: configuration #1 chosen from 1 choice hub 2-0:1.0: USB hub found hub 2-0:1.0: 2 ports detected ohci_hcd: 2005 April 22 USB 1.1 'Open' Host Controller (OHCI) Driver (PCI) USB Universal Host Controller Interface driver v3.0 SCSI subsystem initialized usb 1-1: new high speed USB device using ehci_hcd and address 2 libata version 3.00 loaded. ahci 0000:00:1f.2: version 3.0 ACPI: PCI Interrupt 0000:00:1f.2[B] -> GSI 19 (level, low) -> IRQ 18 input: PS/2 Generic Mouse as /class/input/input1 usb 1-1: configuration #1 chosen from 1 choice hub 1-1:1.0: USB hub found hub 1-1:1.0: 6 ports detected usb 2-1: new high speed USB device using ehci_hcd and address 2 usb 2-1: configuration #1 chosen from 1 choice hub 2-1:1.0: USB hub found hub 2-1:1.0: 8 ports detected usb 1-1.1: new low speed USB device using ehci_hcd and address 3 usb 1-1.1: configuration #1 chosen from 1 choice input: USB Optical Mouse as /class/input/input2 input: USB HID v1.11 Mouse [USB Optical Mouse] on usb-0000:00:1a.0-1.1 ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 6 Gbps 0x11 impl SATA mode ahci 0000:00:1f.2: flags: 64bit ncq sntf stag pm led clo pio slum part ems PCI: Setting latency timer of device 0000:00:1f.2 to 64 scsi0 : ahci scsi1 : ahci scsi2 : ahci scsi3 : ahci scsi4 : ahci scsi5 : ahci ata1: SATA max UDMA/133 abar m2048@0xf7e06000 port 0xf7e06100 irq 251 ata2: DUMMY ata3: DUMMY ata4: DUMMY ata5: SATA max UDMA/133 abar m2048@0xf7e06000 port 0xf7e06300 irq 251 ata6: DUMMY usb 1-1.4: new full speed USB device using ehci_hcd and address 4 usb 1-1.4: configuration #1 chosen from 1 choice ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) ata1.00: ACPI cmd 00/00:00:00:00:00:a0 rejected by device (Stat=0x51 Err=0x04) ata1.00: ATA-8: WDC WD5000BPVT-75HXZT3, 03.01A03, max UDMA/133 ata1.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 31/32) ata1.00: ACPI cmd 00/00:00:00:00:00:a0 rejected by device (Stat=0x51 Err=0x04) ata1.00: configured for UDMA/133 usb 1-1.5: new high speed USB device using ehci_hcd and address 5 usb 1-1.5: configuration #1 chosen from 1 choice ata5: SATA link up 1.5 Gbps (SStatus 113 SControl 300) ata5.00: ACPI _SDD failed (AE 0x5) ata5: failed to recover some devices, retrying in 5 secs ata5: SATA link up 1.5 Gbps (SStatus 113 SControl 300) ata5.00: ACPI _SDD failed (AE 0x5) ata5.00: ACPI: failed the second time, disabled ata5.00: configured for UDMA/100 Vendor: ATA Model: WDC WD5000BPVT-7 Rev: 03.0 Type: Direct-Access ANSI SCSI revision: 05 SCSI device sda: 976773168 512-byte hdwr sectors (500108 MB) sda: Write Protect is off sda: Mode Sense: 00 3a 00 00 SCSI device sda: drive cache: write back SCSI device sda: 976773168 512-byte hdwr sectors (500108 MB) sda: Write Protect is off sda: Mode Sense: 00 3a 00 00 SCSI device sda: drive cache: write back sda: sda1 sda2 sda3 sda4 < sda5 > sd 0:0:0:0: Attached scsi disk sda Vendor: TSSTcorp Model: DVD+-RW SN-208BB Rev: D100 Type: CD-ROM ANSI SCSI revision: 05 Initializing USB Mass Storage driver... usbcore: registered new driver usb-storage USB Mass Storage support registered. device-mapper: uevent: version 1.0.3 device-mapper: ioctl: 4.11.5-ioctl (2007-12-12) initialised: [email protected] device-mapper: dm-raid45: initialized v0.2594l kjournald starting. Commit interval 5 seconds EXT3-fs: mounted filesystem with ordered data mode. type=1404 audit(1325694168.710:2): enforcing=1 old_enforcing=0 auid=4294967295 ses=4294967295 security: 3 users, 6 roles, 1951 types, 257 bools, 1 sens, 1024 cats security: 61 classes, 77097 rules SELinux: Completing initialization. SELinux: Setting up existing superblocks. SELinux: initialized (dev dm-0, type ext3), uses xattr SELinux: initialized (dev usbfs, type usbfs), uses genfs_contexts SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs SELinux: initialized (dev debugfs, type debugfs), uses genfs_contexts SELinux: initialized (dev selinuxfs, type selinuxfs), uses genfs_contexts SELinux: initialized (dev mqueue, type mqueue), uses transition SIDs SELinux: initialized (dev devpts, type devpts), uses transition SIDs SELinux: initialized (dev eventpollfs, type eventpollfs), uses task SIDs SELinux: initialized (dev inotifyfs, type inotifyfs), uses genfs_contexts SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs SELinux: initialized (dev futexfs, type futexfs), uses genfs_contexts SELinux: initialized (dev anon_inodefs, type anon_inodefs), uses genfs_contexts SELinux: initialized (dev pipefs, type pipefs), uses task SIDs SELinux: initialized (dev sockfs, type sockfs), uses task SIDs SELinux: initialized (dev cpuset, type cpuset), uses genfs_contexts SELinux: initialized (dev proc, type proc), uses genfs_contexts SELinux: initialized (dev bdev, type bdev), uses genfs_contexts SELinux: initialized (dev rootfs, type rootfs), uses genfs_contexts SELinux: initialized (dev sysfs, type sysfs), uses genfs_contexts type=1403 audit(1325694169.254:3): policy loaded auid=4294967295 ses=4294967295 Linux video capture interface: v2.00 uvcvideo: Found UVC 1.00 device Integrated Webcam (0bda:58c1) input: Integrated Webcam as /class/input/input3 usbcore: registered new driver uvcvideo USB Video Class driver (v0.1.0) Bluetooth: Core ver 2.10 NET: Registered protocol family 31 Bluetooth: HCI device and connection manager initialized Bluetooth: HCI socket layer initialized Bluetooth: HCI USB driver ver 2.9 usbcore: registered new driver hci_usb r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded ACPI: PCI Interrupt 0000:05:00.0[A] -> GSI 17 (level, low) -> IRQ 17 PCI: Setting latency timer of device 0000:05:00.0 to 64 r8169 0000:05:00.0: unknown MAC, using family default eth0: RTL8168b/8111b at 0xee15e000, 18:03:73:98:29:33, XID 0c200000 IRQ 250 sd 0:0:0:0: Attached scsi generic sg0 type 0 scsi 4:0:0:0: Attached scsi generic sg1 type 5 input: PC Speaker as /class/input/input4 sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray Uniform CD-ROM driver Revision: 3.20 sr 4:0:0:0: Attached scsi CD-ROM sr0 floppy0: no floppy controllers found lp: driver loaded but no devices found SELinux: initialized (dev ramfs, type ramfs), uses genfs_contexts NET: Registered protocol family 10 lo: Disabled Privacy Extensions IPv6 over IPv4 tunneling driver ACPI: AC Adapter [AC] (on-line) ACPI: Battery Slot [BAT0] (battery present) ACPI: Power Button (FF) [PWRF] ACPI: Lid Switch [LID0] ACPI: Power Button (CM) [PWRB] ACPI: Sleep Button (CM) [SBTN] ACPI: Mapper loaded input: Dell WMI hotkeys as /class/input/input5 input: Video Bus as /class/input/input6 ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no) md: Autodetecting RAID arrays. md: autorun ... md: ... autorun DONE. device-mapper: multipath: version 1.0.5 loaded loop: loaded (max 8 devices) EXT3 FS on dm-0, internal journal kjournald starting. Commit interval 5 seconds EXT3 FS on sda3, internal journal EXT3-fs: mounted filesystem with ordered data mode. SELinux: initialized (dev sda3, type ext3), uses xattr SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs Adding 5603320k swap on /dev/VolGroup00/LogVol01. Priority:-1 extents:1 across:5603320k SELinux: initialized (dev binfmt_misc, type binfmt_misc), uses genfs_contexts IA-32 Microcode Update Driver: v1.14-xen <[email protected]> Loading iSCSI transport class v2.0-871. 802.1Q VLAN Support v1.8 Ben Greear <[email protected]> All bugs added by David S. Miller <[email protected]> cxgb3i: tag itt 0x1fff, 13 bits, age 0xf, 4 bits. iscsi: registered transport (cxgb3i) Broadcom NetXtreme II CNIC Driver cnic v2.1.0 (Oct 10, 2009) Broadcom NetXtreme II iSCSI Driver bnx2i v2.1.0 (Dec 06, 2009) iscsi: registered transport (bnx2i) iscsi: registered transport (tcp) iscsi: registered transport (iser) iscsi: registered transport (be2iscsi) ip6_tables: (C) 2000-2006 Netfilter Core Team ip_tables: (C) 2000-2006 Netfilter Core Team Netfilter messages via NETLINK v0.30. ip_conntrack version 2.4 (8192 buckets, 65536 max) - 228 bytes per conntrack r8169: eth0: link down ADDRCONF(NETDEV_UP): eth0: link is not ready SELinux: initialized (dev rpc_pipefs, type rpc_pipefs), uses genfs_contexts device-mapper: dm-log-clustered: (built Sep 7 2009 09:37:08) installed Bluetooth: L2CAP ver 2.8 Bluetooth: L2CAP socket layer initialized Bluetooth: RFCOMM socket layer initialized Bluetooth: RFCOMM TTY layer initialized Bluetooth: RFCOMM ver 1.8 Bluetooth: HIDP (Human Interface Emulation) ver 1.1 SELinux: initialized (dev autofs, type autofs), uses genfs_contexts SELinux: initialized (dev autofs, type autofs), uses genfs_contexts SELinux: initialized (dev autofs, type autofs), uses genfs_contexts Bridge firewalling registered virbr0: no IPv6 routers present SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs device vif0.0 entered promiscuous mode xenbr0: topology change detected, propagating xenbr0: port 1(vif0.0) entering forwarding state r8169: peth0: link down ADDRCONF(NETDEV_UP): peth0: link is not ready device peth0 entered promiscuous mode eth0: no IPv6 routers present atkbd.c: Unknown key pressed (translated set 2, code 0x88 on isa0060/serio0). atkbd.c: Use 'setkeycodes e008 <keycode>' to make it known. usb 1-1.4: USB disconnect, address 4 Any help is appreciated .. thanks and regards Vivek Chalotra GRID Project Associate, High Energy Physics Group, Department of Physics & Electronics, University of Jammu, Jammu 180006, INDIA.
