The console show "Stage2 loading" or something like that, it never proceeded any further.
I can remove the "rhgb quiet" option next time I try, but I am afraid that some modules are either not included or in the wrong order for this particular hardware/software setup in the RAMDISK image in this particular kernel. On 07/07/2012 03:33 AM, David Sommerseth wrote: > On 07/07/2012 02:09 AM, Zhi-Wei Lu wrote: >> Hi all, >> >> I have a Supermicro box (motherboard X7DW3) with 3ware RAID card (9690SA-4I). >> I have 24 drives attached to this raid card, while the first three drives >> were >> exported as SINGLE (JBOD) drives. The /boot and /root are Linux software raid >> 1 on these first three drives. >> >> The latest kernel-2.6.18-308.8.2.el5.x86_64 would failed to boot, but the >> previous kernel, kernel-2.6.18-308.8.1.el5.x86_64, worked just fine. I also >> tested with CentOS kernel-2.6.18-308.8.2.el5.x86_64 and ended up with the >> same >> fate. Does anyone see this problem at all? >> > > Maybe take a screen shot (with a camera) of the boot process where it stops, > could be an idea? Make sure to remove 'rhgb' and 'quiet' from the kernel > command line (you can edit the grub settings on the fly, if you reach for the > menu). > > > kind regards, > > David Sommerseth >
