Hi Andras,
On 2014-06-17, at 10:25, Andras Horvath <[email protected]> wrote:
> Hi Everyone,
>
> I've got the following server:
>
> DELL Poweredge T110 II
> 01:00.0 RAID bus controller: LSI Logic / Symbios Logic MegaRAID SAS 2008
> [Falcon] (rev 03)
> System is SL 6.5 64 bit with hw raid 1 setup, so array is seen as sda
is that a Dell card?
> I'm having problem with the latest kernel version for some time now. The
> previous kernel version boots fine and everything works just well, but the
> latest kernel (v2.6.32-431.17.1.el6.x86_64) cannot boot and Grub says
> something like "trying to reach blocks outside of partition" and that's all
> the message there is and boot hangs.
If it's really Grub saying this, the kernel hasn't even started. Is /boot a
separate partition? Size and fs? Have you fsck'ed it? Checked free space and
inodes? Tried to reinstall the kernel and the initramfs?
Curious,
Stephan
> All the former kernel versions worked fine. Could there have been a change in
> the modules handling the raid controller?
>
> I've got another issue as well that regards the previous kernel that I'm
> using now (v2.6.32-431.11.2.el6.x86_64) instead of the latest one. The USB
> devices seem to lose connection from time to time (UPS and USB disks). And
> when this happens, they cannot be used anymore. A full reboot is needed
> before I can connect and use an external USB disk for example. Without
> reboot, the device just doesn't show up in /dev. I found error messages in
> the log as below:
>
> kernel: usb 2-1.1: ctrl urb status -75 received
> kernel: usb 2-1: clear tt 1 (8030) error -110
>
>
> Has anyone encountered issues like that? I'd appreciate opinions on how to
> track further down the problem.
>
> Thanks!
>
> Andras
--
Stephan Wiesand
DESY - DV -
Platanenallee 6
15738 Zeuthen, Germany