On 08/11/2015 11:02 AM, Akemi Yagi wrote:
On Tue, Aug 11, 2015 at 10:29 AM, Yasha Karant <[email protected]> wrote:
On 08/11/2015 01:46 AM, Yasha Karant wrote:
I have a colleague for whom I have installed IA-32 SL 6 . She has recently
purchased a HP M225dw "all-in-one" laser printer. However, I cannot find a
driver for this printer for SL 6. HP open systems supported this printer
starting with hplip-3.14.10, but I cannot find this RPM for SL 6. The
current hplip distributed by HP supports the M225dw, but will not install
under SL 6. At present, the printer will not print from SL6 although the
printer is discovered over the LAN. Any help or suggestions greatly would
be appreciated.
Yasha Karant
hplip-3.12.4-6.el6.i686.rpm that is the most recent version I can find
(could not find a more recent one in EPEL, etc., that would work with IA-32
SL6)
HPLIP 3.14.10 is the lowest rev level that supports the HP M225dw
(http://hplipopensource.com/hplip-web/release_notes.html, search on 225dw,
scroll up to find the release number).
Within that site, I see the following page:
http://hplipopensource.com/hplip-web/models/laserjet/hp_laserjet_pro_mfp_m225dw.html
Scroll down and you'll find 'Red Hat Enterprise Linux 6.0 and 7.0'
both showing "Yes". It looks as if the installer works there.
Akemi
Akemi,
That is what I tried at first. It would not install and properly
function, claims not withstanding. I tried yum install (from a
terminal, not the GUI) but it would not work due to a python error (too
old a version, ... ) -- I did not record the error message, and thus
only am relating from memory. When I get to the machine on which I
tried this, I will record the exact errors.
Yasha
