Hello, First, in ifdhandler.h define the following constant: #define TAG_IFD_SIMULTANEOUS_ACCESS 0x0FAF
When GetCapabilities is called return 1 byte which tells the total number of readers supported simultaneously by your driver. Each function in the ifdhandler has a Logical Unit Number (Lun) Part of it is for slots and the other is for readers. The document explains this. Currently, the hotplug loader in Linux cannot distinguish identical readers - so the Lun does not change. In future releases this will be fixed. If you want to test in the meantime - you can add multiple readers to your reader.conf file like this: 0x200000 0x200001 ... Also, I will be adding a Link to the middleware section under Latest Stable PC/SC for patches today - Ludovic has posted a patch for pcsc-lite His modifications include the following: My impovements include: - stop if /tmp/pcsc already exists - clean and remove /tmp/pcsc on exit using signal() and atexit() - renamed SYS_Exit to exit in many places to use the atexit() defined cleaning function - removed \n in debug messages (syslog does not need it) - some minor print cosmetic modification in atrhandler.c - use a define DEBUG_BUFFER_LENGTH instead of 150 in debuglog.c - use snprintf() instead of sprintf() in debuglog.c - add a error on compile in pcscdaemon.c You must use '--enable-syslog' when also using '--enable-daemon' or you will not get any message - renamed SYS_Stat to SYS_Fstat since the system call is fstat and stat is another one - use PCSCLITE_IPC_DIR instead of repeating "/tmp/pcsc/" in pcsclite.h Hope this helps. Dave *************************************************************** Unix Smart Card Developers - M.U.S.C.L.E. (Movement for the Use of Smart Cards in a Linux Environment) http://www.linuxnet.com/ To unsubscribe send an email to [EMAIL PROTECTED] with unsubscribe sclinux ***************************************************************
