Hi, I'm trying to generate a key pair on my CryptoFlex 16k Card, but it doesn't seem to work, I have followed to example in de Cryptoflex 16k Card Programmers' Guide.
I have DF with ID, created with the following APDU: F0 E0 00 01 10 FF FF 03 40 4F 01 38 00 4F 44 FF 01 03 2F 22 FF I have created the EF's to hold the private and public key file with the following EF's: Private: F0 E0 00 01 10 FF FF 01 90 00 12 01 00 F4 FF 44 01 03 F2 FF 22 Public : F0 E0 00 01 10 FF FF 01 90 10 12 01 00 04 FF 44 01 03 F2 FF 22 My generate RSA Keys Command is as follows: F0 46 03 40 04 00 00 00 11 It sends me back a "69 82", which means that either the CHV1 AC was not satisfied or an unsupported value was specified as the public exponent. I have performed preceding "verify chv" and "verify key" commands, but I get the same response. Is it the public exponent? Is the example in de Guide incorrect? Thanks, -- Eelco Daams Internet Developer BuyWays, de bouwers van www.surfze.nl ______________________________________________________ BuyWays Internet Strategie & Technologie Damsterdiep 31a/b 9711 SG GRONINGEN tel. 050-3118123 fax 050-3118124 gsm 06-10090866 http://www.buyways.nl _______________________________________________________ Op al onze diensten zijn onze algemene voorwaarden voor dienstverlening van toepassing, zoals gedeponeerd bij de Kamer van Koophandel te Groningen, onder nummer 3057. *************************************************************** Unix Smart Card Developers - M.U.S.C.L.E. (Movement for the Use of Smart Cards in a Linux Environment) http://www.linuxnet.com/ To unsubscribe send an email to [EMAIL PROTECTED] with unsubscribe sclinux ***************************************************************
