Hi, Mitch.
I don't know your reader, nor do I use Linux, but I have had some
problems with Towitoko readers on Solaris recently. One thing I
learned is to test the driver separately from pcsc-lite. In my case,
Carlos Prados provided a test program with the driver that let me
test the driver before I even built pcscd. If your driver comes with
such a program, give it a try.
Hope this helps.
Regards,
Douglas
> ---------- Mensagem original -----------
>
> De : [EMAIL PROTECTED]
> Para : [EMAIL PROTECTED]
> Cc :
> Data : Mon, 4 Mar 2002 17:18:51 +0000 (GMT)
> Assunto : MUSCLE SCM SCR-301 0.9.0 USB driver in Linux
>
>
> Hi all,
>
> Has anyone got this driver to work with pcscd ?
> The driver compiled and installed fine, and the userland
> pcscd daemon runs fine. Messages on the console
>
> Mar 4 16:56:54 client pcscd: Warning couldn't open config
file /etc/reader.conf.
> Mar 4 16:56:54 client pcscd: pcscdaemon.c 202: main: PC/SC Lite
Daemon Ready.
>
> For USB you don't need the /etc/reader.conf file, so i ignore the
message
> above. Then i run the testpcsc command and get in the console
>
> Mar 4 16:57:01 client pcscd: winscard_msg.c 210: SHMProcessEvents:
Common channel packet arrival.
> Mar 4 16:57:28 client pcscd: winscard.c 66:
SCardEstablishContext: Establishing Context: 16984768
>
> and on the command line i get (i had to add a fflush(stdout) to
test.c or
> else i don't see the "Please insert reader ...." message)
>
> # ./testpcsc
>
> MUSCLE PC/SC Lite Test Program
>
> Testing SCardEstablishContext : Command successful.
> Testing SCardGetStatusChange
> Please insert a working reader :
>
>
> I shove my card in and out, upside down, downside up, but no
response
> after that. If i strace the command i get
>
> write(1, "Please insert a working reader "..., 35Please insert a
working reader : ) = 35
> open("/tmp/pcsc/.pcsctmp", O_RDWR) = 5
> flock(5, LOCK_EX|LOCK_NB) = -1 EAGAIN (Resource
temporarily unavailable)
> close(5) = 0
> open("/tmp/pcsc/.pcsctmp", O_RDWR) = 5
> flock(5, LOCK_EX|LOCK_NB) = -1 EAGAIN (Resource
temporarily unavailable)
> close(5) = 0
> nanosleep({0, 200000000}, NULL) = 0
> [The last 4 lines repeat ad-infinitum]
>
> the prog loops because of
>
> rv = SCardGetStatusChange( hContext, INFINITE, 0, 0 );
>
> in test.c, but why isn't it recogonising my card ? This is a vaild
> card and i have tried 2 or 3 different cards unsuccesfully. This
leads
> me to believe that this is a problem with the driver and not me or
> my hardware. So has anyone else gotten this to work ??
>
> Control-C releases the driver correctly
>
>
> Mar 4 17:11:50 client pcscd: winscard.c 77: SCardReleaseContext:
Releasing Context: 16998555
> Mar 4 17:11:50 client pcscd: pcscdaemon.c 88: SVCServiceRun:
Client 10 has disappeared.
>
>
> My setup:
>
> # uname -a
> Linux client 2.4.18 #61 Mon Mar 4 15:02:26 GMT 2002 i686 unknown
>
> # dmesg|grep -i SmartOS
> Product: SmartOS USB Reader
> # dmesg|grep -i 0x66
> usb.c: USB device 4 (vend/prod 0x66/0x1001) is not claimed by any
active driver.
>
> 0x66/0x1001 is the vend/prod id for the SCM driver
>
> #
egrep '66|1001' /usr/local/pcsc/drivers/scm310Driver.bundle/Contents/I
nfo.plist
> <string>0x0066</string>
> <string>0x1001</string>
>
>
> pcsc-lite version 1.0.1.
>
>
> Any ideas ?
>
> Mitch
>
> ***************************************************************
> Unix Smart Card Developers - M.U.S.C.L.E.
> (Movement for the Use of Smart Cards in a Linux Environment)
> http://www.linuxnet.com/
> To unsubscribe send an email to [EMAIL PROTECTED] with
> unsubscribe sclinux
> ***************************************************************
>
>
***************************************************************
Unix Smart Card Developers - M.U.S.C.L.E.
(Movement for the Use of Smart Cards in a Linux Environment)
http://www.linuxnet.com/
To unsubscribe send an email to [EMAIL PROTECTED] with
unsubscribe sclinux
***************************************************************
