Hal V. Engel wrote: > On Saturday 21 October 2006 10:29, Craig Ringer wrote: >> Plinnell wrote: >>> On Saturday 21 October 2006 17:11, Philipp Klaus Krause wrote: >>>> I have a Belinea 10 19 10. The documentation claims it can do >>>> 6500K, 9300K, "User" and "sRGB", but not 5500K.
i have a kds 17" avitron monitor and i have found that most of the presets (9500, 6500 and 5500)are either too warm or too cool. i currently use the user setting with the rgb values set at 50% each. this give me a neutral color. as long as all of the rgb values are the same there should be no color shift. of course the more or less the percentage adjusts the "brightness" of the neutral value. i also have set the color profile of the monitor to srgb (i work primarily for web production), but what we are talking about is monitor output. i have produced a pdf for the printer and printed to a non-postscript printer for proofing with good results. i have not tested with a commercial printer though. i would recommend if you decide to give this a go, being the daily users that you are, that you run a test with your commercial printer. however, with the cymk output provided by scribus should not affect negatively the results you are used to. hth, dwain
