On Thu, 16 Feb 2012 08:27:42 +0100 ale rimoldi <ale.comp_06 at xox.ch> wrote:
> hi > > > Am 15.02.2012 01:34, schrieb john Culleton: > > > On Tue, 14 Feb 2012 20:51:32 +0100 Franz Schmid > > > <Franz.Schmid at altmuehlnet.de> wrote: > > > > > >>> > > >>> I just built svn head without problems. > > >> You need a fairly recent version of poppler to compile, > > >> which version of poppler do you have? > > >> > > >> Franz Schmid > > > > > > poppler-0.18.3. > > > > > > Installed yesterday. Ran ldconfig. Just rebooted. Error > > > recurs. Should I back up to poppler-0.18? > > Hmm, don't know. Yesterday i've tested poppler-0.18.3 and it > > compiled fine here. Maybe the compiler just gets the wrong > > include path for poppler. > > several months ago, i've tried to get scribus to use a poppler > installed in at a custom location... but i could not get it to > work... (it was at /usr/local/poppler/) > > ciao a.l.e > OK I am stuck again. I wiped out all references to poppler in /usr/local/bin, /usr/local/lib and /usr/local/include. I made three separate compiles for poppler, one with prefix /usr/share, one with prefix /usr and one with prefix / . I ran make install and ldconfig after each compile. I wiped my work directory for scribus 150 clean. After all this I still blow up with this message: ------------------------------------------------------- CMake Error: The following variables are used in this project, but they are set to NOTFOUND. Please set them or make sure they are set and tested correctly in the CMake files: POPPLER_INCLUDE_DIR used as include directory in directory /usr/local/src/s150 used as include directory in directory /usr/local/src/s150/scribus used as include directory in directory /usr/local/src/s150/scribus/dtd used as include directory in directory /usr/local/src/s150/scribus/manpages used as include directory in directory /usr/local/src/s150/scribus/colormgmt used as include directory in directory /usr/local/src/s150/scribus/desaxe used as include directory in directory /usr/local/src/s150/scribus/fonts used as include directory in directory /usr/local/src/s150/scribus/styles ---etc So if I am to set the include directory manually with a set statement where should I set it? e.g., /include /usr/include /usr/share/include other? -- John Culleton Free list of books for self-publishers: http://wexfordpress.net/shortlist.html "Create Book Covers with Scribus" http://www.booklocker.com/books/4055.html
