Hello. I just recently upgraded to:
SDCC :
cs51/gbz80/z80/avr/ds390/pic16/pic14/TININative/xa51/ds400/hc08
2.7.0 #4818 (Aug 18 2007) (UNIX)
I have the following ASM code (which used to assemble,
compile, and link fine):
.module serialA
.globl _main
.area DSEG (DATA)
.area OSEG (OVR,DATA)
.area SSEG (DATA)
.area ISEG (DATA)
.area BSEG (BIT)
.area XSEG (XDATA)
.area CSEG (CODE)
.area GSINIT (CODE)
.area GSFINAL (CODE)
.area GSINIT (CODE)
_main:
mov scon,#0x52
setb tr1
mov tmod,#0x21
mov th1,#0xFA
mov r0,#0x07
mov r1,#0x0c
mov r2,#0x04
mov r3,#0x08
lcall and16
mov a,r0
lcall print_2dig_hex
mov a,r1
lcall print_2dig_hex
jnb ti,.
ljmp $0
and16: ; 16bit AND takes 6
cycles
xch a,r0
anl a,r2
xch a,r0
xch a,r1
anl a,r3
xch a,r1
ret
print_2dig_hex:
mov b,a
anl a,#0xf0
swap a
lcall write_ascii
mov a,b
anl a,#0x0f
lcall write_ascii
lcall print_space
ret
write_ascii:
mov dptr,#hexadecimal
movc a,@a+dptr
jnb ti,.
clr ti
mov sbuf,a
ret
carriage_return:
jnb ti,.
clr ti
mov sbuf,#0x0a
ret
print_space:
jnb ti,.
clr ti
mov sbuf,#0x20
ret
hexadecimal:
.db 48,49,50,51,52,53,54,55,56,57,65,66,67,68,69,70
I assemble the above ASM with:
/usr/local/src/sdcc/bin/asx8051 -o -l and16.asm
All appears to be OK at this point. It generates two
files:
and16.rel
and16.lst
I then compile with:
/usr/local/src/sdcc/bin/sdcc
-I/usr/local/src/sdcc/device/include
-L/usr/local/src/sdcc/device/lib
-L/usr/local/src/sdcc/device/lib/mcs51 --code-loc
0x8000 and16.rel
and get the following output:
ASlink-Warning-No definition of area HOME
This is wrong. Here is the output of and16.lnk:
-myuxi
-Y
-b HOME = 0x8000
-b ISEG = 0x0000
-b BSEG = 0x0000
-k /usr/local/src/sdcc/device/lib
-k /usr/local/src/sdcc/device/lib/mcs51
-k /usr/local/src/sdcc/bin/../share/sdcc/lib/small
-k /usr/local/share/sdcc/lib/small
-l mcs51
-l libsdcc
-l libint
-l liblong
-l libfloat
and16.rel
-e
Here is the output of and16.map:
Hexadecimal
Area Addr Size
Decimal Bytes (Attributes)
-------------------------------- ---- ----
------- ----- ------------
. .ABS. 0000 0000 =
0. bytes (ABS,CON)
Value Global
-------- --------------------------------
FFFFFF00 s_BSEG
0000 l_BIT_BANK
0000 l_BSEG
0000 l_BSEG_BYTES
0000 l_CSEG
0000 l_DSEG
0000 l_GSFINAL
0000 l_ISEG
0000 l_OSEG
0000 l_REG_BANK_0
0000 l_REG_BANK_1
0000 l_REG_BANK_2
0000 l_REG_BANK_3
0000 l_SSEG
0000 l_XSEG
0000 l__CODE
0000 s_BSEG_BYTES
0000 s_CSEG
0000 s_DSEG
0000 s_GSINIT
0000 s_ISEG
0000 s_REG_BANK_0
0000 s_SSEG
0000 s_XSEG
0008 s_REG_BANK_1
0010 s_REG_BANK_2
0018 s_BIT_BANK
0018 s_OSEG
0018 s_REG_BANK_3
0020 s__CODE
006C l_GSINIT
006C s_GSFINAL
0100 l_IRAM
Hexadecimal
Area Addr Size
Decimal Bytes (Attributes)
-------------------------------- ---- ----
------- ----- ------------
GSINIT 0000 006C =
108. bytes (REL,CON,CODE)
Value Global
-------- --------------------------------
0C:0000 _main
^LASxxxx Linker V01.75 + NoICE + SDCC Feb 1999, page
1.
Files Linked [ module(s) ]
and16.rel
^LASxxxx Linker V01.75 + NoICE + SDCC Feb 1999, page
2.
User Base Address Definitions
HOME = 0x8000
ISEG = 0x0000
BSEG = 0x0000
^L
It very clearly knows that HOME is 0x8000. Why does it
pretend to not know this? Any help is appreciated. 2.7
is turning out to be a big disappointment.
____________________________________________________________________________________
Park yourself in front of a world of choices in alternative vehicles. Visit the
Yahoo! Auto Green Center.
http://autos.yahoo.com/green_center/
-------------------------------------------------------------------------
This SF.net email is sponsored by: Splunk Inc.
Still grepping through log files to find problems? Stop.
Now Search log events and configuration files using AJAX and a browser.
Download your FREE copy of Splunk now >> http://get.splunk.com/
_______________________________________________
Sdcc-user mailing list
Sdcc-user@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/sdcc-user
