Hi Raphael, Thanks for answering
El vie, 10-04-2009 a las 02:54 +0200, Raphael Neider escribió: > Hi, > > > I am trying the sdcc 2.9.0 for the PIC16F876A device. I have found > > that the floating point operations are not working well when negative > > numbers are used. > > The PIC14 port was missing a routine implementing unary minus on floats > ... and the floating point libraries were broken (fsadd, fs2ulong). I now > changed the pic14 fp libraries to match the pic16 libs and cleaned them a > bit --- please upgrade to a snapshot including svn r5430 and try again. I > would be very happy to receive feedback, both success and failure. I have tested the test-floatx.c programs that I sent to the list and now they work well :-) I have used svn sdcc r5431 I am going to test some more advanced programs (using the sinf() function) and tell you the results. Thanks you very much :-) Best regards, Juan > > Best regards, > Raphael > > ------------------------------------------------------------------------------ > This SF.net email is sponsored by: > High Quality Requirements in a Collaborative Environment. > Download a free trial of Rational Requirements Composer Now! > http://p.sf.net/sfu/www-ibm-com > _______________________________________________ > Sdcc-user mailing list > [email protected] > https://lists.sourceforge.net/lists/listinfo/sdcc-user -- Juan Gonzalez Gomez Blog: http://www.iearobotics.com/blog/ Web : http://www.iearobotics.com/juan ------------------------------------------------------------------------------ This SF.net email is sponsored by: High Quality Requirements in a Collaborative Environment. Download a free trial of Rational Requirements Composer Now! http://p.sf.net/sfu/www-ibm-com _______________________________________________ Sdcc-user mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/sdcc-user
