thanks - i will try this later today On 29.05.2013 10:22, Valentin Dudouyt wrote: > This case is described in the section 3.9.1 of SDCC user's manual: >> If you have multiple source files in your project, interrupt service >> routines can be present in any of them, but a >> prototype of the isr MUST be present or included in the file that >> contains the function main. > On 29.05.2013 15:17, Georg Ottinger wrote: >> i am using #8680 - I compile a number of .c files into .rel and link >> them afterwards. >> >> for example main.c holds the main-function. rx_ringbuffer.c the uart >> interrupt and led.c the timer interrupt. >> >> When looking at the final .ihx File only the RESET-Interrupt Vector is >> filled in with the address of the initializer code. All other interrupt >> vectors are 00 00 00 >> >> Source is at >> http://sourceforge.net/p/oggstreamer/oggs-stm8-firmware-001/ci/master/tree/ >> >> > > ------------------------------------------------------------------------------ > Introducing AppDynamics Lite, a free troubleshooting tool for Java/.NET > Get 100% visibility into your production application - at no cost. > Code-level diagnostics for performance bottlenecks with <2% overhead > Download for free and get started troubleshooting in minutes. > http://p.sf.net/sfu/appdyn_d2d_ap1 > _______________________________________________ > Sdcc-user mailing list > Sdcc-user@lists.sourceforge.net > https://lists.sourceforge.net/lists/listinfo/sdcc-user
------------------------------------------------------------------------------ Introducing AppDynamics Lite, a free troubleshooting tool for Java/.NET Get 100% visibility into your production application - at no cost. Code-level diagnostics for performance bottlenecks with <2% overhead Download for free and get started troubleshooting in minutes. http://p.sf.net/sfu/appdyn_d2d_ap1 _______________________________________________ Sdcc-user mailing list Sdcc-user@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/sdcc-user
