Few years ago I made this http://jaromir.xf.cz/pic89/pic89prog.html programmer for Atmel 8051 SPI ISP programmable parts - at first it was just a joke, but it proven quite useful later. Using ASCII serial protocol it works under all OS-es by design, I'd say you ran run it under Z80 CPM easily. The sources are for Microchip XC8 compiler, but don't use any special features of the compiler, so porting to SDCC should be piece of cake. The PIC89PROG comes from the days of XC8 only - nowadays I make my public projects to be compilable with both XC8 and SDCC. I seriously thought for a few times of expanding it to support C2 programming protocol (and porting to SDCC along the way) and subsequently Silabs MCU. The protocol itself is pretty well described in Silabs appnotes. On the other hand, I'm not exactly sure it the Silabs 8-bitters are useful for anyone those days. Are those Silabs parts really interesting or people tend to use older 8051 parts? What about SDCC support of those little cheap chips?
2016-08-09 18:48 GMT+02:00 Benjamin Larsson <benja...@southpole.se>: > >> Why not? Simplicity Studio is available for Windows, Linux and OS X. >> >> Maarten > > > Simplicity Studio does not support C2 programmers under linux. At least > I was not able to get it working. > > The http://ec2drv.sourceforge.net/ should be able to program the efm8 > chip if it is not to different from C8051F. > > MvH > Benjamin Larsson > > ------------------------------------------------------------------------------ > What NetFlow Analyzer can do for you? Monitors network bandwidth and traffic > patterns at an interface-level. Reveals which users, apps, and protocols are > consuming the most bandwidth. Provides multi-vendor support for NetFlow, > J-Flow, sFlow and other flows. Make informed decisions using capacity > planning reports. http://sdm.link/zohodev2dev > _______________________________________________ > Sdcc-user mailing list > Sdcc-user@lists.sourceforge.net > https://lists.sourceforge.net/lists/listinfo/sdcc-user ------------------------------------------------------------------------------ What NetFlow Analyzer can do for you? Monitors network bandwidth and traffic patterns at an interface-level. Reveals which users, apps, and protocols are consuming the most bandwidth. Provides multi-vendor support for NetFlow, J-Flow, sFlow and other flows. Make informed decisions using capacity planning reports. http://sdm.link/zohodev2dev _______________________________________________ Sdcc-user mailing list Sdcc-user@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/sdcc-user
