On Sun, Aug 27, 2017 at 12:16 AM, R0b0t1 <r03...@gmail.com> wrote: > Hello, > > I apologize if this is too product-specific for this list. I've a > development board from Silicon Labs and have just demoed the product > with the manufacturer's software. However, my real intent was to use > SDCC and OpenOCD to program the board. To this end I would like some > recommendations on compiling software for the EFM8 line. > > I seem to have found the headers in > "C:\SiliconLabs\SimplicityStudio\v4\developer\sdks\8051\v4.0.7\Device\EFM8SB2" > and > "C:\SiliconLabs\SimplicityStudio\v4\developer\sdks\8051\v4.0.7\Device\shared\si8051Base". > I expect to be able to copy these into a project directory, add them > to the include path, and invoke sdcc. Should I expect source > compatibility with Keil C51? > > Having done this with STM32 parts, I found there were third party > libraries for those parts. Is this the same with Silicon Labs parts? I > do not expect this to be the case, but I think I should ask. > > As for OpenOCD - I expect to be able to use the integrated Segger > J-Link and for that to automatically select C2 by default (or for > OpenOCD to do it, I am still a bit confused on that part). If not I > feel I can follow up on this myself, but any hints are appreciated. > > > I feel this are generally basic questions but I *didn't* ask some > basic questions the last time I did this general process and ended up > wasting a bunch of time. > > Thanks in advance, > R0b0t1
Seems like I will be having the most issue setting up OpenOCD, as I expected. I might follow up here once I find an appropriate configuration. Sorry for the post to the list but I was pretty confused for an hour or two. Cheers! ------------------------------------------------------------------------------ Check out the vibrant tech community on one of the world's most engaging tech sites, Slashdot.org! http://sdm.link/slashdot _______________________________________________ Sdcc-user mailing list Sdcc-user@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/sdcc-user
