Hi, as part of a small exercise project for university I have to add a custom software interrupt to the bios code which is then used by some later booting stages. I already had a close look to the sourcefiles and although I don't understand many of the stuff (I can read and understand the individual parts but don't get the real big picture) I have some anchorpoints which I think are necessary to complete my work. I'd really appreciate if someone had a quick look on those points and just confirmed or denied (maybe with other hints) them :)
1.) the IVT is set up in "post.c", to add my interrupt, I have to add a line "SET_IVT(0x60, FUNC16(entry_60));" to init_ivt() 2.) romlayout.S contains the declarations for the IRQ handler, I have to add a "DECL_IRQ_ENTRY_ARG 60" to the section "irqentryarg:" 3.) in my own .c-file I have to add a function "void VISIBLE16 handle_60(struct bregs *regs)" which receives the IRQ 4.) in this custom function I receive the set parameters from the caller in the register-structure and also set my return values in this 5.) usable registers for arguments/return values are AX, BX, CX, DX, DS, etc. I'd need DS:DX (analog to DOS) for passing a memory address and CS:CX for a buffer size. 6.) the IRQ handler has to end with "set_success(regs);" or "set_invalid(regs);" to return success/failure in CF (or should I use AX for this and just call set_success?) One last question: I chose IRQ 60 because it's stated as "user defined" in "post.c". Should I use another one to not run into issues with later stages of OS booting or will it just get overwritten at some point? Thanks in advance, Kosi _______________________________________________ SeaBIOS mailing list SeaBIOS@seabios.org http://www.seabios.org/mailman/listinfo/seabios
