> -----Original Message----- > From: seabios-bounces+kerry.she=amd....@seabios.org [mailto:seabios- > bounces+kerry.she=amd....@seabios.org] On Behalf Of Kevin O'Connor > Sent: Friday, October 14, 2011 7:15 AM > To: Wolfgang Kamp - datakamp > Cc: seabios@seabios.org; coreb...@coreboot.org > Subject: Re: [SeaBIOS] usb boot issue > > On Thu, Oct 13, 2011 at 03:56:48PM +0200, Wolfgang Kamp - datakamp wrote: > > > > Hi, > > > > is there any solution for the usb boot issue of the AMD SB800 Persimmon > platform > > with SeaBIOS 1.6.3 and actual Coreboot version? > > I'm unfamiliar with the issue. Can you post the SeaBIOS debug output > along with a description of the issue you are seeing?
I got the similar problem with seabios commit 8a161c9f5 I'm using a EHCI CDROM drive, I have a simple test on sb700 and sb800 platform. After boot to Linux OS, the Ehci CDROM drive can works fine. I suspect whether the seabios ehci driver is full support EHCI device? Following text is the seabios log with log level 3. Thanks SeaBIOS (version pre-0.6.3-20111014_111147-Debian-vg0) init usb EHCI init on dev 00:12.2 (regs=0xfe105420) /7ffd2000\ Start thread /7ffd1000\ Start thread /7ffd0000\ Start thread /7ffcf000\ Start thread /7ffce000\ Start thread /7ffcd000\ Start thread /7ffcc000\ Start thread EHCI init on dev 00:13.2 (regs=0xfe105520) /7ffca000\ Start thread /7ffc9000\ Start thread /7ffc8000\ Start thread /7ffc7000\ Start thread /7ffc6000\ Start thread /7ffc5000\ Start thread /7ffc4000\ Start thread OHCI init on dev 00:14.5 (regs=0xfe104000) /7ffc3000\ Start thread init ps2port /7ffc2000\ Start thread |7ffc2000| Searching CBFS for prefix etc/ps2-keyboard-spinup init lpt Found 0 lpt ports init serial Found 1 serial ports init floppy drives init hard drives ATA controller 1 at 1020/1040/0 (irq 0 dev 88) /7ffc1000\ Start thread \7ffc1000/ End thread ATA controller 2 at 1028/1044/0 (irq 0 dev 88) /7ffc1000\ Start thread \7ffc1000/ End thread ATA controller 3 at 1f0/3f4/0 (irq 14 dev a1) /7ffc1000\ Start thread \7ffc1000/ End thread ATA controller 4 at 170/374/0 (irq 15 dev a1) /7ffc1000\ Start thread \7ffc1000/ End thread init ahci Searching CBFS for prefix img/ Searching CBFS for prefix floppyimg/ \7ffd1000/ End thread \7ffcf000/ End thread \7ffce000/ End thread \7ffcd000/ End thread \7ffcc000/ End thread \7ffc9000/ End thread \7ffc8000/ End thread \7ffc7000/ End thread \7ffc6000/ End thread \7ffc4000/ End thread /7ffd1000\ Start thread \7ffd1000/ End thread /7ffd1000\ Start thread \7ffd1000/ End thread \7ffc3000/ End thread |7ffc2000| Got ps2 nak (status=51) |7ffc2000| ps2 command 2ff failed (aux=0) \7ffc2000/ End thread |7ffd0000| set_address 0x7ffd37a0 |7ffd0000| config_usb: 0x7ffd343c |7ffc5000| OHCI init on dev 00:13.0 (regs=0xfe102000) /7ffd1000\ Start thread |7ffc5000| OHCI init on dev 00:13.1 (regs=0xfe103000) /7ffcf000\ Start thread \7ffc5000/ End thread \7ffca000/ End thread /7ffce000\ Start thread \7ffce000/ End thread /7ffce000\ Start thread \7ffce000/ End thread /7ffce000\ Start thread \7ffce000/ End thread \7ffd1000/ End thread /7ffd1000\ Start thread \7ffd1000/ End thread /7ffd1000\ Start thread /7ffce000\ Start thread \7ffce000/ End thread |7ffd1000| set_address 0x7ffd33c0 |7ffd1000| config_usb: 0x7ffd34f0 |7ffd1000| device rev=0110 cls=00 sub=00 proto=00 size=40 |7ffd1000| usb_hid_init 0x7ffd34f0 |7ffd1000| ebda moved from 9fc00 to 9f800 |7ffd1000| USB mouse initialized \7ffd1000/ End thread \7ffcf000/ End thread |7ffd0000| WARNING - Timeout at ehci_wait_qh:316! \7ffd0000/ End thread \7ffd2000/ End thread All threads complete. > -Kevin > > _______________________________________________ > SeaBIOS mailing list > SeaBIOS@seabios.org > http://www.seabios.org/mailman/listinfo/seabios _______________________________________________ SeaBIOS mailing list SeaBIOS@seabios.org http://www.seabios.org/mailman/listinfo/seabios
