On Thu, Mar 14, 2013 at 03:57:00PM +0100, Paul Menzel wrote: > Dear SeaBIOS folks, > > > I am using coreboot on the ASRock E350M1 [1] with a SATA hard drive, I > want to boot from using the GRUB2 bootloader. For now I’d like to use > SeaBIOS 1.7.2.1 for jumping to the hard drive and execute(?) GRUB2. > > Using the default config file created by `make menuconfig` and selecting > a coreboot build and serial debug, everything works fine. > > As I am using Debian GNU/Linux I do not need any BIOS calls provided by > SeaBIOS and want to disable as much as possible too. So I disabled most > stuff, but could not boot from the hard drive.
Can you up the debug level to 8 on the failed boot case and report the results? -Kevin _______________________________________________ SeaBIOS mailing list SeaBIOS@seabios.org http://www.seabios.org/mailman/listinfo/seabios