2013/9/13 Gerd Hoffmann <[email protected]>: > $subject says all. Support for usb3 streams is not implemented yet, > otherwise it is fully functional. Tested all usb devices supported > by qemu (keyboard, storage, usb hubs), except for usb attached scsi > in usb3 mode (which needs streams). > > Tested on qemu only, tagged with QEMU_HARDWARE because of that. > Testing with physical hardware to be done.
Booting an Asus F2A85-M, with CONFIG_DEBUG_LEVEL=7 and a keyboard (Chesen PS/2-to-USB bridge) in one of its USB3 ports: SeaBIOS (version rel-1.7.3-68-g0b3607f-dirty-20130924_163327-mint) init usb XHCI init on dev 00:10.0: regs @ 0xf0148000, 4 ports, 32 slots XHCI extcap 0x1 @ f0148500 XHCI protocol USB 3.00, 2 ports (offset 1) XHCI protocol USB 2.00, 2 ports (offset 3) /bf101000\ Start thread |bf101000| configure_xhci: resetting XHCI init on dev 00:10.1: regs @ 0xf014a000, 4 ports, 32 slots XHCI extcap 0x1 @ f014a500 XHCI protocol USB 3.00, 2 ports (offset 1) XHCI protocol USB 2.00, 2 ports (offset 3) /bf100000\ Start thread |bf100000| configure_xhci: resetting /bf0ff000\ Start thread |bf0ff000| xhci_hub_detect port #1: 0x000002a0, powered, pls 5, speed 0 [ - ] \bf0ff000/ End thread EHCI init on dev 00:12.2 (regs=0xf014f820) /bf0ff000\ Start thread /bf0fe000\ Start thread /bf0fc000\ Start thread |bf0fc000| xhci_hub_detect port #1: 0x000002a0, powered, pls 5, speed 0 [ - ] \bf0fc000/ End thread /bf0fc000\ Start thread |bf0fc000| xhci_hub_detect port #2: 0x000002a0, powered, pls 5, speed 0 [ - ] \bf0fc000/ End thread EHCI init on dev 00:13.2 (regs=0xf014f920) /bf0fc000\ Start thread /bf0fb000\ Start thread /bf0fa000\ Start thread \bf0fe000/ End thread /bf0fe000\ Start thread |bf0fe000| xhci_hub_detect port #2: 0x000002a0, powered, pls 5, speed 0 [ - ] \bf0fe000/ End thread /bf0fe000\ Start thread |bf0fe000| xhci_hub_detect port #3: 0x000202e1, powered, pls 7, speed 0 [ - ] |bf0fe000| xhci_hub_reset port #3: 0x000202e1, powered, pls 7, speed 0 [ - ] OHCI init on dev 00:14.5 (regs=0xf014e000) /bf0f9000\ Start thread /bf0f8000\ Start thread \bf0fb000/ End thread /bf0fb000\ Start thread \bf0fa000/ End thread /bf0fa000\ Start thread |bf0fa000| xhci_hub_detect port #3: 0x000002a0, powered, pls 5, speed 0 [ - ] \bf0fa000/ End thread /bf0fa000\ Start thread |bf0fa000| xhci_hub_detect port #4: 0x000002a0, powered, pls 5, speed 0 [ - ] \bf0fa000/ End thread init ps2port /bf0fa000\ Start thread |bf0fa000| i8042_flush |bf0fa000| i8042_command cmd=1aa |bf0fa000| i8042_wait_write |bf0fa000| i8042_wait_read |bf0fa000| i8042 param=55 |bf0fa000| i8042_command cmd=1ab |bf0fa000| i8042_wait_write |bf0fa000| i8042_wait_read |bf0fa000| i8042 param=0 |bf0fa000| ps2_command aux=0 cmd=2ff |bf0fa000| i8042 ctr old=30 new=30 |bf0fa000| i8042_command cmd=1060 |bf0fa000| i8042_wait_write |bf0fa000| i8042_wait_write /bf0f7000\ Start thread \bf0f8000/ End thread /bf0f8000\ Start thread \bf0fb000/ End thread /bf0fb000\ Start thread |bf0fb000| xhci_hub_detect port #4: 0x000202e1, powered, pls 7, speed 0 [ - ] |bf0fb000| xhci_hub_reset port #4: 0x000202e1, powered, pls 7, speed 0 [ - ] |bf0fe000| XHCI port #3: 0x00200a03, powered, enabled, pls 0, speed 2 [Low] |bf0fe000| set_address 0x000edc00 |bf0fe000| xhci_alloc_pipe: usbdev 0xbf102070, ring 0xbf11e500, slotid 0, epid 1 init lpt Found 0 lpt ports init serial Found 1 serial ports init floppy drives init hard drives init ahci AHCI controller at 11.0, iobase f014f000, irq 0 AHCI: cap 0xf3309f07, ports_impl 0x4 /bf0f6000\ Start thread |bf0f6000| AHCI/2: probing |bf0f6000| AHCI/2: link up |bf0fa000| i8042_command cmd=1060 |bf0fa000| i8042_wait_write |bf0fa000| i8042_wait_write |bf0fa000| ps2_sendbyte aux=0 cmd=ff |bf0fa000| i8042_kbd_write c=255 |bf0fa000| i8042_wait_write /bf0f5000\ Start thread \bf0f5000/ End thread /bf0f5000\ Start thread \bf0f7000/ End thread /bf0f7000\ Start thread \bf0f8000/ End thread |bf0fb000| XHCI port #4: 0x00200e03, powered, enabled, pls 0, speed 3 [High] |bf0fb000| set_address 0x000edb90 |bf0fb000| xhci_alloc_pipe: usbdev 0xbf0fdea0, ring 0xbf11e300, slotid 0, epid 1 |bf0fe000| xhci_cmd_enable_slot: |bf0fe000| xhci_trb_queue: ring 0xbf11ed00 [nidx 1, len 0] |bf0fe000| xhci_process_events: status change port #3 |bf0fe000| xhci_process_events: status change port #3 |bf0fe000| xhci_process_events: ring 0xbf11ed00 [trb 0xbf11ed00, evt 0xbf11ee00, type 33, eidx 1, cc 1] |bf0fe000| xhci_control: enable slot: got slotid 1 |bf0fe000| xhci_control: root port 3, route 0x0 |bf0fe000| xhci_cmd_address_device: slotid 1 |bf0fe000| xhci_trb_queue: ring 0xbf11ed00 [nidx 2, len 0] init megasas |bf0f6000| AHCI/2: ... finished, status 0x51, ERROR 0x4 |bf0fa000| ps2 read fe |bf0fa000| Got ps2 nak (status=51) |bf0fa000| i8042_command cmd=1060 |bf0fa000| i8042_wait_write |bf0fa000| i8042_wait_write |bf0fa000| ps2 command 2ff failed (aux=0) \bf0fa000/ End thread /bf0fa000\ Start thread \bf0fa000/ End thread /bf0fa000\ Start thread \bf0f5000/ End thread \bf0f7000/ End thread |bf0fb000| xhci_cmd_enable_slot: |bf0fb000| xhci_trb_queue: ring 0xbf11ea00 [nidx 1, len 0] |bf0fb000| xhci_process_events: status change port #4 |bf0fb000| xhci_process_events: status change port #4 |bf0fb000| xhci_process_events: ring 0xbf11ea00 [trb 0xbf11ea00, evt 0xbf11eb00, type 33, eidx 1, cc 1] |bf0fb000| xhci_control: enable slot: got slotid 1 |bf0fb000| xhci_control: root port 4, route 0x0 |bf0fb000| xhci_cmd_address_device: slotid 1 |bf0fb000| xhci_trb_queue: ring 0xbf11ea00 [nidx 2, len 0] |bf0fe000| xhci_process_events: ring 0xbf11ed00 [trb 0xbf11ed10, evt 0xbf11ee00, type 33, eidx 2, cc 1] |bf0f6000| Searching bootorder for: /pci@i0cf8/*@11/drive@2/disk@0 |bf0f9000| ohci_free_pipes 0xbf0fdda0 \bf0fa000/ End thread |bf0ff000| ehci_free_pipes 0xbf102180 |bf0fb000| xhci_process_events: ring 0xbf11ea00 [trb 0xbf11ea10, evt 0xbf11eb00, type 33, eidx 2, cc 1] |bf0fe000| xhci_update_pipe: usbdev 0xbf102070, ring 0xbf11e500, slotid 1, epid 1 |bf0fe000| config_usb: 0xbf11e620 |bf0fe000| xhci_trb_queue: ring 0xbf11e500 [nidx 1, len 8] |bf0fe000| xhci_trb_queue: ring 0xbf11e500 [nidx 2, len 8] |bf0fe000| xhci_trb_queue: ring 0xbf11e500 [nidx 3, len 0] |bf0fe000| xhci_xfer_kick: ring 0xbf11e500, slotid 1, epid 1 |bf0f6000| AHCI/2: registering: "AHCI/2: Maxtor 6L250S0 ATA-7 Hard-Disk (233 GiBytes)" |bf0f6000| Registering bootable: AHCI/2: Maxtor 6L250S0 ATA-7 Hard-Disk (233 GiBytes) (type:2 prio:103 data:f4840) \bf0f6000/ End thread \bf0f9000/ End thread |bf0fc000| ehci_free_pipes 0xbf0fdfb0 |bf0fb000| xhci_update_pipe: usbdev 0xbf0fdea0, ring 0xbf11e300, slotid 1, epid 1 |bf0fb000| config_usb: 0xbf11e420 |bf0fb000| xhci_trb_queue: ring 0xbf11e300 [nidx 1, len 8] |bf0fb000| xhci_trb_queue: ring 0xbf11e300 [nidx 2, len 8] |bf0fb000| xhci_trb_queue: ring 0xbf11e300 [nidx 3, len 0] |bf0fb000| xhci_xfer_kick: ring 0xbf11e300, slotid 1, epid 1 \bf0ff000/ End thread |bf0fb000| xhci_process_events: ring 0xbf11e300 [trb 0xbf11e320, evt 0xbf11e400, type 32, eidx 3, cc 6] |bf0fb000| xhci_control: control xfer failed (cc 6) |bf0fb000| xhci_cmd_disable_slot: slotid 1 |bf0fb000| xhci_trb_queue: ring 0xbf11ea00 [nidx 3, len 0] \bf0fc000/ End thread |bf0fb000| xhci_process_events: ring 0xbf11ea00 [trb 0xbf11ea20, evt 0xbf11eb00, type 33, eidx 3, cc 1] \bf0fb000/ End thread |bf100000| XHCI no devices found \bf100000/ End thread |bf0fe000| WARNING - Timeout at xhci_event_wait:403! |bf0fe000| xhci_control: control xfer failed (cc -1) |bf0fe000| xhci_cmd_disable_slot: slotid 1 |bf0fe000| xhci_trb_queue: ring 0xbf11ed00 [nidx 3, len 0] |bf0fe000| xhci_process_events: ring 0xbf11ed00 [trb 0xbf11ed20, evt 0xbf11ee00, type 33, eidx 3, cc 1] \bf0fe000/ End thread |bf101000| XHCI no devices found \bf101000/ End thread All threads complete. Scan for option roms Attempting to init PCI bdf 00:00.0 (vd 1022:1410) Attempting to map option rom on dev 00:00.0 Option rom sizing returned 0 0 Attempting to init PCI bdf 00:01.1 (vd 1002:9902) Attempting to map option rom on dev 00:01.1 Option rom sizing returned 0 0 Attempting to init PCI bdf 00:10.0 (vd 1022:7812) Attempting to map option rom on dev 00:10.0 Option rom sizing returned 0 0 Attempting to init PCI bdf 00:10.1 (vd 1022:7812) Attempting to map option rom on dev 00:10.1 Option rom sizing returned 0 0 Attempting to init PCI bdf 00:11.0 (vd 1022:7801) Attempting to map option rom on dev 00:11.0 Option rom sizing returned 0 0 Attempting to init PCI bdf 00:12.0 (vd 1022:7807) Attempting to map option rom on dev 00:12.0 Option rom sizing returned 0 0 Attempting to init PCI bdf 00:12.2 (vd 1022:7808) Attempting to map option rom on dev 00:12.2 Option rom sizing returned 0 0 Attempting to init PCI bdf 00:13.0 (vd 1022:7807) Attempting to map option rom on dev 00:13.0 Option rom sizing returned 0 0 Attempting to init PCI bdf 00:13.2 (vd 1022:7808) Attempting to map option rom on dev 00:13.2 Option rom sizing returned 0 0 Attempting to init PCI bdf 00:14.0 (vd 1022:780b) Attempting to map option rom on dev 00:14.0 Option rom sizing returned 0 0 Attempting to init PCI bdf 00:14.2 (vd 1022:780d) Attempting to map option rom on dev 00:14.2 Option rom sizing returned 0 0 Attempting to init PCI bdf 00:14.3 (vd 1022:780e) Attempting to map option rom on dev 00:14.3 Option rom sizing returned 0 0 Attempting to init PCI bdf 00:14.4 (vd 1022:780f) Attempting to map option rom on dev 00:14.4 Skipping non-normal pci device (type=81) Attempting to init PCI bdf 00:14.5 (vd 1022:7809) Attempting to map option rom on dev 00:14.5 Option rom sizing returned 0 0 Attempting to init PCI bdf 00:14.7 (vd 1022:7806) Attempting to map option rom on dev 00:14.7 Option rom sizing returned 0 0 Attempting to init PCI bdf 00:15.0 (vd 1022:43a0) Attempting to map option rom on dev 00:15.0 Skipping non-normal pci device (type=81) Attempting to init PCI bdf 00:15.1 (vd 1022:43a1) Attempting to map option rom on dev 00:15.1 Skipping non-normal pci device (type=81) Attempting to init PCI bdf 00:18.0 (vd 1022:1400) Attempting to map option rom on dev 00:18.0 Option rom sizing returned 0 0 Attempting to init PCI bdf 00:18.1 (vd 1022:1401) Attempting to map option rom on dev 00:18.1 Option rom sizing returned 0 0 Attempting to init PCI bdf 00:18.2 (vd 1022:1402) Attempting to map option rom on dev 00:18.2 Option rom sizing returned 0 0 Attempting to init PCI bdf 00:18.3 (vd 1022:1403) Attempting to map option rom on dev 00:18.3 Option rom sizing returned 0 0 Attempting to init PCI bdf 00:18.4 (vd 1022:1404) Attempting to map option rom on dev 00:18.4 Option rom sizing returned 0 0 Attempting to init PCI bdf 00:18.5 (vd 1022:1405) Attempting to map option rom on dev 00:18.5 Option rom sizing returned 0 0 Attempting to init PCI bdf 03:00.0 (vd 10ec:8168) Attempting to map option rom on dev 03:00.0 Option rom sizing returned 0 0 Press F12 for boot menu. Checking for bootsplash Searching bootorder for: HALT Mapping hd drive 0x000f4840 to 0 drive 0x000f4840: PCHS=16383/16/63 translation=lba LCHS=1024/255/63 s=490234752 finalize PMM malloc finalize Space available for UMB: d0000-eb000, f4340-f4840 Returned 61440 bytes of ZoneHigh e820 map has 7 items: 0: 0000000000000000 - 000000000009fc00 = 1 RAM 1: 000000000009fc00 - 00000000000a0000 = 2 RESERVED 2: 00000000000f0000 - 0000000000100000 = 2 RESERVED 3: 0000000000100000 - 00000000bf11e000 = 1 RAM 4: 00000000bf11e000 - 00000000e0000000 = 2 RESERVED 5: 00000000f8000000 - 00000000fc000000 = 2 RESERVED 6: 0000000100000000 - 000000021f000000 = 1 RAM Jump to int19 enter handle_19: NULL Booting from Hard Disk... Booting from 0000:7c00 _______________________________________________ SeaBIOS mailing list [email protected] http://www.seabios.org/mailman/listinfo/seabios
