On Mon, Mar 10, 2014 at 09:49:59AM +0000, Inez G wrote: > My apologies for posting, if this is the wrong forum. > > I would like to add SeaBios to my coreboot.rom (google_stout.2817.52.0) for > a Lenovo X131e chromebook (Celeron 1007u cpu, 4 GB ram, 8 MB Winbond bios > flash chip). > > I was thinking of building seabios using the repository at > https://chromium.googlesource.com/chromiumos/third_party/seabios/+/master/src/ > and come up with a SeaBios.CBFS file as suggested in the 15th post in > https://plus.google.com/117057264318218846563/posts/FXn39JtNUAa > > Since the above article is for a Pixel chromebook, where would I > insert/merge this SeaBios file with the backup.bin file that I read from the > Winbond chip with > flashrom -p internal -r backup.bin -o backup.log > > The merged file would be "newrom.bin" which I can then hopefully write with > > flashrom -w newrom.bin > > In the linked article they suggested > flashrom -w image.rom -i RW_LEGACY > but that is for the Pixel chromebook (which has the legacy boot). > > The Lenovo X131e does not have legacy boot (so there is no RW_LEGACY > section, just "fallback/payload". > > Should I replace the "fallback/payload"section in my current backup.bin file > with the new SeaBios??
Unfortunately, I'm not familiar with the Stout or Pixel boards. You may wish to try on the coreboot list ([email protected]) as there may be more people on that list with the given hardware. -Kevin _______________________________________________ SeaBIOS mailing list [email protected] http://www.seabios.org/mailman/listinfo/seabios
