On Sat, Jun 21, 2014 at 01:15:25PM -0500, Matt DeVillier wrote: > On 6/21/2014 1:08 PM, Kevin O'Connor wrote: > > On Sat, Jun 21, 2014 at 12:20:21PM -0500, Matt DeVillier wrote: > >> I still have issues with various USB sticks not being detected at > >> boot due to the xhci_event_wait() call in xhci_cmd_submit() which > >> still has a timeout of 1000ms (vs 5000 for the ones affected by this > >> patch). Manually setting it to 5000 fixes the issues with all the > >> USB flash devices I've tested (which had a problem at 1000ms) > > Thanks Matt. Can you post the SeaBIOS log with one of these devices? > > Can do - what would you like the logging level set to? Currently > have it set to 3, which produces the following: > > xhci_hub_reset port #2: 0x00020ae1, powered, pls 7, speed 2 [Low] > XHCI port #2: 0x00200a03, powered, enabled, pls 0, speed 2 [Low] > set_address 0x000ef720 > xhci_alloc_pipe: usbdev 0x7f7378d0, ring 0x7f781b00, slotid 0, epid 1 > xhci_cmd_enable_slot: > xhci_process_events: status change port #2 > xhci_process_events: status change port #3 > xhci_process_events: status change port #4 > xhci_process_events: status change port #2 > xhci_alloc_pipe: enable slot: got slotid 1 > xhci_cmd_address_device: slotid 1 > xhci_update_pipe: usbdev 0x7f7378d0, ring 0x7f781b00, slotid 1, epid 1 > config_usb: 0x7f781c20 > device rev=0110 cls=00 sub=00 proto=00 size=8 > xhci_update_pipe: usbdev 0x7f7378d0, ring 0x7f781b00, slotid 1, epid 1 > WARNING - Timeout at xhci_event_wait:394! > xhci_control: control xfer failed (cc -1)
The above is fine. Can you also post 'lsusb -t' and 'lsusb -v' output for the device? I'll take a look later tonight. -Kevin _______________________________________________ SeaBIOS mailing list [email protected] http://www.seabios.org/mailman/listinfo/seabios
