Hi Kevin. I tried your patch and it works just fine for me. I made a test with a baytrail based board and the earlier mentioned USB-Hub. Thanks a lot for the really fast replay, great support!
Werner > Gesendet: Mittwoch, 17. Dezember 2014 um 14:14 Uhr > Von: "Kevin O'Connor" <[email protected]> > An: "Paul Menzel" <[email protected]> > Cc: [email protected], "Werner Zeh" <[email protected]> > Betreff: Re: [SeaBIOS] [PATCH] usb: Update USB hub code to support super > speed hubs > > On Tue, Dec 16, 2014 at 11:06:29PM +0100, Paul Menzel wrote: > > Dear Kevin, > > > > thank you for the patch! I am adding Werner to CC. > > > > The patch from this email was identical to the patch I sent the other > day. > > > Am Montag, den 15.12.2014, 21:47 -0500 schrieb Kevin O'Connor: > > > Super speed hubs (usb3 spec) have specific initialization > > > requirements. Add the code necessary to detect and initialize these > > > hubs. > > > > Could you please add how you tested this? For example the board, the hub > > and what you booted from it for example. > > I used an Anker 4 port usb3.0 hub, which I tested with an ADATA 16GB > usb3.0 flash drive on both my Acer c720 and Asrock e350m1-usb3. > > If you're requesting that info be in the commit message - I don't > think that level of detail is required there. > > -Kevin > _______________________________________________ SeaBIOS mailing list [email protected] http://www.seabios.org/mailman/listinfo/seabios
