On Wed, Dec 31, 2014 at 07:57:21PM -0500, Kevin O'Connor wrote: > This series refactors parts of the internal USB driver code interface. > It merges the ?hci_send_bulk() and ?hci_send_control() functions into > one function ?hci_send_pipe(). The control and bulk transmission > functions were similar, but often had slightly different > implementations and quirks. Unifying them reduces the overall code > size. It also makes it easier to issue control commands at run-time, > which should make it easier for future enhancements (such as keyboard > led control). > > I tested this on qemu and with a bunch of devices on my c720 and > e350m1. However, I don't have a uhci board readily available. I'll > have to dust off my via board and see if it still works. If others > can run some tests that would be appreciated. > > In the process of testing this series, I found that USB3 hubs aren't > working that great - I sometimes get timeout messages on my e350m1 > (though all functionality still works), and usb3 hubs aren't working > on my c720. This does not look to be a regression though. (It does > seem that USB3 hubs still need more work though). > > This series is also available at: > https://github.com/KevinOConnor/seabios/tree/testing
FYI, I pushed this series (with a few changes to it) to the main repo. -Kevin _______________________________________________ SeaBIOS mailing list [email protected] http://www.seabios.org/mailman/listinfo/seabios
