On Mon, Nov 30, 2015 at 04:47:29PM +0000, edward wandasiewicz wrote: > I started over, as I forgot which device was in which port. > > It seem's like a race condition, as I managed to get a USB device > detected twice with JohnLewis RW_LEGACY as well now, although it > doesn't happen very frequently. I pressed Ctrl-L and ESC with not much > pause and got a double device detection.
To confirm, the "double device" is an error right - there aren't actually two of these devices in the machine? Looks like two separate issues are occurring - the Philips drive is being detected as both a high speed device and as a super speed device. I need a log with CONFIG_DEBUG_LEVEL=5 to diagnose that. The second issue appears to be a USB_TRANSACTION_ERROR response from the set_address command. I think the controller may just be a bit too picky on stall responses from devices in that situation. I've put up a patch to try and work around that in the repo at: https://github.com/KevinOConnor/seabios/tree/testing Are you able to compile SeaBIOS from source and install it on your Samus? -Kevin _______________________________________________ SeaBIOS mailing list SeaBIOS@seabios.org http://www.seabios.org/mailman/listinfo/seabios
