On Wed, Jan 4, 2017 at 4:52 PM, Kevin O'Connor <[email protected]> wrote:
> On Wed, Jan 04, 2017 at 03:57:33PM +0200, Евгени Димитров wrote: > > Hi, > > > > I'm testing Coreboot with SeaBIOS as payload on my old Alix.2C2. When > > trying to boot from an USB device I get the following error: > > > > Searching bootorder for: /pci@i0cf8/usb@f,5/storage@2/*@0/*@0,0 > > Searching bootorder for: /pci@i0cf8/usb@f,5/usb-*@2 > > ehci_send_pipe qh=0x000ecf00 dir=0 data=0x00006cf9 size=31 > > ehci_send_pipe qh=0x000ecf80 dir=128 data=0x00006dc4 size=36 > > ehci_send_pipe qh=0x000ecf80 dir=128 data=0x00006cec size=13 > > WARNING - Timeout at ehci_wait_td:516! > > ehci pipe=0x000ecf80 cur=00000000 tok=00000000 next=6b40 td=0x00006b40 > > status=d0d80 > > USB transmission failed > > Unable to configure USB MSC drive. > > phys_free f6030 (detail=0x0f7688a0) > > Unable to configure USB MSC device. > > Did you disable threads in seabios (either via the kconfig option or > via the /etc/threads runtime option)? It's not recommended to disable > threads, and the USB code is less capable of handling timeouts when > threads are disabled. Can you retry (and send the log) with threads > enabled. > > If that fails, can you also try disabling CONFIG_USB_EHCI in Kconfig > and send that log as well. > > -Kevin > I get the same error with threads enabled. Disabling ehci did not help either. Logs are attached as requested.
SeaBIOS (version rel-1.10.0-10-g9332965) BUILD: gcc: (coreboot toolchain v1.43 August 31st, 2016) 5.3.0 binutils: (GNU Binutils) 2.26.1 Found coreboot cbmem console @ f7be000 Found mainboard PC Engines ALIX.2C malloc preinit Add to e820 map: 000a0000 00050000 -1 Add to e820 map: 000f0000 00010000 2 Add to e820 map: 0f774000 00040000 2 phys_alloc zone=0x000ed650 size=42752 align=20 ret=f769860 (detail=0x0f769830) Relocating init from 0x000e2fe0 to 0x0f769860 (size 42752) malloc init Found CBFS header at 0xfff80138 phys_alloc zone=0x0f773ed0 size=156 align=10 ret=f769730 (detail=0x0f769700) Add romfile: cbfs master header (size=32) phys_alloc zone=0x0f773ed0 size=156 align=10 ret=f769660 (detail=0x0f769630) Add romfile: fallback/romstage (size=17764) phys_alloc zone=0x0f773ed0 size=156 align=10 ret=f769590 (detail=0x0f769560) Add romfile: fallback/ramstage (size=37318) phys_alloc zone=0x0f773ed0 size=156 align=10 ret=f7694c0 (detail=0x0f769490) Add romfile: config (size=249) phys_alloc zone=0x0f773ed0 size=156 align=10 ret=f7693f0 (detail=0x0f7693c0) Add romfile: revision (size=580) phys_alloc zone=0x0f773ed0 size=156 align=10 ret=f769320 (detail=0x0f7692f0) Add romfile: fallback/payload (size=63807) phys_alloc zone=0x0f773ed0 size=156 align=10 ret=f769250 (detail=0x0f769220) Add romfile: payload_config (size=1574) phys_alloc zone=0x0f773ed0 size=156 align=10 ret=f769180 (detail=0x0f769150) Add romfile: payload_revision (size=239) phys_alloc zone=0x0f773ed0 size=156 align=10 ret=f7690b0 (detail=0x0f769080) Add romfile: vsa (size=57532) phys_alloc zone=0x0f773ed0 size=156 align=10 ret=f768fe0 (detail=0x0f768fb0) Add romfile: vgaroms/sgabios.bin (size=4096) phys_alloc zone=0x0f773ed0 size=156 align=10 ret=f768f10 (detail=0x0f768ee0) Add romfile: etc/screen-and-debug (size=8) phys_alloc zone=0x0f773ed0 size=156 align=10 ret=f768e40 (detail=0x0f768e10) Add romfile: etc/usb-time-sigatt (size=8) phys_alloc zone=0x0f773ed0 size=156 align=10 ret=f768d70 (detail=0x0f768d40) Add romfile: (size=338968) phys_alloc zone=0x0f773ed0 size=156 align=10 ret=f768ca0 (detail=0x0f768c70) Add romfile: bootblock (size=768) multiboot: eax=0, ebx=0 init ivt init bda Add to e820 map: 0009fc00 00000400 2 init bios32 init PMM init PNPBIOS table init keyboard init mouse init pic math cp init PCI probe phys_alloc zone=0x0f773ed0 size=32 align=10 ret=f768c50 (detail=0x0f768c20) PCI device 00:01.0 (vd=1022:2080 c=0600) phys_alloc zone=0x0f773ed0 size=32 align=10 ret=f768c00 (detail=0x0f768bd0) PCI device 00:01.2 (vd=1022:2082 c=1010) phys_alloc zone=0x0f773ed0 size=32 align=10 ret=f768bb0 (detail=0x0f768b80) PCI device 00:09.0 (vd=1106:3053 c=0200) phys_alloc zone=0x0f773ed0 size=32 align=10 ret=f768b60 (detail=0x0f768b30) PCI device 00:0b.0 (vd=1006:3053 c=0200) phys_alloc zone=0x0f773ed0 size=32 align=10 ret=f768b10 (detail=0x0f768ae0) PCI device 00:0f.0 (vd=1022:2090 c=0601) phys_alloc zone=0x0f773ed0 size=32 align=10 ret=f768ac0 (detail=0x0f768a90) PCI device 00:0f.2 (vd=1022:209a c=0101) phys_alloc zone=0x0f773ed0 size=32 align=10 ret=f768a70 (detail=0x0f768a40) PCI device 00:0f.4 (vd=1022:2094 c=0c03) phys_alloc zone=0x0f773ed0 size=32 align=10 ret=f768a20 (detail=0x0f7689f0) PCI device 00:0f.5 (vd=1022:2095 c=0c03) Found 8 PCI devices (max PCI bus is 00) Relocating coreboot bios tables phys_alloc zone=0x0f773ed8 size=31 align=10 ret=f6020 (detail=0x0f7689c0) Copying SMBIOS entry point from 0x0f7b4000 to 0x000f6020 rsdp=0x00000000 tsc calibrate start=1760251057 end=1761106398 diff=855341 CPU Mhz=498 init timer Scan for VGA option rom Copying data 8@0xfffad038 to 8@0x00006ed4 Copying data 4096@0xfffabfc8 to 4096@0x000c0000 Checking rom 0x000c0000 (sig aa55 size 8) Running option rom at c000:0003 Google, Inc. Serial Graphics Adapter 01/04/17 SGABIOS $Id$ (iddqd@unknown) Wed Jan 4 08:37:21 UTC 2017 Term: 195x50 4 0 Turning on vga text mode console SeaBIOS (version rel-1.10.0-10-g9332965) init usb Copying data 8@0xfffad078 to 8@0x00006ebc phys_alloc zone=0x0f773ed0 size=32 align=10 ret=f7689a0 (detail=0x0f768970) EHCI init on dev 00:0f.5 (regs=0xfe017010) phys_alloc zone=0x0f773ed0 size=4096 align=1000 ret=f767000 (detail=0x0f768940) /0f767000\ Start thread |0f767000| phys_alloc zone=0x0f773edc size=4096 align=1000 ret=f7b3000 (detail=0x0f768910) |0f767000| phys_alloc zone=0x0f773edc size=68 align=80 ret=f7b2f80 (detail=0x0f7688e0) |0f767000| phys_alloc zone=0x0f773edc size=68 align=80 ret=f7b2f00 (detail=0x0f7688b0) phys_alloc zone=0x0f773ed0 size=20 align=10 ret=f768890 (detail=0x0f768860) OHCI init on dev 00:0f.4 (regs=0xfe016000) phys_alloc zone=0x0f773ed0 size=4096 align=1000 ret=f766000 (detail=0x0f768830) /0f766000\ Start thread |0f766000| phys_alloc zone=0x0f773edc size=256 align=100 ret=f7b2e00 (detail=0x0f768800) |0f766000| phys_alloc zone=0x0f773edc size=16 align=10 ret=f7b2ff0 (detail=0x0f7687d0) |0f767000| phys_alloc zone=0x0f773ed0 size=28 align=10 ret=f7687b0 (detail=0x0f768780) |0f767000| phys_alloc zone=0x0f773ed0 size=4096 align=1000 ret=f765000 (detail=0x0f768750) /0f765000\ Start thread init ps2port phys_alloc zone=0x0f773ed0 size=4096 align=1000 ret=f764000 (detail=0x0f768720) /0f764000\ Start thread |0f764000| i8042_flush |0f764000| i8042 flushed ff (status=ff) |0f764000| i8042 flushed ff (status=ff) |0f764000| i8042 flushed ff (status=ff) |0f764000| i8042 flushed ff (status=ff) |0f764000| i8042 flushed ff (status=ff) |0f764000| i8042 flushed ff (status=ff) |0f764000| i8042 flushed ff (status=ff) |0f764000| i8042 flushed ff (status=ff) |0f764000| i8042 flushed ff (status=ff) |0f764000| i8042 flushed ff (status=ff) |0f764000| i8042 flushed ff (status=ff) |0f764000| i8042 flushed ff (status=ff) |0f764000| i8042 flushed ff (status=ff) |0f764000| i8042 flushed ff (status=ff) |0f764000| i8042 flushed ff (status=ff) |0f764000| i8042 flushed ff (status=ff) |0f764000| WARNING - Timeout at i8042_flush:71! \0f764000/ End thread phys_free f764000 (detail=0x0f768720) |0f767000| phys_alloc zone=0x0f773ed0 size=28 align=10 ret=f768730 (detail=0x0f768700) |0f767000| phys_alloc zone=0x0f773ed0 size=4096 align=1000 ret=f764000 (detail=0x0f7686d0) /0f764000\ Start thread init floppy drives init hard drives phys_alloc zone=0x0f773ed8 size=20 align=10 ret=f6000 (detail=0x0f7686a0) ATA controller 1 at 1f0/3f4/0 (irq 14 dev 7a) phys_alloc zone=0x0f773ed0 size=4096 align=1000 ret=f763000 (detail=0x0f768670) /0f763000\ Start thread |0f763000| powerup iobase=1f0 st=0 |0f763000| powerup iobase=1f0 st=20 |0f763000| ata_detect ata0-0: sc=2a sn=2a dh=20 |0f763000| powerup iobase=1f0 st=2a |0f763000| powerup iobase=1f0 st=30 |0f763000| ata_detect ata0-1: sc=2a sn=2a dh=30 \0f763000/ End thread phys_free f763000 (detail=0x0f768670) |0f766000| phys_alloc zone=0x0f773ed0 size=28 align=10 ret=f768680 (detail=0x0f768650) |0f766000| phys_alloc zone=0x0f773ed0 size=4096 align=1000 ret=f763000 (detail=0x0f768620) /0f763000\ Start thread |0f767000| phys_alloc zone=0x0f773ed0 size=28 align=10 ret=f768600 (detail=0x0f7685d0) |0f767000| phys_alloc zone=0x0f773ed0 size=4096 align=1000 ret=f762000 (detail=0x0f7685a0) /0f762000\ Start thread |0f765000| set_address 0x0f7689a0 phys_alloc zone=0x0f773ed8 size=20 align=10 ret=f5fe0 (detail=0x0f768570) ATA controller 2 at 170/374/0 (irq 15 dev 7a) phys_alloc zone=0x0f773ed0 size=4096 align=1000 ret=f761000 (detail=0x0f768540) /0f761000\ Start thread |0f761000| powerup IDE floating |0f761000| powerup IDE floating |0f761000| ata_detect ata1-0: sc=ff sn=ff dh=ff |0f761000| powerup IDE floating |0f761000| powerup IDE floating |0f761000| ata_detect ata1-1: sc=ff sn=ff dh=ff \0f761000/ End thread phys_free f761000 (detail=0x0f768540) |0f766000| phys_alloc zone=0x0f773ed0 size=28 align=10 ret=f768550 (detail=0x0f768520) |0f766000| phys_alloc zone=0x0f773ed0 size=4096 align=1000 ret=f761000 (detail=0x0f7684f0) /0f761000\ Start thread |0f767000| phys_alloc zone=0x0f773ed0 size=28 align=10 ret=f7684d0 (detail=0x0f7684a0) |0f767000| phys_alloc zone=0x0f773ed0 size=4096 align=1000 ret=f760000 (detail=0x0f768470) /0f760000\ Start thread |0f765000| ehci_alloc_async_pipe 0x0f7689a0 0 |0f765000| phys_alloc zone=0x0f773ed0 size=92 align=80 ret=f768400 (detail=0x0f7683d0) |0f765000| ehci_send_pipe qh=0x0f768400 dir=0 data=0x00000000 size=0 init ahci init megasas init lpt Found 0 lpt ports init serial Found 2 serial ports |0f766000| phys_alloc zone=0x0f773ed0 size=28 align=10 ret=f7683b0 (detail=0x0f768380) |0f766000| phys_alloc zone=0x0f773ed0 size=4096 align=1000 ret=f75f000 (detail=0x0f768350) /0f75f000\ Start thread |0f766000| phys_alloc zone=0x0f773ed0 size=28 align=10 ret=f768330 (detail=0x0f768300) |0f766000| phys_alloc zone=0x0f773ed0 size=4096 align=1000 ret=f75e000 (detail=0x0f7682d0) /0f75e000\ Start thread |0f765000| ehci_alloc_async_pipe 0x0f7689a0 0 |0f765000| config_usb: 0x0f768450 |0f765000| ehci_send_pipe qh=0x0f768400 dir=128 data=0x0f765fb6 size=8 |0f765000| device rev=0200 cls=00 sub=00 proto=00 size=64 |0f765000| ehci_alloc_async_pipe 0x0f7689a0 0 |0f765000| ehci_send_pipe qh=0x0f768400 dir=128 data=0x0f765fc8 size=9 |0f765000| phys_alloc zone=0x0f773ed0 size=32 align=10 ret=f7682b0 (detail=0x0f768280) |0f765000| ehci_send_pipe qh=0x0f768400 dir=128 data=0x0f7682b0 size=32 |0f765000| ehci_send_pipe qh=0x0f768400 dir=0 data=0x00000000 size=0 |0f765000| ehci_alloc_async_pipe 0x0f7689a0 2 |0f765000| phys_alloc zone=0x0f773ee0 size=92 align=80 ret=ecd80 (detail=0x0f768250) |0f765000| ehci_alloc_async_pipe 0x0f7689a0 2 |0f765000| phys_alloc zone=0x0f773ee0 size=92 align=80 ret=ecd00 (detail=0x0f768220) |0f765000| ehci_send_pipe qh=0x0f768400 dir=128 data=0x0f765fae size=1 |0f765000| phys_alloc zone=0x0f773ed8 size=48 align=10 ret=f5fb0 (detail=0x0f7681f0) |0f765000| Searching bootorder for: /pci@i0cf8/usb@f,5/storage@1/*@0/*@0,0 |0f765000| Searching bootorder for: /pci@i0cf8/usb@f,5/usb-*@1 |0f765000| ehci_send_pipe qh=0x000ecd00 dir=0 data=0x0f765e81 size=31 |0f765000| ehci_send_pipe qh=0x000ecd80 dir=128 data=0x0f765f4c size=36 |0f765000| ehci_send_pipe qh=0x000ecd80 dir=128 data=0x0f765e74 size=13 |0f760000| phys_free f7684d0 (detail=0x0f7684a0) \0f760000/ End thread phys_free f760000 (detail=0x0f768470) |0f762000| phys_free f768600 (detail=0x0f7685d0) \0f762000/ End thread phys_free f762000 (detail=0x0f7685a0) |0f764000| phys_free f768730 (detail=0x0f768700) \0f764000/ End thread phys_free f764000 (detail=0x0f7686d0) |0f75e000| phys_free f768330 (detail=0x0f768300) \0f75e000/ End thread phys_free f75e000 (detail=0x0f7682d0) |0f75f000| phys_free f7683b0 (detail=0x0f768380) \0f75f000/ End thread phys_free f75f000 (detail=0x0f768350) |0f761000| phys_free f768550 (detail=0x0f768520) \0f761000/ End thread phys_free f761000 (detail=0x0f7684f0) |0f763000| phys_free f768680 (detail=0x0f768650) \0f763000/ End thread phys_free f763000 (detail=0x0f768620) |0f766000| ohci_free_pipes 0x0f768890 |0f766000| phys_free f7b2e00 (detail=0x0f768800) |0f766000| phys_free f7b2ff0 (detail=0x0f7687d0) \0f766000/ End thread phys_free f766000 (detail=0x0f768830) |0f765000| WARNING - Timeout at ehci_wait_td:516! |0f765000| ehci pipe=0x000ecd80 cur=00000000 tok=00000000 next=f765cc0 td=0x0f765cc0 status=d0d80 |0f765000| USB transmission failed |0f765000| Unable to configure USB MSC drive. |0f765000| phys_free f5fb0 (detail=0x0f7681f0) |0f765000| phys_alloc zone=0x0f773ed8 size=48 align=10 ret=f5fb0 (detail=0x0f768830) |0f765000| Searching bootorder for: /pci@i0cf8/usb@f,5/storage@1/*@0/*@0,1 |0f765000| Searching bootorder for: /pci@i0cf8/usb@f,5/usb-*@1 |0f765000| ehci_send_pipe qh=0x000ecd00 dir=0 data=0x0f765e81 size=31 |0f765000| ehci_send_pipe qh=0x000ecd80 dir=128 data=0x0f765f4c size=36 |0f765000| WARNING - Timeout at ehci_wait_td:516! |0f765000| ehci pipe=0x000ecd80 cur=00000000 tok=00000000 next=f765cc0 td=0x0f765cc0 status=240d80 |0f765000| USB transmission failed |0f765000| Unable to configure USB MSC drive. |0f765000| phys_free f5fb0 (detail=0x0f768830) |0f765000| phys_alloc zone=0x0f773ed8 size=48 align=10 ret=f5fb0 (detail=0x0f768830) |0f765000| Searching bootorder for: /pci@i0cf8/usb@f,5/storage@1/*@0/*@0,2 |0f765000| Searching bootorder for: /pci@i0cf8/usb@f,5/usb-*@1 |0f765000| ehci_send_pipe qh=0x000ecd00 dir=0 data=0x0f765e81 size=31 |0f765000| ehci_send_pipe qh=0x000ecd80 dir=128 data=0x0f765f4c size=36 |0f765000| WARNING - Timeout at ehci_wait_td:516! |0f765000| ehci pipe=0x000ecd80 cur=00000000 tok=00000000 next=f765cc0 td=0x0f765cc0 status=240d80 |0f765000| USB transmission failed |0f765000| Unable to configure USB MSC drive. |0f765000| phys_free f5fb0 (detail=0x0f768830) |0f765000| phys_alloc zone=0x0f773ed8 size=48 align=10 ret=f5fb0 (detail=0x0f768830) |0f765000| Searching bootorder for: /pci@i0cf8/usb@f,5/storage@1/*@0/*@0,3 |0f765000| Searching bootorder for: /pci@i0cf8/usb@f,5/usb-*@1 |0f765000| ehci_send_pipe qh=0x000ecd00 dir=0 data=0x0f765e81 size=31 |0f765000| ehci_send_pipe qh=0x000ecd80 dir=128 data=0x0f765f4c size=36 |0f765000| WARNING - Timeout at ehci_wait_td:516! |0f765000| ehci pipe=0x000ecd80 cur=00000000 tok=00000000 next=f765cc0 td=0x0f765cc0 status=240d80 |0f765000| USB transmission failed |0f765000| Unable to configure USB MSC drive. |0f765000| phys_free f5fb0 (detail=0x0f768830) |0f765000| phys_alloc zone=0x0f773ed8 size=48 align=10 ret=f5fb0 (detail=0x0f768830) |0f765000| Searching bootorder for: /pci@i0cf8/usb@f,5/storage@1/*@0/*@0,4 |0f765000| Searching bootorder for: /pci@i0cf8/usb@f,5/usb-*@1 |0f765000| ehci_send_pipe qh=0x000ecd00 dir=0 data=0x0f765e81 size=31 |0f765000| ehci_send_pipe qh=0x000ecd80 dir=128 data=0x0f765f4c size=36 |0f765000| WARNING - Timeout at ehci_wait_td:516! |0f765000| ehci pipe=0x000ecd80 cur=00000000 tok=00000000 next=f765cc0 td=0x0f765cc0 status=240d80 |0f765000| USB transmission failed |0f765000| Unable to configure USB MSC drive. |0f765000| phys_free f5fb0 (detail=0x0f768830) |0f765000| Unable to configure USB MSC device. |0f765000| phys_free f7682b0 (detail=0x0f768280) |0f765000| phys_free f7687b0 (detail=0x0f768780) \0f765000/ End thread phys_free f765000 (detail=0x0f768750) |0f767000| ehci_free_pipes 0x0f7689a0 |0f767000| phys_free f768400 (detail=0x0f7683d0) |0f767000| phys_free ecd00 (detail=0x0f768220) |0f767000| phys_free ecd80 (detail=0x0f768250) |0f767000| phys_free f7b3000 (detail=0x0f768910) |0f767000| phys_free f7b2f80 (detail=0x0f7688e0) |0f767000| phys_free f7b2f00 (detail=0x0f7688b0) |0f767000| phys_free f7689a0 (detail=0x0f768970) \0f767000/ End thread phys_free f767000 (detail=0x0f768940) All threads complete. Scan for option roms Attempting to init PCI bdf 00:01.0 (vd 1022:2080) Attempting to map option rom on dev 00:01.0 Option rom sizing returned 0 0 Attempting to init PCI bdf 00:01.2 (vd 1022:2082) Attempting to map option rom on dev 00:01.2 Option rom sizing returned 0 0 Attempting to init PCI bdf 00:09.0 (vd 1106:3053) Attempting to map option rom on dev 00:09.0 Option rom sizing returned 0 0 Attempting to init PCI bdf 00:0b.0 (vd 1006:3053) Attempting to map option rom on dev 00:0b.0 Option rom sizing returned 0 0 Attempting to init PCI bdf 00:0f.0 (vd 1022:2090) Attempting to map option rom on dev 00:0f.0 Option rom sizing returned 0 0 Attempting to init PCI bdf 00:0f.2 (vd 1022:209a) Attempting to map option rom on dev 00:0f.2 Option rom sizing returned 0 0 Press ESC for boot menu.
SeaBIOS (version rel-1.10.0-10-g9332965) BUILD: gcc: (coreboot toolchain v1.43 August 31st, 2016) 5.3.0 binutils: (GNU Binutils) 2.26.1 Attempting to find coreboot table Found coreboot table forwarder. Now attempting to find coreboot memory map Add to e820 map: 00000000 00001000 2 Add to e820 map: 00001000 0009f000 1 Add to e820 map: 000c0000 0f6f4000 1 Add to e820 map: 0f7b4000 0002c000 2 Add to e820 map: 00000000 00004000 1 SeaBIOS (version rel-1.10.0-10-g9332965) BUILD: gcc: (coreboot toolchain v1.43 August 31st, 2016) 5.3.0 binutils: (GNU Binutils) 2.26.1 Found coreboot cbmem console @ f7be000 Found mainboard PC Engines ALIX.2C malloc preinit Add to e820 map: 000a0000 00050000 -1 Add to e820 map: 000f0000 00010000 2 Add to e820 map: 0f774000 00040000 2 phys_alloc zone=0x000edfb0 size=40928 align=20 ret=f769f80 (detail=0x0f769f50) Relocating init from 0x000e4040 to 0x0f769f80 (size 40928) malloc init Found CBFS header at 0xfff80138 phys_alloc zone=0x0f773ef0 size=156 align=10 ret=f769e50 (detail=0x0f769e20) Add romfile: cbfs master header (size=32) phys_alloc zone=0x0f773ef0 size=156 align=10 ret=f769d80 (detail=0x0f769d50) Add romfile: fallback/romstage (size=17764) phys_alloc zone=0x0f773ef0 size=156 align=10 ret=f769cb0 (detail=0x0f769c80) Add romfile: fallback/ramstage (size=37318) phys_alloc zone=0x0f773ef0 size=156 align=10 ret=f769be0 (detail=0x0f769bb0) Add romfile: config (size=249) phys_alloc zone=0x0f773ef0 size=156 align=10 ret=f769b10 (detail=0x0f769ae0) Add romfile: revision (size=580) phys_alloc zone=0x0f773ef0 size=156 align=10 ret=f769a40 (detail=0x0f769a10) Add romfile: fallback/payload (size=61869) phys_alloc zone=0x0f773ef0 size=156 align=10 ret=f769970 (detail=0x0f769940) Add romfile: payload_config (size=1585) phys_alloc zone=0x0f773ef0 size=156 align=10 ret=f7698a0 (detail=0x0f769870) Add romfile: payload_revision (size=239) phys_alloc zone=0x0f773ef0 size=156 align=10 ret=f7697d0 (detail=0x0f7697a0) Add romfile: vsa (size=57532) phys_alloc zone=0x0f773ef0 size=156 align=10 ret=f769700 (detail=0x0f7696d0) Add romfile: vgaroms/sgabios.bin (size=4096) phys_alloc zone=0x0f773ef0 size=156 align=10 ret=f769630 (detail=0x0f769600) Add romfile: etc/screen-and-debug (size=8) phys_alloc zone=0x0f773ef0 size=156 align=10 ret=f769560 (detail=0x0f769530) Add romfile: etc/usb-time-sigatt (size=8) phys_alloc zone=0x0f773ef0 size=156 align=10 ret=f769490 (detail=0x0f769460) Add romfile: (size=340888) phys_alloc zone=0x0f773ef0 size=156 align=10 ret=f7693c0 (detail=0x0f769390) Add romfile: bootblock (size=768) multiboot: eax=0, ebx=0 init ivt init bda Add to e820 map: 0009fc00 00000400 2 init bios32 init PMM init PNPBIOS table init keyboard init mouse init pic math cp init PCI probe phys_alloc zone=0x0f773ef0 size=32 align=10 ret=f769370 (detail=0x0f769340) PCI device 00:01.0 (vd=1022:2080 c=0600) phys_alloc zone=0x0f773ef0 size=32 align=10 ret=f769320 (detail=0x0f7692f0) PCI device 00:01.2 (vd=1022:2082 c=1010) phys_alloc zone=0x0f773ef0 size=32 align=10 ret=f7692d0 (detail=0x0f7692a0) PCI device 00:09.0 (vd=1106:3053 c=0200) phys_alloc zone=0x0f773ef0 size=32 align=10 ret=f769280 (detail=0x0f769250) PCI device 00:0b.0 (vd=1106:3053 c=0200) phys_alloc zone=0x0f773ef0 size=32 align=10 ret=f769230 (detail=0x0f769200) PCI device 00:0f.0 (vd=1022:2090 c=0601) phys_alloc zone=0x0f773ef0 size=32 align=10 ret=f7691e0 (detail=0x0f7691b0) PCI device 00:0f.2 (vd=1022:209a c=0101) phys_alloc zone=0x0f773ef0 size=32 align=10 ret=f769190 (detail=0x0f769160) PCI device 00:0f.4 (vd=1022:2094 c=0c03) phys_alloc zone=0x0f773ef0 size=32 align=10 ret=f769140 (detail=0x0f769110) PCI device 00:0f.5 (vd=1022:2095 c=0c03) Found 8 PCI devices (max PCI bus is 00) Relocating coreboot bios tables phys_alloc zone=0x0f773ef8 size=31 align=10 ret=f6520 (detail=0x0f7690e0) Copying SMBIOS entry point from 0x0f7b4000 to 0x000f6520 rsdp=0x00000000 tsc calibrate start=1760264573 end=1761119884 diff=855311 CPU Mhz=498 init timer Scan for VGA option rom Copying data 8@0xfffac8b8 to 8@0x00006ed4 Copying data 4096@0xfffab848 to 4096@0x000c0000 Checking rom 0x000c0000 (sig aa55 size 8) Running option rom at c000:0003 Google, Inc. Serial Graphics Adapter 01/04/17 SGABIOS $Id$ (iddqd@unknown) Wed Jan 4 08:37:21 UTC 2017 Term: 195x50 4 0 Turning on vga text mode console SeaBIOS (version rel-1.10.0-10-g9332965) init usb Copying data 8@0xfffac8f8 to 8@0x00006ebc phys_alloc zone=0x0f773ef0 size=20 align=10 ret=f7690c0 (detail=0x0f769090) OHCI init on dev 00:0f.4 (regs=0xfe016000) phys_alloc zone=0x0f773ef0 size=4096 align=1000 ret=f768000 (detail=0x0f769060) /0f768000\ Start thread |0f768000| phys_alloc zone=0x0f773efc size=256 align=100 ret=f7b3f00 (detail=0x0f769030) |0f768000| phys_alloc zone=0x0f773efc size=16 align=10 ret=f7b3ef0 (detail=0x0f769000) init ps2port phys_alloc zone=0x0f773ef0 size=4096 align=1000 ret=f767000 (detail=0x0f766fd0) /0f767000\ Start thread |0f767000| i8042_flush |0f767000| i8042 flushed ff (status=ff) |0f767000| i8042 flushed ff (status=ff) |0f767000| i8042 flushed ff (status=ff) |0f767000| i8042 flushed ff (status=ff) |0f767000| i8042 flushed ff (status=ff) |0f767000| i8042 flushed ff (status=ff) |0f767000| i8042 flushed ff (status=ff) |0f767000| i8042 flushed ff (status=ff) |0f767000| i8042 flushed ff (status=ff) |0f767000| i8042 flushed ff (status=ff) |0f767000| i8042 flushed ff (status=ff) |0f767000| i8042 flushed ff (status=ff) |0f767000| i8042 flushed ff (status=ff) |0f767000| i8042 flushed ff (status=ff) |0f767000| i8042 flushed ff (status=ff) |0f767000| i8042 flushed ff (status=ff) |0f767000| WARNING - Timeout at i8042_flush:71! \0f767000/ End thread phys_free f767000 (detail=0x0f766fd0) init floppy drives init hard drives phys_alloc zone=0x0f773ef8 size=20 align=10 ret=f6500 (detail=0x0f767fd0) ATA controller 1 at 1f0/3f4/0 (irq 14 dev 7a) phys_alloc zone=0x0f773ef0 size=4096 align=1000 ret=f766000 (detail=0x0f767fa0) /0f766000\ Start thread |0f766000| powerup iobase=1f0 st=0 |0f766000| powerup iobase=1f0 st=20 |0f766000| ata_detect ata0-0: sc=2a sn=2a dh=20 |0f766000| powerup iobase=1f0 st=2a |0f766000| powerup iobase=1f0 st=30 |0f766000| ata_detect ata0-1: sc=2a sn=2a dh=30 \0f766000/ End thread phys_free f766000 (detail=0x0f767fa0) |0f768000| phys_alloc zone=0x0f773ef0 size=28 align=10 ret=f767fb0 (detail=0x0f767f80) |0f768000| phys_alloc zone=0x0f773ef0 size=4096 align=1000 ret=f766000 (detail=0x0f767f50) /0f766000\ Start thread phys_alloc zone=0x0f773ef8 size=20 align=10 ret=f64e0 (detail=0x0f767f20) ATA controller 2 at 170/374/0 (irq 15 dev 7a) phys_alloc zone=0x0f773ef0 size=4096 align=1000 ret=f765000 (detail=0x0f767ef0) /0f765000\ Start thread |0f765000| powerup IDE floating |0f765000| powerup IDE floating |0f765000| ata_detect ata1-0: sc=ff sn=ff dh=ff |0f765000| powerup IDE floating |0f765000| powerup IDE floating |0f765000| ata_detect ata1-1: sc=ff sn=ff dh=ff \0f765000/ End thread phys_free f765000 (detail=0x0f767ef0) |0f768000| phys_alloc zone=0x0f773ef0 size=28 align=10 ret=f767f00 (detail=0x0f767ed0) |0f768000| phys_alloc zone=0x0f773ef0 size=4096 align=1000 ret=f765000 (detail=0x0f767ea0) /0f765000\ Start thread |0f766000| set_address 0x0f7690c0 init ahci init megasas init lpt Found 0 lpt ports init serial Found 2 serial ports |0f768000| phys_alloc zone=0x0f773ef0 size=28 align=10 ret=f767e80 (detail=0x0f767e50) |0f768000| phys_alloc zone=0x0f773ef0 size=4096 align=1000 ret=f764000 (detail=0x0f767e20) /0f764000\ Start thread |0f766000| ohci_alloc_async_pipe 0x0f7690c0 |0f766000| phys_alloc zone=0x0f773ef0 size=44 align=10 ret=f767df0 (detail=0x0f767dc0) |0f766000| ohci_send_pipe 0x0f767e00 |0f768000| phys_alloc zone=0x0f773ef0 size=28 align=10 ret=f767da0 (detail=0x0f767d70) |0f768000| phys_alloc zone=0x0f773ef0 size=4096 align=1000 ret=f763000 (detail=0x0f767d40) /0f763000\ Start thread |0f766000| ohci_alloc_async_pipe 0x0f7690c0 |0f766000| config_usb: 0x0f767e00 |0f766000| ohci_send_pipe 0x0f767e00 |0f766000| device rev=0200 cls=00 sub=00 proto=00 size=64 |0f766000| ohci_alloc_async_pipe 0x0f7690c0 |0f766000| ohci_send_pipe 0x0f767e00 |0f766000| phys_alloc zone=0x0f773ef0 size=32 align=10 ret=f767d20 (detail=0x0f767cf0) |0f766000| ohci_send_pipe 0x0f767e00 |0f766000| ohci_send_pipe 0x0f767e00 |0f766000| ohci_alloc_async_pipe 0x0f7690c0 |0f766000| phys_alloc zone=0x0f773f00 size=44 align=10 ret=ed750 (detail=0x0f767cc0) |0f766000| ohci_alloc_async_pipe 0x0f7690c0 |0f766000| phys_alloc zone=0x0f773f00 size=44 align=10 ret=ed720 (detail=0x0f767c90) |0f766000| ohci_send_pipe 0x0f767e00 |0f766000| phys_alloc zone=0x0f773ef8 size=48 align=10 ret=f64b0 (detail=0x0f767c60) |0f766000| Searching bootorder for: /pci@i0cf8/usb@f,4/storage@1/*@0/*@0,0 |0f766000| Searching bootorder for: /pci@i0cf8/usb@f,4/usb-*@1 |0f766000| ohci_send_pipe 0x000ed730 |0f763000| phys_free f767da0 (detail=0x0f767d70) \0f763000/ End thread phys_free f763000 (detail=0x0f767d40) |0f764000| phys_free f767e80 (detail=0x0f767e50) \0f764000/ End thread phys_free f764000 (detail=0x0f767e20) |0f765000| phys_free f767f00 (detail=0x0f767ed0) \0f765000/ End thread phys_free f765000 (detail=0x0f767ea0) |0f766000| WARNING - Timeout at wait_ed:448! |0f766000| ohci ed info=400081 tail=f766d40 head=f766d30 next=ed750 |0f766000| USB transmission failed |0f766000| Unable to configure USB MSC drive. |0f766000| phys_free f64b0 (detail=0x0f767c60) |0f766000| phys_alloc zone=0x0f773ef8 size=48 align=10 ret=f64b0 (detail=0x0f767ef0) |0f766000| Searching bootorder for: /pci@i0cf8/usb@f,4/storage@1/*@0/*@0,1 |0f766000| Searching bootorder for: /pci@i0cf8/usb@f,4/usb-*@1 |0f766000| ohci_send_pipe 0x000ed730 |0f766000| WARNING - Timeout at wait_ed:448! |0f766000| ohci ed info=400081 tail=f766d40 head=f766d30 next=ed750 |0f766000| USB transmission failed |0f766000| Unable to configure USB MSC drive. |0f766000| phys_free f64b0 (detail=0x0f767ef0) |0f766000| phys_alloc zone=0x0f773ef8 size=48 align=10 ret=f64b0 (detail=0x0f767ef0) |0f766000| Searching bootorder for: /pci@i0cf8/usb@f,4/storage@1/*@0/*@0,2 |0f766000| Searching bootorder for: /pci@i0cf8/usb@f,4/usb-*@1 |0f766000| ohci_send_pipe 0x000ed730 |0f766000| WARNING - Timeout at wait_ed:448! |0f766000| ohci ed info=400081 tail=f766d40 head=f766d30 next=ed750 |0f766000| USB transmission failed |0f766000| Unable to configure USB MSC drive. |0f766000| phys_free f64b0 (detail=0x0f767ef0) |0f766000| phys_alloc zone=0x0f773ef8 size=48 align=10 ret=f64b0 (detail=0x0f767ef0) |0f766000| Searching bootorder for: /pci@i0cf8/usb@f,4/storage@1/*@0/*@0,3 |0f766000| Searching bootorder for: /pci@i0cf8/usb@f,4/usb-*@1 |0f766000| ohci_send_pipe 0x000ed730 |0f766000| WARNING - Timeout at wait_ed:448! |0f766000| ohci ed info=400081 tail=f766d40 head=f766d30 next=ed750 |0f766000| USB transmission failed |0f766000| Unable to configure USB MSC drive. |0f766000| phys_free f64b0 (detail=0x0f767ef0) |0f766000| phys_alloc zone=0x0f773ef8 size=48 align=10 ret=f64b0 (detail=0x0f767ef0) |0f766000| Searching bootorder for: /pci@i0cf8/usb@f,4/storage@1/*@0/*@0,4 |0f766000| Searching bootorder for: /pci@i0cf8/usb@f,4/usb-*@1 |0f766000| ohci_send_pipe 0x000ed730 |0f766000| WARNING - Timeout at wait_ed:448! |0f766000| ohci ed info=400081 tail=f766d40 head=f766d30 next=ed750 |0f766000| USB transmission failed |0f766000| Unable to configure USB MSC drive. |0f766000| phys_free f64b0 (detail=0x0f767ef0) |0f766000| Unable to configure USB MSC device. |0f766000| phys_free f767d20 (detail=0x0f767cf0) |0f766000| phys_free f767fb0 (detail=0x0f767f80) \0f766000/ End thread phys_free f766000 (detail=0x0f767f50) |0f768000| ohci_free_pipes 0x0f7690c0 |0f768000| phys_free f767df0 (detail=0x0f767dc0) |0f768000| phys_free f7b3f00 (detail=0x0f769030) |0f768000| phys_free f7b3ef0 (detail=0x0f769000) \0f768000/ End thread phys_free f768000 (detail=0x0f769060) All threads complete. Scan for option roms Attempting to init PCI bdf 00:01.0 (vd 1022:2080) Attempting to map option rom on dev 00:01.0 Option rom sizing returned 0 0 Attempting to init PCI bdf 00:01.2 (vd 1022:2082) Attempting to map option rom on dev 00:01.2 Option rom sizing returned 0 0 Attempting to init PCI bdf 00:09.0 (vd 1106:3053) Attempting to map option rom on dev 00:09.0 Option rom sizing returned 0 0 Attempting to init PCI bdf 00:0b.0 (vd 1106:3053) Attempting to map option rom on dev 00:0b.0 Option rom sizing returned 0 0 Attempting to init PCI bdf 00:0f.0 (vd 1022:2090) Attempting to map option rom on dev 00:0f.0 Option rom sizing returned 0 0 Attempting to init PCI bdf 00:0f.2 (vd 1022:209a) Attempting to map option rom on dev 00:0f.2 Option rom sizing returned 0 0 Attempting to init PCI bdf 00:0f.5 (vd 1022:2095) Attempting to map option rom on dev 00:0f.5 Option rom sizing returned 0 0 Press ESC for boot menu.
_______________________________________________ SeaBIOS mailing list [email protected] https://www.coreboot.org/mailman/listinfo/seabios
