Hello biosers,
I managed to get some feedback from Kevin, on IRC, which was set debug to
8...
I began the adventure, by taking advantage of a pureos script
https://code.puri.sm/kakaroto/coreboot-files/raw/master/build_coreboot.sh
I had to make a few modifications
megadl '
https://mega.nz/#!fA03xADA!5uqZiKwNZIP1J27xHzIKVQPQaNfqxdtzKjPRxxwZMc8'
mv Intel\ CSME\ 11.0\ Firmware\ Repository\ Pack\ r50.rar
coreboot/me_11_repository.rar
comment out lines 226 and 227
cd coreboot/flashrom && CFLAGS="-Wno-error=deprecated-declarations"
make; cd -
update the librem15v3 coreboot config file, setting seabios debug from
-1 to 8
comment out the attempt to check the sha256 of the coreboot (since
debug changes sha)
the script created a coreboot rom file and claimed that it flashed the
rom
However, when I rebooted, I didn't see any extra output on the screen and
it is still hung on the Booting from Hard disk... message
Any thoughts on how I can get the debug output?
Thanks
On Wed, May 9, 2018 at 9:14 PM Philip C. <pcham...@gmail.com> wrote:
> Hello everyone!
>
> I've been having some issues with a laptop recently. My Librem 15v3 was
> bouncing along, until one day I ran into an apt-get upgrade issue. I
> attempted to fix the affected script by pointing it to the base directory
> busybox lived. The upgrade completed without any apparent issue.
>
> But, now no matter what I do, unattended boots hang on
>
> SeaBIOS (version rel-1.11.0-0-g63451fc)
> Booting from Hard Disk...
> _
>
> I have tried reinstalling the OS, using their live boot ISO. Each time, no
> matter which disk I configure (/dev/sda or /dev/nvme0n1), the install fails
> with the message
>
> Installation failed Failed to run update-initramfs on the target The exit
> code was 2
>
> I have upgraded coreboot, no joy. I have also tried manually running grub,
> from the installer, ie
>
>
> 1. mkdir /mnt/root
> 2. cryptsetup luksOpen /dev/sda3 root
> 3. mount /dev/mapper/root /mnt/root
> 4. mount /dev/sda1 /mnt/root/boot
> 5. grub-install --boot-directory=/mnt/root/boot /dev/sda
> 6. update-grub2
>
> The folks at purism/librem seem to be as confused as I am. Does anyone
> here have any insight into how I can fix this problem?
>
> Thanks!
>
_______________________________________________
SeaBIOS mailing list
SeaBIOS@seabios.org
https://mail.coreboot.org/mailman/listinfo/seabios
