On Thu, Dec 05, 2019 at 06:52:46AM +0100, Gerd Hoffmann wrote: > Hi, > > > I'm ok to use Base-Class/Sub-Class = 0x07/0x00 to filter out the PCI serial > > devices and choose the first one as the debug port. However, debug port > > needs > > to be enabled early, before seabios scans PCI bus. I think we don't want > > to scan the pci bus by ourself in src/hw/serialio.c, but it's too late to > > wait for seabios to scan the bus for us. Please advice a feasible solution. > > You've mentioned elsewhere in the thread that the serial port is mapped > to the legacy 0x3f8 ioport initially. So can we just use that before > the PCI scan happens?
The transition from 0x3f8 to an other IO address happened in EDK2 based BIOS, during the transition from PEI to DXE where the PCI bus is scanned resources are allocated. The first time BIOS calls to SeaBIOS, the IO address has already been changed to a non-0x3f8 one. > > cheers, > Gerd > _______________________________________________ SeaBIOS mailing list -- seabios@seabios.org To unsubscribe send an email to seabios-le...@seabios.org
