> Please let’s fix the root cause. Please attach the logs of coreboot with log > level `DEBUG` and SeaBIOS log level set to at least 5 by attaching the output > of `cbmem -1` from a boot where the USB device was not detected, so the > developers know about the used versions and debug messages. Please also > mention, if this happens with all USB ports and different USB storage devices > or just this one.
Thank you Paul and I have now set coreboot log level to DEBUG and SeaBIOS log level to 5 and attached the result. This is when the USB device not detected. This sometimes happens randomly not only on this USB disk but also other USB storages as well, and also not just this port. > Additionally, I believe that it should work out of the box, and Ctrl + Alt + > Del is a good enough solution in case it does not work. I have seen many time the USB works well under Linux but not detected at first code boot using SeaBIOS. It's hard to say repeatedly pressing Ctrl+Alt+Delete is a good solution, because sometimes it still doesn't appear after three times or five times of repeating these steps, then people go crazy... Mar 21, 2020, 04:58 by pmen...@molgen.mpg.de: > Dear Dalao, > > > Am 20.03.20 um 20:58 schrieb Dalao: > >> I'm using coreboot with seabios on Thinkpad T420. I found that >> sometimes USB disks do not show up on first code boot (press the >> power button), possibly due to slow on detection? If I press >> Ctrl+Alt+Delete a few times, they will appear in the list. >> >> Recently I used clonezilla for backup and I was inspired by this >> feature. Clonezilla has the following screen that it will detection >> disks periodically until it find the disk. So I wonder could seabios >> implement features like this that after I press the ESC, the list >> will update periodically? >> > > […] > > Please let’s fix the root cause. Please attach the logs of coreboot with log > level `DEBUG` and SeaBIOS log level set to at least 5 by attaching the output > of `cbmem -1` from a boot where the USB device was not detected, so the > developers know about the used versions and debug messages. Please also > mention, if this happens with all USB ports and different USB storage devices > or just this one. > > Additionally, I believe that it should work out of the box, and Ctrl + Alt + > Del is a good enough solution in case it does not work. > > > Kind regards, > > Paul >
*** Pre-CBMEM romstage console overflowed, log truncated! *** Selected CAS latency : 13T PLL busy... done in 50 us MCU frequency is set at : 1066 MHz Done dimm mapping Update PCI-E configuration space: PCI(0, 0, 0)[a0] = 0 PCI(0, 0, 0)[a4] = 2 PCI(0, 0, 0)[bc] = 82a00000 PCI(0, 0, 0)[a8] = 7d600000 PCI(0, 0, 0)[ac] = 2 PCI(0, 0, 0)[b8] = 80000000 PCI(0, 0, 0)[b0] = 80a00000 PCI(0, 0, 0)[b4] = 80800000 Done memory map Done io registers t123: 1586, 6000, 7620 ME: FW Partition Table : OK ME: Bringup Loader Failure : NO ME: Firmware Init Complete : NO ME: Manufacturing Mode : YES ME: Boot Options Present : NO ME: Update In Progress : NO ME: Current Working State : Initializing ME: Current Operation State : Bring up ME: Current Operation Mode : Debug or Disabled by AltDisableBit ME: Error Code : No Error ME: Progress Phase : BUP Phase ME: Power Management Event : Clean Moff->Mx wake ME: Progress Phase State : Check to see if straps say ME DISABLED ME: Wrong mode : 2 ME: FWS2: 0x100a0000 ME: Bist in progress: 0x0 ME: ICC Status : 0x0 ME: Invoke MEBx : 0x0 ME: CPU replaced : 0x0 ME: MBP ready : 0x0 ME: MFS failure : 0x0 ME: Warm reset req : 0x0 ME: CPU repl valid : 0x0 ME: (Reserved) : 0x0 ME: FW update req : 0x0 ME: (Reserved) : 0x0 ME: Current state : 0xa ME: Current PM event: 0x0 ME: Progress code : 0x1 Waited long enough, or CPU was not replaced, continue... PASSED! Tell ME that DRAM is ready ME: ME is reporting as disabled, so not waiting for a response. ME: FWS2: 0x100a0000 ME: Bist in progress: 0x0 ME: ICC Status : 0x0 ME: Invoke MEBx : 0x0 ME: CPU replaced : 0x0 ME: MBP ready : 0x0 ME: MFS failure : 0x0 ME: Warm reset req : 0x0 ME: CPU repl valid : 0x0 ME: (Reserved) : 0x0 ME: FW update req : 0x0 ME: (Reserved) : 0x0 ME: Current state : 0xa ME: Current PM event: 0x0 ME: Progress code : 0x1 ME: Requested BIOS Action: No DID Ack received ME: FW Partition Table : OK ME: Bringup Loader Failure : NO ME: Firmware Init Complete : NO ME: Manufacturing Mode : YES ME: Boot Options Present : NO ME: Update In Progress : NO ME: Current Working State : Initializing ME: Current Operation State : Bring up ME: Current Operation Mode : Debug or Disabled by AltDisableBit ME: Error Code : No Error ME: Progress Phase : BUP Phase ME: Power Management Event : Clean Moff->Mx wake ME: Progress Phase State : Check to see if straps say ME DISABLED memcfg DDR3 ref clock 133 MHz memcfg DDR3 clock 2128 MHz memcfg channel assignment: A: 0, B 1, C 2 memcfg channel[0] config (00620010): ECC inactive enhanced interleave mode on rank interleave on DIMMA 4096 MB width x8 dual rank, selected DIMMB 0 MB width x8 single rank memcfg channel[1] config (00620010): ECC inactive enhanced interleave mode on rank interleave on DIMMA 4096 MB width x8 dual rank, selected DIMMB 0 MB width x8 single rank CBMEM: IMD: root @ 0x7ffff000 254 entries. IMD: root @ 0x7fffec00 62 entries. External stage cache: IMD: root @ 0x803ff000 254 entries. IMD: root @ 0x803fec00 62 entries. CBMEM entry for DIMM info: 0x7fffe900 SMM Memory Map SMRAM : 0x80000000 0x800000 Subregion 0: 0x80000000 0x300000 Subregion 1: 0x80300000 0x100000 Subregion 2: 0x80400000 0x400000 MTRR Range: Start=7f800000 End=80000000 (Size 800000) MTRR Range: Start=80000000 End=80800000 (Size 800000) MTRR Range: Start=ff800000 End=0 (Size 800000) FMAP: area COREBOOT found @ 510200 (3079680 bytes) CBFS: Locating 'fallback/postcar' CBFS: Found @ offset 440c0 size 4e70 Decompressing stage fallback/postcar @ 0x7ffd2fc0 (36496 bytes) Loading module at 0x7ffd3000 with entry 0x7ffd3000. filesize: 0x4ad0 memsize: 0x8e50 Processing 209 relocs. Offset value of 0x7dfd3000 BS: romstage times (exec / console): total (unknown) / 2 ms coreboot-4.11-1632-gf762f87916 Sun Mar 15 13:39:59 UTC 2020 postcar starting (log level: 7)... usbdebug: Failed hardware init FMAP: area COREBOOT found @ 510200 (3079680 bytes) CBFS: Locating 'fallback/ramstage' CBFS: Found @ offset 1afc0 size 17a73 Decompressing stage fallback/ramstage @ 0x7ff8bfc0 (285368 bytes) Loading module at 0x7ff8c000 with entry 0x7ff8c000. filesize: 0x30978 memsize: 0x45a78 Processing 3429 relocs. Offset value of 0x7f18c000 BS: postcar times (exec / console): total (unknown) / 0 ms coreboot-4.11-1632-gf762f87916 Sun Mar 15 13:39:59 UTC 2020 ramstage starting (log level: 7)... usbdebug: Failed hardware init Normal boot Enumerating buses... Root Device scanning... CPU_CLUSTER: 0 enabled DOMAIN: 0000 enabled DOMAIN: 0000 scanning... PCI: pci_scan_bus for bus 00 PCI: 00:00.0 [8086/0154] enabled PCI: Static device PCI: 00:01.0 not found, disabling it. PCI: 00:02.0 [8086/0166] enabled PCI: 00:04.0 [8086/0153] enabled PCI: 00:16.0: Disabling device PCI: 00:16.0 [8086/1c3a] disabled PCI: 00:16.1: Disabling device PCI: 00:16.2: Disabling device PCI: 00:16.3: Disabling device PCI: 00:19.0 [8086/1502] enabled PCI: 00:1a.0 [8086/1c2d] enabled PCI: 00:1b.0 [8086/1c20] enabled PCH: PCIe Root Port coalescing is enabled PCI: 00:1c.0: Disabling device PCI: 00:1c.0: check set enabled PCI: 00:1c.0 [8086/1c10] disabled PCH: Remap PCIe function 1 to 0 PCI: 00:1c.1 [8086/1c12] enabled PCI: 00:1c.2: Disabling device PCI: 00:1c.2 [8086/1c14] disabled PCH: Remap PCIe function 3 to 0 PCI: 00:1c.3 [8086/1c16] enabled PCH: Remap PCIe function 4 to 0 PCI: 00:1c.4 [8086/1c18] enabled PCI: 00:1c.5: Disabling device PCI: 00:1c.5 [8086/1c1a] disabled PCI: 00:1c.6: Disabling device PCI: 00:1c.6 [8086/1c1c] disabled PCI: 00:1c.7: Disabling device PCH: PCIe map 1c.0 -> 1c.4 PCH: PCIe map 1c.1 -> 1c.0 PCH: PCIe map 1c.3 -> 1c.1 PCH: PCIe map 1c.4 -> 1c.3 PCI: 00:1d.0 [8086/1c26] enabled PCI: 00:1e.0: Disabling device PCI: 00:1e.0 [8086/2448] disabled PCI: 00:1f.0 [8086/1c4f] enabled PCI: 00:1f.2 [8086/1c01] enabled PCI: 00:1f.3 [8086/1c22] enabled PCI: 00:1f.5: Disabling device PCI: 00:1f.5 [8086/1c09] disabled No operations PCI: 00:1f.6 [8086/1c24] enabled PCI: Leftover static devices: PCI: 00:01.0 PCI: 00:16.1 PCI: 00:16.2 PCI: 00:16.3 PCI: 00:1c.7 PCI: Check your devicetree.cb. PCI: 00:1c.0 scanning... PCI: pci_scan_bus for bus 01 PCI: 01:00.0 [168c/002a] enabled Enabling Common Clock Configuration PCIE CLK PM is not supported by endpoint ASPM: Enabled L1 PCIe: Max_Payload_Size adjusted to 128 Failed to enable LTR for dev = PCI: 01:00.0 scan_bus: bus PCI: 00:1c.0 finished in 0 msecs PCI: 00:1c.1 scanning... PCI: pci_scan_bus for bus 02 PCI: 02:00.0 [1912/0015] enabled Enabling Common Clock Configuration ASPM: Enabled L0s and L1 PCIe: Max_Payload_Size adjusted to 128 scan_bus: bus PCI: 00:1c.1 finished in 0 msecs PCI: 00:1c.3 scanning... PCI: pci_scan_bus for bus 03 PCI: 03:00.0 [1180/e823] enabled Enabling Common Clock Configuration ASPM: Enabled L0s and L1 PCIe: Max_Payload_Size adjusted to 128 Failed to enable LTR for dev = PCI: 03:00.0 scan_bus: bus PCI: 00:1c.3 finished in 0 msecs PCI: 00:1f.0 scanning... PMH7: ID 04 Revision 01 PNP: 00ff.1 enabled PNP: 0c31.0 enabled H8: EC Firmware ID 83HT30WW-3.20, Version 0.01C No CMOS option 'low_battery_beep'. H8: BDC installed H8: WWAN detection not implemented. Assuming WWAN installed PNP: 00ff.2 enabled Hybrid graphics: Not installed PNP: 00ff.f disabled scan_bus: bus PCI: 00:1f.0 finished in 5 msecs PCI: 00:1f.3 scanning... bus: PCI: 00:1f.3[0]->I2C: 01:54 enabled bus: PCI: 00:1f.3[0]->I2C: 01:55 enabled bus: PCI: 00:1f.3[0]->I2C: 01:56 enabled bus: PCI: 00:1f.3[0]->I2C: 01:57 enabled bus: PCI: 00:1f.3[0]->I2C: 01:5c enabled bus: PCI: 00:1f.3[0]->I2C: 01:5d enabled bus: PCI: 00:1f.3[0]->I2C: 01:5e enabled bus: PCI: 00:1f.3[0]->I2C: 01:5f enabled scan_bus: bus PCI: 00:1f.3 finished in 0 msecs scan_bus: bus DOMAIN: 0000 finished in 6 msecs scan_bus: bus Root Device finished in 6 msecs done BS: BS_DEV_ENUMERATE run times (exec / console): 7 / 0 ms FMAP: area RW_MRC_CACHE found @ 500000 (65536 bytes) MRC: No data in cbmem for 'RW_MRC_CACHE'. found VGA at PCI: 00:02.0 Setting up VGA for PCI: 00:02.0 Setting PCI_BRIDGE_CTL_VGA for bridge DOMAIN: 0000 Setting PCI_BRIDGE_CTL_VGA for bridge Root Device Allocating resources... Reading resources... Adding PCIe enhanced config space BAR 0xf0000000-0xf4000000. PCI: 00:1a.0 EHCI BAR hook registered More than one caller of pci_ehci_read_resources from PCI: 00:1d.0 PNP: 00ff.1 missing read_resources PNP: 00ff.2 missing read_resources Done reading resources. skipping PNP: 00ff.2@60 fixed resource, size=0! skipping PNP: 00ff.2@62 fixed resource, size=0! skipping PNP: 00ff.2@64 fixed resource, size=0! skipping PNP: 00ff.2@66 fixed resource, size=0! Setting resources... TOUUD 0x27d600000 TOLUD 0x82a00000 TOM 0x200000000 MEBASE 0x7ffff00000 IGD decoded, subtracting 32M UMA and 2M GTT TSEG base 0x80000000 size 8M Available memory below 4GB: 2048M Available memory above 4GB: 6102M PCI: 00:02.0 10 <- [0x00e1400000 - 0x00e17fffff] size 0x00400000 gran 0x16 mem64 PCI: 00:02.0 18 <- [0x00d0000000 - 0x00dfffffff] size 0x10000000 gran 0x1c prefmem64 PCI: 00:02.0 20 <- [0x0000003000 - 0x000000303f] size 0x00000040 gran 0x06 io PCI: 00:04.0 10 <- [0x00e1a20000 - 0x00e1a27fff] size 0x00008000 gran 0x0f mem64 PCI: 00:19.0 10 <- [0x00e1a00000 - 0x00e1a1ffff] size 0x00020000 gran 0x11 mem PCI: 00:19.0 14 <- [0x00e1a2c000 - 0x00e1a2cfff] size 0x00001000 gran 0x0c mem PCI: 00:19.0 18 <- [0x0000003040 - 0x000000305f] size 0x00000020 gran 0x05 io PCI: 00:1a.0 EHCI Debug Port hook triggered PCI: 00:1a.0 10 <- [0x00e1a2f000 - 0x00e1a2f3ff] size 0x00000400 gran 0x0a mem PCI: 00:1a.0 10 <- [0x00e1a2f000 - 0x00e1a2f3ff] size 0x00000400 gran 0x0a mem PCI: 00:1a.0 EHCI Debug Port relocated PCI: 00:1b.0 10 <- [0x00e1a28000 - 0x00e1a2bfff] size 0x00004000 gran 0x0e mem64 PCI: 00:1c.0 1c <- [0x000000ffff - 0x000000fffe] size 0x00000000 gran 0x0c bus 01 io PCI: 00:1c.0 24 <- [0x00efffffff - 0x00effffffe] size 0x00000000 gran 0x14 bus 01 prefmem PCI: 00:1c.0 20 <- [0x00e1800000 - 0x00e18fffff] size 0x00100000 gran 0x14 bus 01 mem PCI: 01:00.0 10 <- [0x00e1800000 - 0x00e180ffff] size 0x00010000 gran 0x10 mem64 PCI: 00:1c.1 1c <- [0x0000002000 - 0x0000002fff] size 0x00001000 gran 0x0c bus 02 io PCI: 00:1c.1 24 <- [0x00e0c00000 - 0x00e13fffff] size 0x00800000 gran 0x14 bus 02 prefmem PCI: 00:1c.1 20 <- [0x00e0000000 - 0x00e08fffff] size 0x00900000 gran 0x14 bus 02 mem PCI: 02:00.0 10 <- [0x00e0800000 - 0x00e0801fff] size 0x00002000 gran 0x0d mem64 NONE missing set_resources PCI: 00:1c.3 1c <- [0x000000ffff - 0x000000fffe] size 0x00000000 gran 0x0c bus 03 io PCI: 00:1c.3 24 <- [0x00efffffff - 0x00effffffe] size 0x00000000 gran 0x14 bus 03 prefmem PCI: 00:1c.3 20 <- [0x00e1900000 - 0x00e19fffff] size 0x00100000 gran 0x14 bus 03 mem PCI: 03:00.0 10 <- [0x00e1900000 - 0x00e19000ff] size 0x00000100 gran 0x08 mem PCI: 00:1d.0 10 <- [0x00e1a30000 - 0x00e1a303ff] size 0x00000400 gran 0x0a mem PNP: 00ff.1 missing set_resources PNP: 00ff.2 missing set_resources PCI: 00:1f.2 10 <- [0x0000003080 - 0x0000003087] size 0x00000008 gran 0x03 io PCI: 00:1f.2 14 <- [0x0000003090 - 0x0000003093] size 0x00000004 gran 0x02 io PCI: 00:1f.2 18 <- [0x0000003088 - 0x000000308f] size 0x00000008 gran 0x03 io PCI: 00:1f.2 1c <- [0x0000003094 - 0x0000003097] size 0x00000004 gran 0x02 io PCI: 00:1f.2 20 <- [0x0000003060 - 0x000000307f] size 0x00000020 gran 0x05 io PCI: 00:1f.2 24 <- [0x00e1a2e000 - 0x00e1a2e7ff] size 0x00000800 gran 0x0b mem PCI: 00:1f.3 10 <- [0x00e1a31000 - 0x00e1a310ff] size 0x00000100 gran 0x08 mem64 PCI: 00:1f.6 10 <- [0x00e1a2d000 - 0x00e1a2dfff] size 0x00001000 gran 0x0c mem64 Done setting resources. Done allocating resources. BS: BS_DEV_RESOURCES run times (exec / console): 1 / 0 ms Enabling resources... PCI: 00:00.0 subsystem <- 17aa/21ce PCI: 00:00.0 cmd <- 06 PCI: 00:02.0 subsystem <- 17aa/21ce PCI: 00:02.0 cmd <- 03 PCI: 00:04.0 cmd <- 02 PCI: 00:19.0 subsystem <- 17aa/21ce PCI: 00:19.0 cmd <- 103 PCI: 00:1a.0 subsystem <- 17aa/21ce PCI: 00:1a.0 cmd <- 106 PCI: 00:1b.0 subsystem <- 17aa/21ce PCI: 00:1b.0 cmd <- 102 PCI: 00:1c.0 bridge ctrl <- 0013 PCI: 00:1c.0 subsystem <- 17aa/21ce PCI: 00:1c.0 cmd <- 106 PCI: 00:1c.1 bridge ctrl <- 0013 PCI: 00:1c.1 subsystem <- 17aa/21ce PCI: 00:1c.1 cmd <- 107 PCI: 00:1c.3 bridge ctrl <- 0013 PCI: 00:1c.3 subsystem <- 17aa/21ce PCI: 00:1c.3 cmd <- 106 PCI: 00:1d.0 subsystem <- 17aa/21ce PCI: 00:1d.0 cmd <- 102 PCI: 00:1f.0 subsystem <- 17aa/21ce PCI: 00:1f.0 cmd <- 107 PCI: 00:1f.2 subsystem <- 17aa/21ce PCI: 00:1f.2 cmd <- 03 PCI: 00:1f.3 subsystem <- 17aa/21ce PCI: 00:1f.3 cmd <- 103 PCI: 00:1f.6 subsystem <- 17aa/21ce PCI: 00:1f.6 cmd <- 02 PCI: 01:00.0 cmd <- 02 PCI: 02:00.0 cmd <- 02 PCI: 03:00.0 subsystem <- 17aa/21ce PCI: 03:00.0 cmd <- 06 done. Found TPM ST33ZP24 by ST Microelectronics TPM: Startup TPM: command 0x99 returned 0x0 TPM: Asserting physical presence TPM: command 0x4000000a returned 0x0 TPM: command 0x65 returned 0x0 TPM: flags disable=0, deactivated=0, nvlocked=1 TPM: setup succeeded BS: BS_DEV_INIT entry times (exec / console): 15 / 0 ms Initializing devices... Root Device init Root Device init finished in 0 msecs CPU_CLUSTER: 0 init MTRR: Physical address space: 0x0000000000000000 - 0x00000000000a0000 size 0x000a0000 type 6 0x00000000000a0000 - 0x00000000000c0000 size 0x00020000 type 0 0x00000000000c0000 - 0x0000000080000000 size 0x7ff40000 type 6 0x0000000080000000 - 0x00000000d0000000 size 0x50000000 type 0 0x00000000d0000000 - 0x00000000e0000000 size 0x10000000 type 1 0x00000000e0000000 - 0x0000000100000000 size 0x20000000 type 0 0x0000000100000000 - 0x000000027d600000 size 0x17d600000 type 6 MTRR: Fixed MSR 0x250 0x0606060606060606 MTRR: Fixed MSR 0x258 0x0606060606060606 MTRR: Fixed MSR 0x259 0x0000000000000000 MTRR: Fixed MSR 0x268 0x0606060606060606 MTRR: Fixed MSR 0x269 0x0606060606060606 MTRR: Fixed MSR 0x26a 0x0606060606060606 MTRR: Fixed MSR 0x26b 0x0606060606060606 MTRR: Fixed MSR 0x26c 0x0606060606060606 MTRR: Fixed MSR 0x26d 0x0606060606060606 MTRR: Fixed MSR 0x26e 0x0606060606060606 MTRR: Fixed MSR 0x26f 0x0606060606060606 CPU physical address size: 36 bits MTRR: default type WB/UC MTRR counts: 4/4. MTRR: UC selected as default type. MTRR: 0 base 0x0000000000000000 mask 0x0000000f80000000 type 6 MTRR: 1 base 0x00000000d0000000 mask 0x0000000ff0000000 type 1 MTRR: 2 base 0x0000000100000000 mask 0x0000000f00000000 type 6 MTRR: 3 base 0x0000000200000000 mask 0x0000000f80000000 type 6 MTRR check Fixed MTRRs : Enabled Variable MTRRs: Enabled CPU has 4 cores, 8 threads enabled. Setting up SMI for CPU Will perform SMM setup. FMAP: area COREBOOT found @ 510200 (3079680 bytes) CBFS: Locating 'cpu_microcode_blob.bin' CBFS: Found @ offset 14740 size 6800 microcode: sig=0x306a9 pf=0x10 revision=0x21 CPU: Intel(R) Core(TM) i7-3630QM CPU @ 2.40GHz. Loading module at 0x00030000 with entry 0x00030000. filesize: 0x170 memsize: 0x170 Processing 16 relocs. Offset value of 0x00030000 Attempting to start 7 APs Waiting for 10ms after sending INIT. Waiting for 1st SIPI to complete...done. Waiting for 2nd SIPI to complete...AP: slot 1 apic_id 1. done. AP: slot 2 apic_id 5. AP: slot 6 apic_id 7. AP: slot 3 apic_id 3. AP: slot 4 apic_id 4. AP: slot 7 apic_id 6. AP: slot 5 apic_id 2. Loading module at 0x00038000 with entry 0x00038000. filesize: 0x1b8 memsize: 0x1b8 Processing 13 relocs. Offset value of 0x00038000 SMM Module: stub loaded at 0x00038000. Will call 0x7ffa4f44(0x00000000) Installing SMM handler to 0x80000000 Loading module at 0x80010000 with entry 0x8001060e. filesize: 0x1d50 memsize: 0x5da8 Processing 84 relocs. Offset value of 0x80010000 Loading module at 0x80008000 with entry 0x80008000. filesize: 0x1b8 memsize: 0x1b8 Processing 13 relocs. Offset value of 0x80008000 SMM Module: placing jmp sequence at 0x80007c00 rel16 0x03fd SMM Module: placing jmp sequence at 0x80007800 rel16 0x07fd SMM Module: placing jmp sequence at 0x80007400 rel16 0x0bfd SMM Module: placing jmp sequence at 0x80007000 rel16 0x0ffd SMM Module: placing jmp sequence at 0x80006c00 rel16 0x13fd SMM Module: placing jmp sequence at 0x80006800 rel16 0x17fd SMM Module: placing jmp sequence at 0x80006400 rel16 0x1bfd SMM Module: stub loaded at 0x80008000. Will call 0x8001060e(0x00000000) Initializing Southbridge SMI... New SMBASE 0x80000000 In relocation handler: cpu 0 New SMBASE=0x80000000 IEDBASE=0x80400000 Writing SMRR. base = 0x80000006, mask=0xff800800 Relocation complete. microcode: Update skipped, already up-to-date New SMBASE 0x7ffffc00 In relocation handler: cpu 1 New SMBASE=0x7ffffc00 IEDBASE=0x80400000 Writing SMRR. base = 0x80000006, mask=0xff800800 Relocation complete. microcode: Update skipped, already up-to-date New SMBASE 0x7fffec00 In relocation handler: cpu 5 New SMBASE=0x7fffec00 IEDBASE=0x80400000 Writing SMRR. base = 0x80000006, mask=0xff800800 Relocation complete. microcode: Update skipped, already up-to-date New SMBASE 0x7ffff400 In relocation handler: cpu 3 New SMBASE=0x7ffff400 IEDBASE=0x80400000 Writing SMRR. base = 0x80000006, mask=0xff800800 Relocation complete. microcode: Update skipped, already up-to-date New SMBASE 0x7ffff000 In relocation handler: cpu 4 New SMBASE=0x7ffff000 IEDBASE=0x80400000 Writing SMRR. base = 0x80000006, mask=0xff800800 Relocation complete. microcode: Update skipped, already up-to-date New SMBASE 0x7ffff800 In relocation handler: cpu 2 New SMBASE=0x7ffff800 IEDBASE=0x80400000 Writing SMRR. base = 0x80000006, mask=0xff800800 Relocation complete. microcode: Update skipped, already up-to-date New SMBASE 0x7fffe800 In relocation handler: cpu 6 New SMBASE=0x7fffe800 IEDBASE=0x80400000 Writing SMRR. base = 0x80000006, mask=0xff800800 Relocation complete. microcode: Update skipped, already up-to-date New SMBASE 0x7fffe400 In relocation handler: cpu 7 New SMBASE=0x7fffe400 IEDBASE=0x80400000 Writing SMRR. base = 0x80000006, mask=0xff800800 Relocation complete. microcode: Update skipped, already up-to-date Initializing CPU #0 CPU: vendor Intel device 306a9 CPU: family 06, model 3a, stepping 09 Enabling cache CPU: Intel(R) Core(TM) i7-3630QM CPU @ 2.40GHz. CPU: platform id 4 CPU: cpuid(1) 0x306a9 CPU: AES supported CPU: TXT NOT supported CPU: VT supported Setting up local APIC... apic_id: 0x00 done. VMX status: enabled IA32_FEATURE_CONTROL status: locked model_x06ax: energy policy set to 6 model_x06ax: frequency set to 2400 Turbo is available but hidden Turbo is available and visible CPU #0 initialized Initializing CPU #1 Initializing CPU #2 Initializing CPU #5 Initializing CPU #3 CPU: vendor Intel device 306a9 CPU: vendor Intel device 306a9 CPU: family 06, model 3a, stepping 09 CPU: family 06, model 3a, stepping 09 CPU: vendor Intel device 306a9 CPU: family 06, model 3a, stepping 09 Initializing CPU #4 CPU: vendor Intel device 306a9 CPU: family 06, model 3a, stepping 09 CPU: vendor Intel device 306a9 Enabling cache Enabling cache Initializing CPU #7 Initializing CPU #6 CPU: vendor Intel device 306a9 CPU: family 06, model 3a, stepping 09 CPU: vendor Intel device 306a9 Enabling cache CPU: family 06, model 3a, stepping 09 CPU: Intel(R) Core(TM) i7-3630QM CPU @ 2.40GHz. Enabling cache CPU: Intel(R) Core(TM) i7-3630QM CPU @ 2.40GHz. Enabling cache Enabling cache CPU: Intel(R) Core(TM) i7-3630QM CPU @ 2.40GHz. CPU: family 06, model 3a, stepping 09 CPU: platform id 4 CPU: platform id 4 Enabling cache CPU: cpuid(1) 0x306a9 CPU: Intel(R) Core(TM) i7-3630QM CPU @ 2.40GHz. CPU: Intel(R) Core(TM) i7-3630QM CPU @ 2.40GHz. CPU: platform id 4 CPU: platform id 4 CPU: cpuid(1) 0x306a9 CPU: cpuid(1) 0x306a9 CPU: AES supported CPU: TXT NOT supported CPU: VT supported CPU: AES supported CPU: TXT NOT supported CPU: VT supported Setting up local APIC... Setting up local APIC... CPU: platform id 4 CPU: Intel(R) Core(TM) i7-3630QM CPU @ 2.40GHz. CPU: cpuid(1) 0x306a9 CPU: platform id 4 CPU: AES supported CPU: TXT NOT supported CPU: VT supported CPU: cpuid(1) 0x306a9 Setting up local APIC... CPU: AES supported CPU: TXT NOT supported CPU: VT supported apic_id: 0x06 done. Setting up local APIC... VMX status: enabled apic_id: 0x02 done. apic_id: 0x03 done. VMX status: enabled VMX status: enabled IA32_FEATURE_CONTROL status: locked IA32_FEATURE_CONTROL status: locked apic_id: 0x07 done. CPU: cpuid(1) 0x306a9 IA32_FEATURE_CONTROL status: locked VMX status: enabled model_x06ax: energy policy set to 6 CPU: AES supported CPU: TXT NOT supported CPU: VT supported CPU: Intel(R) Core(TM) i7-3630QM CPU @ 2.40GHz. Setting up local APIC... CPU: platform id 4 IA32_FEATURE_CONTROL status: locked model_x06ax: energy policy set to 6 model_x06ax: frequency set to 2400 model_x06ax: energy policy set to 6 CPU #5 initialized CPU: cpuid(1) 0x306a9 apic_id: 0x05 done. CPU: AES supported CPU: TXT NOT supported CPU: VT supported VMX status: enabled Setting up local APIC... IA32_FEATURE_CONTROL status: locked model_x06ax: frequency set to 2400 model_x06ax: frequency set to 2400 CPU #3 initialized CPU #7 initialized model_x06ax: energy policy set to 6 apic_id: 0x04 done. model_x06ax: frequency set to 2400 VMX status: enabled model_x06ax: energy policy set to 6 IA32_FEATURE_CONTROL status: locked CPU: AES supported CPU: TXT NOT supported CPU: VT supported model_x06ax: frequency set to 2400 CPU #2 initialized CPU #6 initialized Setting up local APIC... model_x06ax: energy policy set to 6 apic_id: 0x01 model_x06ax: frequency set to 2400 done. CPU #4 initialized VMX status: enabled IA32_FEATURE_CONTROL status: locked model_x06ax: energy policy set to 6 model_x06ax: frequency set to 2400 CPU #1 initialized bsp_do_flight_plan done after 26 msecs. Initializing southbridge SMI... SMI_STS: GPE0_STS: GPIO14 GPIO11 GPIO9 GPIO7 GPIO6 GPIO5 GPIO4 GPIO3 GPIO0 ALT_GP_SMI_STS: GPI14 GPI13 GPI11 GPI10 GPI9 GPI7 GPI6 GPI5 GPI4 GPI3 GPI1 GPI0 TCO_STS: Locking SMM. CPU_CLUSTER: 0 init finished in 40 msecs PCI: 00:00.0 init Disabling PEG12. Disabling PEG11. Disabling PEG10. Disabling PEG60. Disabling Device 7. Disabling PEG IO clock. Set BIOS_RESET_CPL CPU TDP: 45 Watts PCI: 00:00.0 init finished in 1 msecs PCI: 00:02.0 init GT Power Management Init IVB GT2 35W Power Meter Weights GT Power Management Init (post VBIOS) PCI: 00:02.0 init finished in 0 msecs PCI: 00:04.0 init PCI: 00:04.0 init finished in 0 msecs PCI: 00:19.0 init PCI: 00:19.0 init finished in 0 msecs PCI: 00:1a.0 init EHCI: Setting up controller.. done. PCI: 00:1a.0 init finished in 0 msecs PCI: 00:1b.0 init Azalia: base = e1a28000 Azalia: codec_mask = 0b Azalia: Initializing codec #3 Azalia: codec viddid: 80862805 Azalia: No verb! Azalia: Initializing codec #1 Azalia: codec viddid: 14f12c06 Azalia: No verb! Azalia: Initializing codec #0 Azalia: codec viddid: 14f1506e Azalia: verb_size: 52 Azalia: verb loaded. PCI: 00:1b.0 init finished in 4 msecs PCI: 00:1c.0 init Initializing PCH PCIe bridge. PCI: 00:1c.0 init finished in 0 msecs PCI: 00:1c.1 init Initializing PCH PCIe bridge. PCI: 00:1c.1 init finished in 0 msecs PCI: 00:1c.3 init Initializing PCH PCIe bridge. PCI: 00:1c.3 init finished in 0 msecs PCI: 00:1d.0 init EHCI: Setting up controller.. done. PCI: 00:1d.0 init finished in 0 msecs PCI: 00:1f.0 init pch: lpc_init PCH: detected QM67, device id: 0x1c4f, rev id 0x5 IOAPIC: Initializing IOAPIC at 0xfec00000 IOAPIC: Bootstrap Processor Local APIC = 0x00 IOAPIC: ID = 0x02 Set power off after power failure. NMI sources enabled. CougarPoint PM init RTC: failed = 0x0 RTC Init Disabling ACPI via APMC: done. pch_spi_init PCI: 00:1f.0 init finished in 73 msecs PCI: 00:1f.2 init SATA: Initializing... SATA: Controller in AHCI mode. ABAR: 0xe1a2e000 PCI: 00:1f.2 init finished in 0 msecs PCI: 00:1f.3 init PCI: 00:1f.3 init finished in 0 msecs PCI: 00:1f.6 init PCI: 00:1f.6 init finished in 0 msecs PCI: 01:00.0 init PCI: 01:00.0 init finished in 0 msecs PCI: 02:00.0 init PCI: 02:00.0 init finished in 0 msecs PCI: 03:00.0 init PCI: 03:00.0 init finished in 0 msecs PNP: 00ff.2 init Keyboard init... Keyboard reset failed ACK: 0xaa PNP: 00ff.2 init finished in 286 msecs smbus: PCI: 00:1f.3[0]->I2C: 01:54 init I2C: 01:54 init finished in 0 msecs smbus: PCI: 00:1f.3[0]->I2C: 01:55 init I2C: 01:55 init finished in 0 msecs smbus: PCI: 00:1f.3[0]->I2C: 01:56 init I2C: 01:56 init finished in 0 msecs smbus: PCI: 00:1f.3[0]->I2C: 01:57 init I2C: 01:57 init finished in 0 msecs smbus: PCI: 00:1f.3[0]->I2C: 01:5c init Locking EEPROM RFID init EEPROM done I2C: 01:5c init finished in 25 msecs smbus: PCI: 00:1f.3[0]->I2C: 01:5d init I2C: 01:5d init finished in 0 msecs smbus: PCI: 00:1f.3[0]->I2C: 01:5e init I2C: 01:5e init finished in 0 msecs smbus: PCI: 00:1f.3[0]->I2C: 01:5f init I2C: 01:5f init finished in 0 msecs Devices initialized BS: BS_DEV_INIT run times (exec / console): 433 / 0 ms Finalize devices... PCI: 00:1f.0 final Manufacturer: c2 SF: Detected c2 2017 with sector size 0x1000, total 0x800000 Devices finalized FMAP: area COREBOOT found @ 510200 (3079680 bytes) CBFS: Locating 'fallback/dsdt.aml' CBFS: Found @ offset 48f80 size 3ac1 FMAP: area COREBOOT found @ 510200 (3079680 bytes) CBFS: Locating 'fallback/slic' CBFS: 'fallback/slic' not found. ACPI: Writing ACPI tables at 7ff4f000. ACPI: * FACS ACPI: * DSDT ACPI: * FADT ACPI: added table 1/32, length now 40 ACPI: * SSDT Found 1 CPU(s) with 8 core(s) each. PSS: 2401MHz power 45000 control 0x2200 status 0x2200 PSS: 2400MHz power 45000 control 0x1800 status 0x1800 PSS: 2200MHz power 40271 control 0x1600 status 0x1600 PSS: 2000MHz power 35760 control 0x1400 status 0x1400 PSS: 1800MHz power 31455 control 0x1200 status 0x1200 PSS: 1600MHz power 27302 control 0x1000 status 0x1000 PSS: 1400MHz power 23322 control 0xe00 status 0xe00 PSS: 1200MHz power 19530 control 0xc00 status 0xc00 PSS: 2401MHz power 45000 control 0x2200 status 0x2200 PSS: 2400MHz power 45000 control 0x1800 status 0x1800 PSS: 2200MHz power 40271 control 0x1600 status 0x1600 PSS: 2000MHz power 35760 control 0x1400 status 0x1400 PSS: 1800MHz power 31455 control 0x1200 status 0x1200 PSS: 1600MHz power 27302 control 0x1000 status 0x1000 PSS: 1400MHz power 23322 control 0xe00 status 0xe00 PSS: 1200MHz power 19530 control 0xc00 status 0xc00 PSS: 2401MHz power 45000 control 0x2200 status 0x2200 PSS: 2400MHz power 45000 control 0x1800 status 0x1800 PSS: 2200MHz power 40271 control 0x1600 status 0x1600 PSS: 2000MHz power 35760 control 0x1400 status 0x1400 PSS: 1800MHz power 31455 control 0x1200 status 0x1200 PSS: 1600MHz power 27302 control 0x1000 status 0x1000 PSS: 1400MHz power 23322 control 0xe00 status 0xe00 PSS: 1200MHz power 19530 control 0xc00 status 0xc00 PSS: 2401MHz power 45000 control 0x2200 status 0x2200 PSS: 2400MHz power 45000 control 0x1800 status 0x1800 PSS: 2200MHz power 40271 control 0x1600 status 0x1600 PSS: 2000MHz power 35760 control 0x1400 status 0x1400 PSS: 1800MHz power 31455 control 0x1200 status 0x1200 PSS: 1600MHz power 27302 control 0x1000 status 0x1000 PSS: 1400MHz power 23322 control 0xe00 status 0xe00 PSS: 1200MHz power 19530 control 0xc00 status 0xc00 PSS: 2401MHz power 45000 control 0x2200 status 0x2200 PSS: 2400MHz power 45000 control 0x1800 status 0x1800 PSS: 2200MHz power 40271 control 0x1600 status 0x1600 PSS: 2000MHz power 35760 control 0x1400 status 0x1400 PSS: 1800MHz power 31455 control 0x1200 status 0x1200 PSS: 1600MHz power 27302 control 0x1000 status 0x1000 PSS: 1400MHz power 23322 control 0xe00 status 0xe00 PSS: 1200MHz power 19530 control 0xc00 status 0xc00 PSS: 2401MHz power 45000 control 0x2200 status 0x2200 PSS: 2400MHz power 45000 control 0x1800 status 0x1800 PSS: 2200MHz power 40271 control 0x1600 status 0x1600 PSS: 2000MHz power 35760 control 0x1400 status 0x1400 PSS: 1800MHz power 31455 control 0x1200 status 0x1200 PSS: 1600MHz power 27302 control 0x1000 status 0x1000 PSS: 1400MHz power 23322 control 0xe00 status 0xe00 PSS: 1200MHz power 19530 control 0xc00 status 0xc00 PSS: 2401MHz power 45000 control 0x2200 status 0x2200 PSS: 2400MHz power 45000 control 0x1800 status 0x1800 PSS: 2200MHz power 40271 control 0x1600 status 0x1600 PSS: 2000MHz power 35760 control 0x1400 status 0x1400 PSS: 1800MHz power 31455 control 0x1200 status 0x1200 PSS: 1600MHz power 27302 control 0x1000 status 0x1000 PSS: 1400MHz power 23322 control 0xe00 status 0xe00 PSS: 1200MHz power 19530 control 0xc00 status 0xc00 PSS: 2401MHz power 45000 control 0x2200 status 0x2200 PSS: 2400MHz power 45000 control 0x1800 status 0x1800 PSS: 2200MHz power 40271 control 0x1600 status 0x1600 PSS: 2000MHz power 35760 control 0x1400 status 0x1400 PSS: 1800MHz power 31455 control 0x1200 status 0x1200 PSS: 1600MHz power 27302 control 0x1000 status 0x1000 PSS: 1400MHz power 23322 control 0xe00 status 0xe00 PSS: 1200MHz power 19530 control 0xc00 status 0xc00 Generating ACPI PIRQ entries \_SB.PCI0.LPCB.TPM.TPM: LPC TPM PNP: 0c31.0 ACPI: * H8 H8: BDC installed H8: WWAN detection not implemented. Assuming WWAN installed ACPI: added table 2/32, length now 44 ACPI: * MCFG ACPI: added table 3/32, length now 48 ACPI: * TCPA TCPA log created at 0x7ff3e000 ACPI: added table 4/32, length now 52 ACPI: * MADT ACPI: added table 5/32, length now 56 current = 7ff55f10 FMAP: area COREBOOT found @ 510200 (3079680 bytes) CBFS: Locating 'vbt.bin' CBFS: Found @ offset 33140 size 558 Found a VBT of 3985 bytes after decompression GMA: Found VBT in CBFS GMA: Found valid VBT in CBFS ACPI: * HPET ACPI: added table 6/32, length now 60 ACPI: done. ACPI tables: 36688 bytes. smbios_write_tables: 7ff3d000 Create SMBIOS type 17 SMBIOS tables: 886 bytes. Writing table forward entry at 0x00000500 Wrote coreboot table at: 0x00000500, 0x10 bytes, checksum 4fe7 Writing coreboot table at 0x7ff73000 FMAP: area COREBOOT found @ 510200 (3079680 bytes) CBFS: Locating 'cmos_layout.bin' CBFS: Found @ offset 33840 size 7c8 0. 0000000000000000-0000000000000fff: CONFIGURATION TABLES 1. 0000000000001000-000000000009ffff: RAM 2. 00000000000a0000-00000000000fffff: RESERVED 3. 0000000000100000-000000007ff3cfff: RAM 4. 000000007ff3d000-000000007ff8bfff: CONFIGURATION TABLES 5. 000000007ff8c000-000000007ffd1fff: RAMSTAGE 6. 000000007ffd2000-000000007fffffff: CONFIGURATION TABLES 7. 0000000080000000-00000000829fffff: RESERVED 8. 00000000f0000000-00000000f3ffffff: RESERVED 9. 00000000fed40000-00000000fed44fff: RESERVED 10. 0000000100000000-000000027d5fffff: RAM FMAP: area COREBOOT found @ 510200 (3079680 bytes) Wrote coreboot table at: 0x7ff73000, 0xb3c bytes, checksum e82a coreboot table: 2900 bytes. IMD ROOT 0. 0x7ffff000 0x00001000 IMD SMALL 1. 0x7fffe000 0x00001000 CONSOLE 2. 0x7ffde000 0x00020000 TIME STAMP 3. 0x7ffdd000 0x00000910 ROMSTG STCK 4. 0x7ffdc000 0x00001000 AFTER CAR 5. 0x7ffd2000 0x0000a000 RAMSTAGE 6. 0x7ff8b000 0x00047000 SMM BACKUP 7. 0x7ff7b000 0x00010000 COREBOOT 8. 0x7ff73000 0x00008000 ACPI 9. 0x7ff4f000 0x00024000 ACPI GNVS 10. 0x7ff4e000 0x00001000 TCPA TCGLOG11. 0x7ff3e000 0x00010000 SMBIOS 12. 0x7ff3d000 0x00000800 IMD small region: IMD ROOT 0. 0x7fffec00 0x00000400 USBDEBUG 1. 0x7fffeba0 0x00000050 FMAP 2. 0x7fffeac0 0x000000e0 MEM INFO 3. 0x7fffe900 0x000001b9 ROMSTAGE 4. 0x7fffe8e0 0x00000004 BS: BS_WRITE_TABLES run times (exec / console): 26 / 0 ms FMAP: area COREBOOT found @ 510200 (3079680 bytes) CBFS: Locating 'fallback/payload' CBFS: Found @ offset 6a2c0 size 11f2e Checking segment from ROM address 0xffd7a4f8 Payload being loaded at below 1MiB without region being marked as RAM usable. Checking segment from ROM address 0xffd7a514 Loading segment from ROM address 0xffd7a4f8 code (compression=1) New segment dstaddr 0x000dd680 memsize 0x22980 srcaddr 0xffd7a530 filesize 0x11ef6 Loading Segment: addr: 0x000dd680 memsz: 0x0000000000022980 filesz: 0x0000000000011ef6 using LZMA Loading segment from ROM address 0xffd7a514 Entry Point 0x000fcd46 BS: BS_PAYLOAD_LOAD run times (exec / console): 32 / 0 ms ICH-NM10-PCH: watchdog disabled Jumping to boot code at 0x000fcd46(0x7ff73000) SeaBIOS (version rel-1.13.0-14-gbfdb3f8) BUILD: gcc: (coreboot toolchain vdfd3f21174 2019-05-03) 9.2.0 binutils: (GNU Binutils) 2.33.1 Found coreboot cbmem console @ 7ffde000 Found mainboard LENOVO ThinkPad T420 malloc preinit Relocating init from 0x000defa0 to 0x7feef2e0 (size 56448) malloc init Found CBFS header at 0xffd10238 Add romfile: cbfs master header (size=32) Add romfile: fallback/romstage (size=83540) Add romfile: cpu_microcode_blob.bin (size=26624) Add romfile: fallback/ramstage (size=96883) Add romfile: config (size=847) Add romfile: revision (size=675) Add romfile: vbt.bin (size=1368) Add romfile: cmos.default (size=256) Add romfile: cmos_layout.bin (size=1992) Add romfile: pci8086,0166.rom (size=65536) Add romfile: fallback/postcar (size=20080) Add romfile: fallback/dsdt.aml (size=15041) Add romfile: img/coreinfo (size=52331) Add romfile: img/nvramcui (size=68372) Add romfile: fallback/payload (size=73518) Add romfile: payload_config (size=1639) Add romfile: payload_revision (size=238) Add romfile: etc/ps2-keyboard-spinup (size=8) Add romfile: (size=2503448) Add romfile: bootblock (size=65536) multiboot: eax=7ffbbf80, ebx=7ffbbf44 init ivt init bda init bios32 init PMM init PNPBIOS table init keyboard init mouse init pic math cp init PCI probe PCI device 00:00.0 (vd=8086:0154 c=0600) PCI device 00:02.0 (vd=8086:0166 c=0300) PCI device 00:04.0 (vd=8086:0153 c=1180) PCI device 00:19.0 (vd=8086:1502 c=0200) PCI device 00:1a.0 (vd=8086:1c2d c=0c03) PCI device 00:1b.0 (vd=8086:1c20 c=0403) PCI device 00:1c.0 (vd=8086:1c12 c=0604) PCI device 00:1c.1 (vd=8086:1c16 c=0604) PCI device 00:1c.3 (vd=8086:1c18 c=0604) PCI device 00:1d.0 (vd=8086:1c26 c=0c03) PCI device 00:1f.0 (vd=8086:1c4f c=0601) PCI device 00:1f.2 (vd=8086:1c03 c=0106) PCI device 00:1f.3 (vd=8086:1c22 c=0c05) PCI device 00:1f.6 (vd=8086:1c24 c=1180) PCI device 01:00.0 (vd=168c:002a c=0280) PCI device 02:00.0 (vd=1912:0015 c=0c03) PCI device 03:00.0 (vd=1180:e823 c=0805) Found 17 PCI devices (max PCI bus is 03) Relocating coreboot bios tables Copying SMBIOS entry point from 0x7ff3d000 to 0x000f5b40 Copying ACPI RSDP from 0x7ff4f000 to 0x000f5b10 rsdp=0x000f5b10 rsdt=0x7ff4f030 table(50434146)=0x7ff52d60 pm_tmr_blk=508 Using pmtimer, ioport 0x508 init timer rsdp=0x000f5b10 rsdt=0x7ff4f030 no table 324d5054 found rsdp=0x000f5b10 rsdt=0x7ff4f030 table(41504354)=0x7ff55e40 Scan for VGA option rom Attempting to init PCI bdf 00:02.0 (vd 8086:0166) Copying data 65536@0xffd44288 to 65536@0x000c0000 Running option rom at c000:0003 Turning on vga text mode console SeaBIOS (version rel-1.13.0-14-gbfdb3f8) Machine UUID d23c7681-5181-11cb-a05e-e493c804f67d init usb WARNING - internal error detected at pci_enable_membar:186! EHCI init on dev 00:1a.0 (regs=0xe1a2f020) /7feec000\ Start thread EHCI init on dev 00:1d.0 (regs=0xe1a30020) /7feeb000\ Start thread init ps2port /7feea000\ Start thread |7feea000| Copying data 8@0xffd8cc78 to 8@0x7feeafd8 init floppy drives init hard drives init ahci AHCI controller at 00:1f.2, iobase 0xe1a2e000, irq 10 AHCI: cap 0xff30ff05, ports_impl 0x1f /7fee9000\ Start thread |7fee9000| AHCI/0: probing /7fee7000\ Start thread |7fee7000| AHCI/1: probing /7fee6000\ Start thread |7fee6000| AHCI/2: probing |7fee7000| AHCI/1: link up /7fee4000\ Start thread |7fee4000| AHCI/3: probing /7fee3000\ Start thread |7fee3000| AHCI/4: probing /7fee2000\ Start thread |7fee2000| Searching bootorder for: /pci@i0cf8/pci-bridge@1c,3/*@0 \7fee2000/ End thread Searching bootorder for: HALT init megasas init nvme init lpt Found 0 lpt ports init serial Found 0 serial ports Searching bootorder for: /rom@img/nvramcui Registering bootable: Payload [nvramcui] (type:32 prio:9999 data:ffd69980) Searching bootorder for: /rom@img/coreinfo Registering bootable: Payload [coreinfo] (type:32 prio:9999 data:ffd5ccc0) |7fee7000| AHCI/1: ... finished, status 0x51, ERROR 0x4 |7fee7000| Searching bootorder for: /pci@i0cf8/*@1f,2/drive@1/disk@0 |7fee7000| AHCI/1: supported modes: udma 6, multi-dma 2, pio 4 |7fee7000| AHCI/1: Set transfer mode to UDMA-6 |7fee7000| Searching bios-geometry for: /pci@i0cf8/*@1f,2/drive@1/disk@0 |7fee7000| AHCI/1: registering: "AHCI/1: SanDisk SDSSDA240G ATA-9 Hard-Disk (223 GiBytes)" |7fee7000| Registering bootable: AHCI/1: SanDisk SDSSDA240G ATA-9 Hard-Disk (223 GiBytes) (type:2 prio:103 data:f5aa0) \7fee7000/ End thread |7fee9000| AHCI/0: link down \7fee9000/ End thread |7fee6000| AHCI/2: link down \7fee6000/ End thread |7fee4000| AHCI/3: link down \7fee4000/ End thread |7fee3000| AHCI/4: link down \7fee3000/ End thread /7fee9000\ Start thread /7fee7000\ Start thread /7fee6000\ Start thread /7fee4000\ Start thread /7fee3000\ Start thread /7fee2000\ Start thread |7fee9000| set_address 0x7feedb30 |7fee7000| set_address 0x7feedc40 |7fee9000| config_usb: 0x7feed650 |7fee7000| config_usb: 0x7feed5d0 |7fee9000| device rev=0200 cls=09 sub=00 proto=01 size=64 |7fee7000| device rev=0200 cls=09 sub=00 proto=01 size=64 \7fee6000/ End thread \7fee4000/ End thread \7fee3000/ End thread \7fee2000/ End thread /7fee6000\ Start thread /7fee4000\ Start thread /7fee3000\ Start thread /7fee2000\ Start thread /7fee1000\ Start thread /7fee0000\ Start thread /7fedf000\ Start thread /7fede000\ Start thread /7fedd000\ Start thread /7fedc000\ Start thread /7fedb000\ Start thread /7feda000\ Start thread /7fed9000\ Start thread /7fed8000\ Start thread |7fee2000| set_address 0x7feedc40 |7fedf000| set_address 0x7feedb30 |7fedf000| ehci_wait_td error - status=80248 \7fedf000/ End thread |7fee2000| config_usb: 0x7fee8ed0 |7fee2000| device rev=0200 cls=e0 sub=01 proto=01 size=64 \7fee2000/ End thread |7fee4000| set_address 0x7feedc40 |7fee4000| config_usb: 0x7fee8ed0 |7fee4000| device rev=0200 cls=00 sub=00 proto=00 size=8 |7fee4000| usb_hid_setup 0x7fee8ed0 |7fee4000| USB keyboard initialized \7fee4000/ End thread |7fede000| set_address 0x7feedc40 |7fede000| config_usb: 0x7fee8ed0 \7fee6000/ End thread \7fee0000/ End thread \7fee1000/ End thread \7fedd000/ End thread \7fee3000/ End thread \7fed8000/ End thread \7fed9000/ End thread \7feda000/ End thread \7fedb000/ End thread \7fedc000/ End thread |7fee9000| Initialized USB HUB (0 ports used) \7fee9000/ End thread \7feeb000/ End thread |7feea000| PS2 keyboard initialized \7feea000/ End thread |7fede000| WARNING - Timeout at ehci_wait_td:517! |7fede000| ehci pipe=0x7fee8e80 cur=7fededc0 tok=80080d80 next=7fedee00 td=0x7fededc0 status=80080d80 \7fede000/ End thread |7fee7000| Initialized USB HUB (1 ports used) \7fee7000/ End thread \7feec000/ End thread All threads complete. Scan for option roms Attempting to init PCI bdf 00:00.0 (vd 8086:0154) Attempting to init PCI bdf 00:04.0 (vd 8086:0153) Attempting to init PCI bdf 00:19.0 (vd 8086:1502) Attempting to init PCI bdf 00:1b.0 (vd 8086:1c20) Attempting to init PCI bdf 00:1c.0 (vd 8086:1c12) Attempting to init PCI bdf 00:1c.1 (vd 8086:1c16) Attempting to init PCI bdf 00:1c.3 (vd 8086:1c18) Attempting to init PCI bdf 00:1f.0 (vd 8086:1c4f) Attempting to init PCI bdf 00:1f.3 (vd 8086:1c22) Attempting to init PCI bdf 00:1f.6 (vd 8086:1c24) Attempting to init PCI bdf 01:00.0 (vd 168c:002a) Attempting to init PCI bdf 02:00.0 (vd 1912:0015) Press ESC for boot menu. Checking for bootsplash Select boot device: 1. AHCI/1: SanDisk SDSSDA240G ATA-9 Hard-Disk (223 GiBytes) 2. Payload [nvramcui] 3. Payload [coreinfo] t. TPM Configuration Searching bootorder for: HALT Mapping hd drive 0x000f5aa0 to 0 drive 0x000f5aa0: PCHS=16383/16/63 translation=lba LCHS=1024/255/63 s=468862128 finalize PMM malloc finalize Space available for UMB: cf800-eb000, f5360-f5aa0 Returned 253952 bytes of ZoneHigh e820 map has 8 items: 0: 0000000000000000 - 000000000009fc00 = 1 RAM 1: 000000000009fc00 - 00000000000a0000 = 2 RESERVED 2: 00000000000f0000 - 0000000000100000 = 2 RESERVED 3: 0000000000100000 - 000000007ff3b000 = 1 RAM 4: 000000007ff3b000 - 0000000082a00000 = 2 RESERVED 5: 00000000f0000000 - 00000000f4000000 = 2 RESERVED 6: 00000000fed40000 - 00000000fed45000 = 2 RESERVED 7: 0000000100000000 - 000000027d600000 = 1 RAM Jump to int19 enter handle_19: NULL Booting from Hard Disk... Booting from 0000:7c00
_______________________________________________ SeaBIOS mailing list -- seabios@seabios.org To unsubscribe send an email to seabios-le...@seabios.org
