On Tue, May 12, 2020 at 03:39:58PM +0000, Mogens Jensen wrote:
> First posted this question to coreboot mailing list, but on second thought, I 
> think this is the right place.
> I have experimentet with coreboot on my CompuLab Intense PC (Ivy Bridge) for 
> some time, and I think everything is working now, with Intel ME disabled. 
> Although, I have some troubles with boot selection.
> I'm currently running coreboot [4cea00a64] with default SeaBIOS payload 
> [v1.13.0] and a bootorder file. The boot device search order is this:
> 1. USB 2.0 device
> 2. USB 3.0 device
> 3. SATA devices (in order: 2.5″ internal, mSATA, eSATA, FACE module)
> During testing I have been running the system from a USB 3.0 flash disk. This 
> worked as expected and system would automatically select this device during 
> boot/reboot.
> I then wanted to use the internal 2.5" SATA disk, so I installed an OS and 
> confirmed it working by manually selecting the SATA disk in boot menu. I then 
> removed boot sector from flash disk, reboot and expected that the system 
> would now automatically boot from internal SATA disk, but this happened 
> instead:
> ===
> Booting from Hard Disk... Boot failed: not a bootable disk
> Booting from Floppy... Boot failed: not a bootable disk
> No bootable device. Retrying in 60 seconds.
> ===
> Not sure what is going on with "Floppy". No such thing exists on the system. 
> If I remove flash disk from USB port before power on, the system will boot 
> correctly from internal SATA disk. Is this correct behaviour?
> I would expect that it should not matter that flash disk is inserted in USB 
> port, as long as no boot sector is present on the device. If this is NOT 
> correct behaviour, then what could be the problem here?

Although that expectation is reasonable, it's not how a traditional
BIOS works.  One can select which hard drive is the "bootable" drive
during the "boot menu" phase.  That drive effectively becomes the "C:"
drive and it can be booted from.  However, if that drive is not
bootable then no hard drive can be booted (as in practice it's only
possible to boot from the "C:" drive on a BIOS).

So, in short, use the boot menu to select the alternate drive (or the
bootorder cbfs file).  Don't expect an automatic search of bootable

SeaBIOS mailing list -- seabios@seabios.org
To unsubscribe send an email to seabios-le...@seabios.org

Reply via email to