[SeaBIOS] [PATCH] virtio-scsi: fix boot prio detection by using correct lun

[Stefan Reiter]

Commits

  d6bdb85eb0 virtio-scsi: skip initializing non-bootable devices
  f82e82a5ab2 virtio-mmio: add support for scsi devices.

both use the lun value from tmpl_drv, which is always 0, instead of the
correct one passed as a seperate parameter. This causes systems where
LUNs other than 0 are set as bootable, but 0 is not, to not boot.

Signed-off-by: Stefan Reiter <s.rei...@proxmox.com>
---
 src/hw/virtio-scsi.c | 6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)

diff --git a/src/hw/virtio-scsi.c b/src/hw/virtio-scsi.c
index 59f1c65..369c981 100644
--- a/src/hw/virtio-scsi.c
+++ b/src/hw/virtio-scsi.c
@@ -126,14 +126,14 @@ virtio_scsi_add_lun(u32 lun, struct drive_s *tmpl_drv)
     int prio = -1;
 
     if (tmpl_vlun->pci)
-        prio = bootprio_find_scsi_device(tmpl_vlun->pci, tmpl_vlun->target, 
tmpl_vlun->lun);
+        prio = bootprio_find_scsi_device(tmpl_vlun->pci, tmpl_vlun->target, 
lun);
     if (tmpl_vlun->mmio)
-        prio = bootprio_find_scsi_mmio_device(tmpl_vlun->mmio, 
tmpl_vlun->target, tmpl_vlun->lun);
+        prio = bootprio_find_scsi_mmio_device(tmpl_vlun->mmio, 
tmpl_vlun->target, lun);
 
     if (skip_nonbootable && prio < 0) {
         dprintf(1, "skipping init of a non-bootable virtio-scsi dev at %s,"
                 " target %d, lun %d\n",
-                tmpl_vlun->name, tmpl_vlun->target, tmpl_vlun->lun);
+                tmpl_vlun->name, tmpl_vlun->target, lun);
         return -1;
     }
 
-- 
2.20.1

_______________________________________________
SeaBIOS mailing list -- seabios@seabios.org
To unsubscribe send an email to seabios-le...@seabios.org