## Question
Once l input `run` in `gdb out/rom.o` command prompt, The progrem will crash
with error `During startup program terminated with signal SIGSEGV, Segmentation
fault.`
## Reproduce
As what the website(https://www.seabios.org/Debugging) said, I add '-s -S' to
the QEMU command line and start qemu-system-x86_64. And then, I open another
terminal to run `gdb out/rom.o`.
Once in gdb, after l input `target remote localhost:1234`, the gdb have
warning(warning: Selected architecture i386 is not compatible with reported
target architecture i386:x86-64 && warning: Architecture rejected
target-supplied description). I set a break point `b do_boot`, and input
`run`. To my surprise, the gdb command prompt throws a error `During startup
program terminated with signal SIGSEGV, Segmentation fault.`
``` The first terminal
# /usr/bin/qemu-system-x86_64 \
-name guest=VM,debug-threads=on \
-bios /root/qemu/out/bios.bin \
-S -s\
-machine pc-i440fx-5.0,accel=kvm,usb=off,dump-guest-core=off \
-cpu Broadwell-IBRS,vmx=off \
-m size=2097152k,slots=64,maxmem=268435456k \
-overcommit mem-lock=off \
-smp 3,maxcpus=4,sockets=2,dies=1,cores=2,threads=1 \
-numa node,nodeid=0,cpus=0-1,cpus=3,mem=1365 \
-numa node,nodeid=1,cpus=2,mem=683 \
-uuid bee8da7f-b699-4f20-9e82-091e809b6e47 \
-no-user-config \
-nodefaults \
-rtc base=utc \
-no-shutdown \
-boot strict=on \
-device pci-bridge,chassis_nr=1,id=pci.1,bus=pci.0,addr=0x3 \
-device pci-bridge,chassis_nr=2,id=pci.2,bus=pci.0,addr=0x4 \
-device piix3-usb-uhci,id=usb,bus=pci.0,addr=0x1.0x2 \
-device usb-ehci,id=usb1,bus=pci.0,addr=0x8 \
-device nec-usb-xhci,id=usb2,bus=pci.0,addr=0x9 \
-device ich9-usb-ehci1,id=usb3,bus=pci.0,addr=0xa.0x7 \
-device
ich9-usb-uhci1,masterbus=usb3.0,firstport=0,bus=pci.0,multifunction=on,addr=0xa
\
-device ich9-usb-uhci2,masterbus=usb3.0,firstport=2,bus=pci.0,addr=0xa.0x1 \
-device ich9-usb-uhci3,masterbus=usb3.0,firstport=4,bus=pci.0,addr=0xa.0x2 \
-device virtio-scsi-pci,id=scsi0,bus=pci.0,addr=0x7 \
-device virtio-serial-pci,id=virtio-serial0,bus=pci.0,addr=0xb \
-device ide-cd,bus=ide.1,unit=1,id=ide0-1-1,bootindex=1 \
-device floppy,unit=0,id=fdc0-0-0 \
-blockdev
'{"driver":"iscsi","portal":"{ip1}:{port1}","target":"{lun}","lun":1,"transport":"tcp","node-name":"libvirt-2-storage","cache":{"direct":true,"no-flush":false},"auto-read-only":true,"discard":"unmap"}'
\
-blockdev
'{"node-name":"libvirt-2-format","read-only":false,"cache":{"direct":true,"no-flush":false},"driver":"raw","file":"libvirt-2-storage"}'
\
-device
scsi-hd,bus=scsi0.0,channel=0,scsi-id=0,lun=0,device_id=drive-scsi0-0-0-0,drive=libvirt-2-format,id=scsi0-0-0-0,bootindex=2,write-cache=on
\
-spice
port=5903,addr=::0.0.0.0,image-compression=lz,streaming-video=all,seamless-migration=on
\
-chardev stdio,id=seabios -device isa-debugcon,iobase=0x402,chardev=seabios
```
``` The Second Terminal
# gdb out/rom.o
GNU gdb (GDB) Red Hat Enterprise Linux 8.2-12.el8
Copyright (C) 2018 Free Software Foundation, Inc.
License GPLv3+: GNU GPL version 3 or later <http://gnu.org/licenses/gpl.html>
This is free software: you are free to change and redistribute it.
There is NO WARRANTY, to the extent permitted by law.
Type "show copying" and "show warranty" for details.
This GDB was configured as "x86_64-redhat-linux-gnu".
Type "show configuration" for configuration details.
For bug reporting instructions, please see:
<http://www.gnu.org/software/gdb/bugs/>.
Find the GDB manual and other documentation resources online at:
<http://www.gnu.org/software/gdb/documentation/>.
For help, type "help".
Type "apropos word" to search for commands related to "word"...
Reading symbols from out/rom.o...done.
(gdb) target remote localhost:1234
Remote debugging using localhost:1234
warning: Selected architecture i386 is not compatible with reported target
architecture i386:x86-64
warning: Architecture rejected target-supplied description
Remote 'g' packet reply is too long (expected 312 bytes, got 608 bytes):
000000000000000000000000000000000000000000000000d206030000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000f0ff0000000000000200000000f00000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000010000060000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000007f030000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000801f0000
(gdb) b do_boot
Breakpoint 1 at 0xf0f31: file ./src/boot.c, line 975.
(gdb) r
Starting program: /root/qemu/out/rom.o
During startup program terminated with signal SIGSEGV, Segmentation fault.
(gdb)
```
## some env info
```
# cat /etc/redhat-release
CentOS Linux release 8.2.2004 (Core)
# uname -a
Linux TOS-1048 4.18.0-167.el8.x86_64 #9 SMP Mon Jul 20 16:03:29 CST 2020 x86_64
x86_64 x86_64 GNU/Linux
# gdb --version
GNU gdb (GDB) Red Hat Enterprise Linux 8.2-12.el8
Copyright (C) 2018 Free Software Foundation, Inc.
License GPLv3+: GNU GPL version 3 or later <http://gnu.org/licenses/gpl.html>
This is free software: you are free to change and redistribute it.
There is NO WARRANTY, to the extent permitted by law.
# /usr/bin/qemu-system-x86_64 --version
QEMU emulator version 5.0.0
Copyright (c) 2003-2020 Fabrice Bellard and the QEMU Project developers
```
_______________________________________________
SeaBIOS mailing list -- seabios@seabios.org
To unsubscribe send an email to seabios-le...@seabios.org
