Re: [asterisk-users] T1 TE121 cable connected to a TN2464BP AVAYA card
Hello All I have found the issue in the Asterisk side, the errors I had in the cable and the dial plan errors, so everything is working fine now with the Te121 card and the AVAYA PBX, I will open a blog nest days to load the full process I had to do to have the service working, I will let you know the link ASAP. Thanks a lot for your help. Best regards Juan Cardoza De: asterisk-users-boun...@lists.digium.com [mailto:asterisk-users-boun...@lists.digium.com] En nombre de Erik de Wild Enviado el: Sábado, 05 de Septiembre de 2009 03:46 a.m. Para: Asterisk Users Mailing List - Non-Commercial Discussion Asunto: Re: [asterisk-users] T1 TE121 cable connected to a TN2464BP AVAYA card Not an answer to your question but maybe helpfull. If you use pri to connect two servers you might prefer the European way ( E1 ) instead of T1 because it will offer you 7 extra channels. As far as I know most pri cards support both. Be aware of the role each card has to play: one the telco role and the other the enduser role. See www.asteriskguru.com/tutorials/e1t1.HTML Erik de Wild Tripple-o Your Asterisk migration partner The Netherlands Op 4 sep 2009 om 23:23 heeft "Juan Cardoza" het volgende geschreven:\ Hello All I am looking for the cable I need to create to connect a TE121 card with a TN2464BP card (AVAYA ISDN Card), please let me know if someone have the information about this cable, my asterisk CLI show this: pri show span 1 Status: In Alarm, Down, Active And the card is in red, so I am thinking the problem is the card. Any idea??? Thanks John Teleperformance values: Integrity - Respect - Professionalism - Innovation – Commitment The information contained in this communication is privileged and confidential. The content is intended only for the use of the individual or entity named above. If the reader of this message is not the intended recipient, you are hereby notified that any dissemination, distribution or copying of this communication is strictly prohibited. If you have received this communication in error, please notify me immediately by telephone or e-mail, and delete this message from your systems. <http://webmail.tpmex.com/users/imagenes/Pictures/earth.png> Please consider the environmental impact of needlessly printing this e-mail. ___ -- Bandwidth and Colocation Provided by http://www.api-digital.com -- AstriCon 2009 - October 13 - 15 Phoenix, Arizona Register Now: http://www.astricon.net asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users Teleperformance values: Integrity - Respect - Professionalism - Innovation - Commitment The information contained in this communication is privileged and confidential. The content is intended only for the use of the individual or entity named above. If the reader of this message is not the intended recipient, you are hereby notified that any dissemination, distribution or copying of this communication is strictly prohibited. If you have received this communication in error, please notify me immediately by telephone or e-mail, and delete this message from your systems. Please consider the environmental impact of needlessly printing this e-mail.___ -- Bandwidth and Colocation Provided by http://www.api-digital.com -- AstriCon 2009 - October 13 - 15 Phoenix, Arizona Register Now: http://www.astricon.net asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
Re: [asterisk-users] T1 TE121 cable connected to a TN2464BP AVAYA card
Not an answer to your question but maybe helpfull. If you use pri to connect two servers you might prefer the European way ( E1 ) instead of T1 because it will offer you 7 extra channels. As far as I know most pri cards support both. Be aware of the role each card has to play: one the telco role and the other the enduser role. See www.asteriskguru.com/tutorials/e1t1.HTML Erik de Wild Tripple-o Your Asterisk migration partner The Netherlands Op 4 sep 2009 om 23:23 heeft "Juan Cardoza" het volgende geschreven:\ Hello All I am looking for the cable I need to create to connect a TE121 card with a TN2464BP card (AVAYA ISDN Card), please let me know if someone have the information about this cable, my asterisk CLI show this: pri show span 1 Status: In Alarm, Down, Active And the card is in red, so I am thinking the problem is the card. Any idea??? Thanks John Teleperformance values: Integrity - Respect - Professionalism - Innovation – Commitment The information contained in this communication is privileged and confidential. The content is intended only for the use of the individual or entity named above. If the reader of this message is not the intended recipient, you are hereby notified that any dissemination, distribution or copying of this communication is strictly prohibited. If you have received this communication in error, please notify me immediately by telephone or e-mail, and delete this message from your systems. Please consider the environmental impact of needlessly printing this e-mail. ___ -- Bandwidth and Colocation Provided by http://www.api-digital.com -- AstriCon 2009 - October 13 - 15 Phoenix, Arizona Register Now: http://www.astricon.net asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users ___ -- Bandwidth and Colocation Provided by http://www.api-digital.com -- AstriCon 2009 - October 13 - 15 Phoenix, Arizona Register Now: http://www.astricon.net asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
Re: [asterisk-users] T1 TE121 cable connected to a TN2464BP AVAYA card
In this moment I have asterisk rvvv First I had the alarms below: Sep 4 17:44:51] NOTICE[19916]: chan_dahdi.c:9915 handle_init_event: Alarm cleared on channel 1 [Sep 4 17:44:51] NOTICE[19916]: chan_dahdi.c:9915 handle_init_event: Alarm cleared on channel 2 [Sep 4 17:44:51] NOTICE[19916]: chan_dahdi.c:9915 handle_init_event: Alarm cleared on channel 3 . . [Sep 4 17:44:51] NOTICE[19916]: chan_dahdi.c:9915 handle_init_event: Alarm cleared on channel 23 Now I have the next notice: [Sep 4 17:44:51] NOTICE[19915]: chan_dahdi.c:2611 my_handle_dchan_exception: PRI got event: No more alarm (5) on D-channel of span 1 The card is on green light, I think the trunk group in the AVAYA PBX should be up, but not, I have out-of-service-NE Here is my configuration in the PBX: STATUS SIGNALING GROUP Group ID: 100 Active NCA-TSC Count: 0 Group Type: isdn-pri Active CA-TSC Count: 0 Signaling Type: facility associated signaling Group State: out-of-service Primary D-Channel Port: 02B0624Level 3 State: out-of-service Secondary D-Channel Port:Level 3 State: no-link DS1 CIRCUIT PACK Location: 02B06 Name: Asterisk Bit Rate: 1.544Line Coding: b8zs Line Compensation: 1 Framing Mode: d4 Signaling Mode: isdn-pri Connect: network TN-C7 Long Timers? n Country Protocol: 1 Interworking Message: PROGressProtocol Version: b Interface Companding: mulawCRC? n Idle Code: DCP/Analog Bearer Capability: 3.1kHz Slip Detection? n Near-end CSU Type: other Echo Cancellation? n TRUNK GROUP Group Number: 100 Group Type: isdn CDR Reports: y Group Name: Asterisk tieCOR: 1TN: 1TAC: 870 Direction: two-wayOutgoing Display? y Carrier Medium: PRI/BRI Dial Access? yBusy Threshold: 23Night Service: Queue Length: 23 Service Type: tie Auth Code? nTestCall ITC: rest Far End Test Line No: TestCall BCC: 4 TRUNK PARAMETERS Codeset to Send Display: 6 Codeset to Send National IEs: 6 Max Message Size to Send: 260 Charge Advice: none Supplementary Service Protocol: a Digit Handling (in/out): enbloc/enbloc Trunk Hunt: descend QSIG Value-Added? n Digital Loss Group: 13 Calling Number - Delete: Insert: Numbering Format: Bit Rate: 1200 Synchronization: asyncDuplex: full Disconnect Supervision - In? y Out? n Answer Supervision Timeout: 0 TRUNK FEATURES ACA Assignment? nMeasured: none Wideband Support? n Internal Alert? nMaintenance Tests? y Data Restriction? n NCA-TSC Trunk Member: Send Name: y Send Calling Number: y Used for DCS? n Suppress # Outpulsing? nNumbering Format: public Outgoing Channel ID Encoding: preferred UUI IE Treatment: service-provider Replace Restricted Numbers? n Replace Unavailable Numbers? n Send Connected Number: y Network Call Redirection: none Send UUI IE? n Send UCID? y Send Codeset 6/7 LAI IE? n Ds1 Echo Cancellation? y US NI Delayed Calling Name Update? y SBS? n Network (Japan) Needs Connect Before Disconnect? N How can I test the D-Channel in the asterisk side??? I believe the card is now up and the card in the AVAYA PBX is the problem, but I really dont have so much commands to check in the asterisk to see if the card is working correctly. Please let me know your comments. Best regards Jhon De: asterisk-users-boun...@lists.digium.com [mailto:asterisk-users-boun...@lists.digium.com] En nombre de Miguel Molina Enviado el: Viernes, 04 de Septiembre de 2009 05:02 p.m. Para: Asterisk Users Mailing List - Non-Commercial Discussion Asunto: Re: [asterisk-users] T1 TE121 cable connected to a TN2464BP AVAYA card Juan Cardoza escribió: Hello All I am looking for the cable I need to create to connect a TE121 card with a
Re: [asterisk-users] T1 TE121 cable connected to a TN2464BP AVAYA card
Juan Cardoza escribió: Hello All I am looking for the cable I need to create to connect a TE121 card with a TN2464BP card (AVAYA ISDN Card), please let me know if someone have the information about this cable, my asterisk CLI show this: pri show span 1 Status: In Alarm, Down, Active And the card is in red, so I am thinking the problem is the card. Any idea??? Thanks John First you can try with a straight Ethernet cable. It it doesn't work, you will need to buy or make a crossover RJ-48 like the shown below: T1 or E1 PRI crossover cable: (Taken from http://www.chebucto.ns.ca/Chebucto/Technical/Manuals/Max/max6000/gs/cables.htm): RJ48C/RJ48C Install this cable when the WAN interface transmits on pins 5 and 4 and receives on pins 2 and 1. Refer to Figure C-2 and Table C-5. Figure C-2. RJ48C/RJ48C crossover cable Table C-5. RJ48C/RJ48C crossover cable specifications That'll do. Cheers, -- Ing. Miguel Molina Grupo de Tecnología Millenium Phone Center ___ -- Bandwidth and Colocation Provided by http://www.api-digital.com -- AstriCon 2009 - October 13 - 15 Phoenix, Arizona Register Now: http://www.astricon.net asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
[asterisk-users] T1 TE121 cable connected to a TN2464BP AVAYA card
Hello All I am looking for the cable I need to create to connect a TE121 card with a TN2464BP card (AVAYA ISDN Card), please let me know if someone have the information about this cable, my asterisk CLI show this: pri show span 1 Status: In Alarm, Down, Active And the card is in red, so I am thinking the problem is the card. Any idea??? Thanks John Teleperformance values: Integrity - Respect - Professionalism - Innovation - Commitment The information contained in this communication is privileged and confidential. The content is intended only for the use of the individual or entity named above. If the reader of this message is not the intended recipient, you are hereby notified that any dissemination, distribution or copying of this communication is strictly prohibited. If you have received this communication in error, please notify me immediately by telephone or e-mail, and delete this message from your systems. Please consider the environmental impact of needlessly printing this e-mail.___ -- Bandwidth and Colocation Provided by http://www.api-digital.com -- AstriCon 2009 - October 13 - 15 Phoenix, Arizona Register Now: http://www.astricon.net asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users