RE: TCL Terminal
> -Original Message- > From: cctalk On Behalf Of Al Kossow via > cctalk > Sent: 25 November 2018 17:22 > To: cctalk@classiccmp.org > Subject: Re: TCL Terminal > > > > On 11/25/18 8:56 AM, Dave Wade via cctalk wrote: > > > I can't seem to get into ant set-up menus, and I am sure it used to > > show these, Does any one have any documents on these? > > try holding down the space bar on powerup > No > dumps of the firmware would be nice > I think that’s the only way I will find out if there is a setup menu. I am beginning to think it might be a dedicated function terminal with no config options. It does work as a terminal on but its not ANSI/VT. When I run EDIT on the VAX it goes into some graphics mode. I have put it on to my ToDo list but don't hold your breath. Dave G4UGM
Re: TCL Terminal
On 11/25/18 9:55 AM, Al Kossow via cctalk wrote: > 'TCL' are the initials of the person who created the first Ethernet > transceiver (Tat Lam). > > > https://books.google.com/books?id=ooBqdIXIqbwC=PA73=PA73 I note that the same section mentions Jim Theornton. I recall on a trip to CDC ARHOPS in Arden Hills, seeing a backhoe trenching around the employee parking lot. The path didn't make much sense, so I asked a co-worker about it. "Oh, that's Jim Thornton laying his coax loop."... --Chuck
Re: TCL Terminal
'TCL' are the initials of the person who created the first Ethernet transceiver (Tat Lam). https://books.google.com/books?id=ooBqdIXIqbwC=PA73=PA73 He also sold the first 10mbit transceiver and repeater. On 11/25/18 9:41 AM, Chuck Guzis via cctalk wrote: > Don't know the exact product, but TCL INc. was in Fremont, CA and was a > maker of various bits of LAN gear. > > --Chuck >
Re: TCL Terminal
Don't know the exact product, but TCL INc. was in Fremont, CA and was a maker of various bits of LAN gear. --Chuck
Re: TCL Terminal
On 11/25/18 9:22 AM, Al Kossow via cctalk wrote: > try holding down the space bar on powerup this also works to get into local test on the mtx 1483 i was able to get this to work with a Compaq 122-key kb but not with the 102-key telex kb I tried
Re: TCL Terminal
you accidentally included a pic of the memorex terminal as picture 1 so there isn't a picture of the back of the board. I'm assuming there is an AT keyboard connector on the TCL On 11/25/18 9:22 AM, Al Kossow via cctalk wrote: > > > On 11/25/18 8:56 AM, Dave Wade via cctalk wrote: > >> I can't seem to get into ant set-up menus, and I am sure it used to show >> these, Does any one have any documents on these? > > try holding down the space bar on powerup > > dumps of the firmware would be nice > >
Re: TCL Terminal
On 11/25/18 8:56 AM, Dave Wade via cctalk wrote: > I can't seem to get into ant set-up menus, and I am sure it used to show > these, Does any one have any documents on these? try holding down the space bar on powerup dumps of the firmware would be nice
