Re: [Shr-User] uSD hosed, on every unstable.
On Wed, Oct 13, 2010 at 9:15 AM, Al Johnson wrote: > Here's one of many smt tutorials on the net. These won't be the easiest bits > to start with though! If you've got a broken old motherboard or HDD to > practice on it would be well worth doing. > http://www.sparkfun.com/commerce/tutorial_info.php?tutorials_id=36&page=1 thats a great link. now i keep going back and forth between buy a new phone or fix my beloved moko ___ Openmoko community mailing list community@lists.openmoko.org http://lists.openmoko.org/mailman/listinfo/community
Re: soldering tutorial, was: Re: [Shr-User] uSD hosed, on every unstable.
On Wed, Oct 13, 2010 at 3:29 PM, Alfa21 wrote: > ooh sorry! > I forgot an important point: >> 6) put the resistor in place and keep it _gently_ pushing down with a small >> tool, like the point of a pin or similar (gently, otherwise you make it jump >> away!) > 7-) put some flux on the sides of your resistor >> 7) take your iron and pick up some but _little_ fresh alloy on the tip and >> then melt it on the first side of the resistor shit... i should just get some of this! FFWD to 9 min http://www.youtube.com/watch?v=Uov0SPHKcnk ___ Openmoko community mailing list community@lists.openmoko.org http://lists.openmoko.org/mailman/listinfo/community
Re: soldering tutorial, was: Re: [Shr-User] uSD hosed, on every unstable.
ooh sorry! I forgot an important point: > 6) put the resistor in place and keep it _gently_ pushing down with a small > tool, like the point of a pin or similar (gently, otherwise you make it jump > away!) 7-) put some flux on the sides of your resistor > 7) take your iron and pick up some but _little_ fresh alloy on the tip and > then melt it on the first side of the resistor -- ALFA21 IS PROVIDED "AS IS" AND WITHOUT WARRANTIES OF ANY KIND, EXPRESS OR IMPLIED. ___ Openmoko community mailing list community@lists.openmoko.org http://lists.openmoko.org/mailman/listinfo/community
soldering tutorial, was: Re: [Shr-User] uSD hosed, on every unstable.
> make model micro soldering tutorials? i would really really like to > fix this if i can. I think the size should be the same of the one needed for the buzz fix... about soldering eee... good luck! :P I made my buzz fix and it was a pain in the a**hole! [0) check your pcb and verify you still have the traces where you'll put the new resistor because maybe you ripped the metal out] 1) remove the board from all the plastic case 2) firmly fix it to a solid table with an adhesive tape 3) do not drink alcohol and keep calm ;) 4) use the sharpest newer soldering tool, 25W-30W 5) put a _little_ of alloy on the little squares of the pcb 6) put the resistor in place and keep it _gently_ pushing down with a small tool, like the point of a pin or similar (gently, otherwise you make it jump away!) 7) take your iron and pick up some but _little_ fresh alloy on the tip and then melt it on the first side of the resistor 8) do the other side of the resistor 9) verify that your resistor is firmly in place and you haven't leaked the alloy around and check any short-circuit the size is really tiny, so good luck and don't panic! you can put your resistor in any direction, it hasn't +/- polarity. be quick with the iron on your components otherwise you'll fry them! no more than 2-3 sec. you can cool down the components and do another try little later. I suggest you to use the eutectic alloy because it's easier to use on this hard size -- ALFA21 IS PROVIDED "AS IS" AND WITHOUT WARRANTIES OF ANY KIND, EXPRESS OR IMPLIED. ___ Openmoko community mailing list community@lists.openmoko.org http://lists.openmoko.org/mailman/listinfo/community
Re: Openmoko Beagle Hybrid - was: [Community Updates] 2010-08-01 is out
--- On Wed, 10/13/10, Dr. H. Nikolaus Schaller wrote: > Again good news: > > we have won one of the new PandaBoards (OMAP4 / ARM Coretx () Congratulations! Best regards, Boudewijn ___ Openmoko community mailing list community@lists.openmoko.org http://lists.openmoko.org/mailman/listinfo/community
Re: [Shr-User] uSD hosed, on every unstable.
On Wednesday 13 October 2010, jeremy jozwik wrote: > On Wed, Oct 13, 2010 at 6:22 AM, Al Johnson > > wrote: > > Judging by your photo and the component placement doc that would be R7507 > > which according to the schematic is 75R, and connects the SD_DATA0 pin on > > the connector to the chip. That certainly explains why your SD won't > > work! > > > > No - the 4 components are resistors not capacitors. The capacitor fix > > hasn't been needed since the full kernel fix that correctly implemented > > the Glamo's SD drive strength adjustment. > > > >> i have taken images and will upload them. but i wanted to put this out > >> first. > > R75707, well this is good and bad news. the good news, our developers > do indeed know what they are doing! > > the bad news, i need to try to solder something back on there. ok, so > its a resistor, any more information? > > make model micro soldering tutorials? i would really really like to > fix this if i can. You can find the schematic and layout documents here: http://downloads.openmoko.org/developer/schematics/GTA02/ 75 Ohm and the correct size are the critical bits. Resistor tolerance shouldn't be an issue. I think the size is 0402 but you can check this by measuring (ruler, magnifying glass) before you buy, or hope someone who actually knows replies ;-) Here's one of many smt tutorials on the net. These won't be the easiest bits to start with though! If you've got a broken old motherboard or HDD to practice on it would be well worth doing. http://www.sparkfun.com/commerce/tutorial_info.php?tutorials_id=36&page=1 ___ Openmoko community mailing list community@lists.openmoko.org http://lists.openmoko.org/mailman/listinfo/community
Re: [Shr-User] uSD hosed, on every unstable.
On Wed, Oct 13, 2010 at 3:11 AM, Matthias Guedemann wrote: > This does not seem to be the problem if I saw it correctly on your photo. > I also had problems with my sd card. Now I use a Kingston 8G, with two > partitions 1G / rest, all formatted as ext3. I use Qi, boot the kernel from SD > and use the additional boot parameters. > > I did not work for some time, producing errors, corrupting files and the > partition table etc., but after partitioning this way, installing using > *only* the first partition (2nd unformatted / unmounted) and making sure that > the cardholder is closed properly, it works for some time now. im not sure how much you have been fallowing this issue, basically all working combinations of old u-boot kernel and rootFS do not make the previously working card, work... this is on 3 different cards of different capacity. including the card that originally came with the phone. ___ Openmoko community mailing list community@lists.openmoko.org http://lists.openmoko.org/mailman/listinfo/community
Re: [Shr-User] uSD hosed, on every unstable.
On Wed, Oct 13, 2010 at 6:22 AM, Al Johnson wrote: > Judging by your photo and the component placement doc that would be R7507 > which according to the schematic is 75R, and connects the SD_DATA0 pin on the > connector to the chip. That certainly explains why your SD won't work! > No - the 4 components are resistors not capacitors. The capacitor fix hasn't > been needed since the full kernel fix that correctly implemented the Glamo's > SD drive strength adjustment. > >> i have taken images and will upload them. but i wanted to put this out >> first. R75707, well this is good and bad news. the good news, our developers do indeed know what they are doing! the bad news, i need to try to solder something back on there. ok, so its a resistor, any more information? make model micro soldering tutorials? i would really really like to fix this if i can. ___ Openmoko community mailing list community@lists.openmoko.org http://lists.openmoko.org/mailman/listinfo/community
Re: [Shr-User] uSD hosed, on every unstable.
On Wednesday 13 October 2010, jeremy jozwik wrote: > for those who care: > > today, for some reason, i decided to tear down my freerunner. when i > got the PCB board out i took a moment to look at the sd card reader. i > noticed of the 4 little black squares just next to the sd card reader, > only 3 of them seemed to be there. im thinking i must have popped one > off while trying to remove the micro sd card some time along the way. Judging by your photo and the component placement doc that would be R7507 which according to the schematic is 75R, and connects the SD_DATA0 pin on the connector to the chip. That certainly explains why your SD won't work! > since it seems like a simple fix, im wondering if the capacitor lister > in [1] is the same as the 4 lined up between the sd reader and the > battery connector. No - the 4 components are resistors not capacitors. The capacitor fix hasn't been needed since the full kernel fix that correctly implemented the Glamo's SD drive strength adjustment. > i have taken images and will upload them. but i wanted to put this out > first. ___ Openmoko community mailing list community@lists.openmoko.org http://lists.openmoko.org/mailman/listinfo/community
[qtmoko] pim import
Hello. During these days I'm trying to import/export pim data to/from qtmoko, but I've some problems. I've deleted all the contacts from the sim card, deleted them all from addressbook on sqlite db, and then imported a vcard file. The import looks successful, but after rebooting/unmounting the battery or the sim card, my addressbook looks full of duplicated entries, and those duplicates are not an exact copy of another record: the family name is cut after the 4th character, and among the different fields, only the telephone numbers appear, no email, address, category, etc. Weird to say, not all the original contacts have been duplicated (anyway they are the greatest part). How can I avoid getting all these duplicated records? Second issue: is there a way to import ical data into the calender and/or the todo of qtmoko? If yes, how? Thank you, urodelo ___ Openmoko community mailing list community@lists.openmoko.org http://lists.openmoko.org/mailman/listinfo/community
Re: New Phone Project (MiniMoko) : Which functionalities ?
Hello Gregoire, I'm Thomas, the one who sent an email to Alexandre for finding a way to "work" together. First, a really big ThankYou for responding directly here, everyone is happy to see that A.I. is a company near of its (future) consumers. This project is very exciting and a lot of people are ready to help on it. I think your idea of a childboard is one of the best way to follow, we could add a little slice of the MiniBook, fitting everything we want inside, without reinventing the wheel. (Yours is really cool!). So for starting to create such an addon, would it be possible to have some extra infos on the MID ? (Schemas, wiring diagrams or so ? ) The analysis of the MID board pictures helps a lot, but with those documents, we won't have to spend time doing reverse engineering ;-). I have a last question : When will it be possible to get first MiniBooks ? If we had one, it can be usefull for starting the job. Thanks again for your answer, your products, and your open mind. See you soon, Thomas HOCEDEZ / Asthro Openmoko-fr.org -- View this message in context: http://openmoko-public-mailinglists.1958.n2.nabble.com/New-Phone-Project-MiniMoko-Which-functionalities-tp5606912p5630763.html Sent from the Openmoko Community mailing list archive at Nabble.com. ___ Openmoko community mailing list community@lists.openmoko.org http://lists.openmoko.org/mailman/listinfo/community
Re: Openmoko Beagle Hybrid - was: [Community Updates] 2010-08-01 is out
Am 13.10.2010 um 10:01 schrieb Thomas HOCEDEZ: > On 13/10/2010 08:15, Dr. H. Nikolaus Schaller wrote: >> Again good news: >> >> we have won one of the new PandaBoards (OMAP4 / ARM Coretx A9) boards >> through the PandaBoard Early Adopter Program: >> >> http://omappedia.org/wiki/PandaBoard_Voting#PHASE-I_Winners >> >> http://omappedia.org/wiki/PEAP_Projects#Handheld_LCD_.26_GPS_.26_Navigation_Expansion_Board >> http://wiki.openmoko.org/wiki/Openmoko_Beagle_Hybrid >> >> Our goal is to adapt the hard- and software of the Openmoko Beagle Hybrid to >> this new board. This will give even more power to future Openmoko devices. >> >> Nikolaus >> >> Am 14.09.2010 um 10:50 schrieb Dr. H. Nikolaus Schaller: >> >> > > --> That's sound Excellent ! (still a lot of new work, but excellent news !) Thanks! It is like starting a new branch of the next "unstable" version of Debian. Needs a lot of work and time to get it through "testing" to "stable". So please don't expect results soon... The GTA04 will be finished before. We will report from time to time what we have achieved. The first step is to await that the PandaBoard arrives :) Well, it is the second step. The first is to study what we will get: http://pandaboard.org/sites/default/files/board_reference/EA1/Panda_Board_Spec_REVEA1_04.pdf Nikolaus ___ Openmoko community mailing list community@lists.openmoko.org http://lists.openmoko.org/mailman/listinfo/community
Re: Openmoko Beagle Hybrid - was: [Community Updates] 2010-08-01 is out
On 13/10/2010 08:15, Dr. H. Nikolaus Schaller wrote: > Again good news: > > we have won one of the new PandaBoards (OMAP4 / ARM Coretx A9) boards through > the PandaBoard Early Adopter Program: > > http://omappedia.org/wiki/PandaBoard_Voting#PHASE-I_Winners > > http://omappedia.org/wiki/PEAP_Projects#Handheld_LCD_.26_GPS_.26_Navigation_Expansion_Board > http://wiki.openmoko.org/wiki/Openmoko_Beagle_Hybrid > > Our goal is to adapt the hard- and software of the Openmoko Beagle Hybrid to > this new board. This will give even more power to future Openmoko devices. > > Nikolaus > > Am 14.09.2010 um 10:50 schrieb Dr. H. Nikolaus Schaller: > > --> That's sound Excellent ! (still a lot of new work, but excellent news !) Thomas >> Hi, >> you may wonder what has happened to the Openmoko Beagle Hybrid [1] mentioned >> in the August Community update (cited below). >> >> First of all we had some delay with our SMD assembly company. They had >> holidays >> on one hand and more work than expected (economy appears indeed to flourish >> again). But now we have 10 kits available to find a new home. >> >> And we received a BeagleBoard XM some days ago and started to test the OM >> Hybrid. >> >> We found two major issues so far: >> >> 1. the BB-XM already comes with connectors soldered to the board. >> Unfortunately Murphy's law did hit us and the BB-XM uses the opposite >> gender >> as our approach for mounting to the BB-C4. >> We now have to adjust for that (by finding a simple adapter solution). >> >> 2. the BB-XM uses a different version of the bootloader that is not >> compatible with our own code extensions [2]. >> So we have to fix that so that our SD card image works on the both, the >> older BB-C >> and the new BB-XM. >> >> Why is the BB-XM important at all, considering that the BB-C4 is still >> available >> and a little cheaper? Well, the BB-XM comes with a new DM3730 processor >> (1 GHz ARM Cortex A8), has a built-in USB/Ethernet hub for 4 ports and a >> built-in RS232 converter. This makes it even more simple to experiment with >> Bluetooth, WiFi, UMTS sticks connected to the Openmoko Beagle Hybrid >> while still having a portable design (using an external battery pack) to do >> experiments. >> >> So we work on these issues and just need some more days to solve them. >> >> Nikolaus >> >> [1]: http://wiki.openmoko.org/wiki/Openmoko_Beagle_Hybrid >> [2]: http://projects.goldelico.com/p/ombeagle/ >> >> Am 04.08.2010 um 10:28 schrieb Timo Jyrinki: >> >> >>> Newest community update now available at >>> http://wiki.openmoko.org/wiki/Community_Updates/2010-08-01 and >>> simplified text version below. >>> >>> >> >>> Community >>> >>> Most important and change making mails on the mailing lists, blogs >>> etc.. Coolest hacks, screenshots, themes etc.. >>> >>>* Golden Delicious Computers released Openmoko Beagle Hybrid >>> Boards including GPS and a gyroscope. At the same time, they announced >>> - http://lists.openmoko.org/pipermail/community/2010-July/062609.html >>> - plans to develop the next open hardware phone. Based on a OMAP3530 >>> SoC this device will bring a lot of computing power to your pocket. >>> >> >> ___ >> Smartphones-userland mailing list >> smartphones-userl...@linuxtogo.org >> http://lists.linuxtogo.org/cgi-bin/mailman/listinfo/smartphones-userland >> > > ___ > Openmoko community mailing list > community@lists.openmoko.org > http://lists.openmoko.org/mailman/listinfo/community > ___ Openmoko community mailing list community@lists.openmoko.org http://lists.openmoko.org/mailman/listinfo/community
Re: Re: Openmoko Beagle Hybrid - was: [Community Updates] 2010-08-01 is out
> we have won one of the new PandaBoards (OMAP4 / ARM Coretx A9) boards > through the PandaBoard Early Adopter Program: Congratulations! This is good news, indeed. -- n...@el-hennig.de Lubarsky's Law of Cybernetic Entomology: There's always one more bug. ___ Openmoko community mailing list community@lists.openmoko.org http://lists.openmoko.org/mailman/listinfo/community